Structural characterization and hydrolytic degradation of a Zn metal initiated copolymer of L-lactide and ε-caprolactone
The DOI matches its Crossref record; 6 of the 6 references it cites were found in a registry or an index.
Abstract
A bioresorbable aliphatic polyester was synthesized by bulk copolymerization of a 1/1 M/M L,L-lactide/epsilon-caprolactone mixture using zinc metal as initiator. The actual composition of the copolymer was found to be 1.5/1 as deduced from 1H NMR spectra obtained in DMSO-d6 solutions where higher resolution was obtained as compared with chlorinated solvents. Resonances due to L-lactyl units (L) exhibited triads stereosensitivity, epsilon-oxycaproyl units (C) being sensitive to dyads. Average lengths of both poly(lactic acid) and polycaprolactone sequences were evaluated and showed the presence of rather long PLA blocks. Furthermore, no CLC triad signal was found, suggesting the absence of transesterification rearrangements. 10 x 10 x 2 mm specimens made of the copolymer were allowed to age in isoosmolar pH = 7.4 phosphate buffer at 37 degrees C. Degradation was monitored by various analytical techniques such as SEC, X-ray diffractometry, DSC, and 1H NMR. Data were compared with the behaviour of PCL and PLA homopolymers allowed to age under similar conditions. Crystallinity and composition changes are discussed in terms of preferential degradation in L- and C-containing amorphous domains, crystallized long PLA blocks being much more resistant.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Fischer, E. W., Sterzel, H. J., & Wegner, G. (1973) · Kolloid-Zeitschrift und Zeitschrift für Polymere · doi:10.1007/bf01498927 · Cited by 1,704
Biodegradable polymers for use in surgery—polyglycolic/poly(actic acid) homo- and copolymers: 1
Gilding, D. K., & Reed, A. M. (1979) · Polymer · doi:10.1016/0032-3861(79)90009-0 · Cited by 1,345
Pitt, G. G., Gratzl, M. M., Kimmel, G. L., Surles, J., & Sohindler, A. (1981) · Biomaterials · doi:10.1016/0142-9612(81)90060-0 · Cited by 857
Li, S. M., Garreau, H., & Vert, M. (1990) · Journal of Materials Science: Materials in Medicine · doi:10.1007/bf00700871 · Cited by 733
Self-citationMiller, R. A., Brady, J. M., & Cutright, D. E. (1977) · Journal of Biomedical Materials Research · doi:10.1002/jbm.820110507 · Cited by 722
Polymerization temperature effects on the properties of l-lactide and ?-caprolactone copolymers
Grijpma, D. W., & Pennings, A. J. (1991) · Polymer Bulletin · doi:10.1007/bf00316903 · Cited by 165
Cited by
Properties of lactic acid based polymers and their correlation with composition
Södergård, A., & Stolt, M. (2002) · Progress in Polymer Science · doi:10.1016/s0079-6700(02)00012-6 · Cited by 1,461
Starch-based completely biodegradable polymer materials
Lu, D. R., Xiao, C. M., & Xu, S. J. (2009) · Express Polymer Letters · doi:10.3144/expresspolymlett.2009.46 · Cited by 735
Huang, M.-H., Li, S., & Vert, M. (2004) · Polymer · doi:10.1016/j.polymer.2004.10.054 · Cited by 222
Self-citationDobrzynski, P., Li, S., Kasperczyk, J., Bero, M., Gasc, F., & Vert, M. (2005) · Biomacromolecules · doi:10.1021/bm0494592 · Cited by 110
Self-citationFernández, J., Larrañaga, A., Etxeberria, A., Wang, W., & Sarasua, J. R. (2014) · Journal of Biomedical Materials Research Part A · doi:10.1002/jbm.a.35036 · Cited by 45
Metadata
- Authors
- Li, S. M., Espartero, J. L., Foch, P., & Vert, M.
- Venue
- Journal of Biomaterials Science, Polymer Edition
- Publisher
- Informa UK Limited
- Published
- 1997-01
- Volume
- 8
- Issue
- 3
- Pages
- 165-187
- ISSN
- 0920-5063 (ISSN-L)
- 1568-5624
- OpenAlex
- W1977791181
- Cited by
- 65
- References
- 6
- FWCI
- 0.74
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: Structural characterization and hydrolytic degradation of a Zn metal initiated copolymer of L-lactide and ε-caprolactone. https://app.cochat.ai/papers/10.1163/156856296x00237
- The paper
- Li, S. M., Espartero, J. L., Foch, P., & Vert, M. (1997). Structural characterization and hydrolytic degradation of a Zn metal initiated copolymer of L-lactide and ε-caprolactone. Journal of Biomaterials Science, Polymer Edition. https://doi.org/10.1163/156856296x00237
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.