Influence of Incorporation of Antibacterial Monomer on Curing Behavior of a Dental Composite
The DOI matches its Crossref record; 16 of the 16 references it cites were found in a registry or an index.
Abstract
A newly developed monomer, methacryloyloxdodecylpyridinium bromide (MDPB), has an antibacterial activity against oral streptococci, and this monomer can be active even after being immobilized as one component of a cured composite. The purpose of this study was to investigate the influence of incorporation of MDPB on the curing behavior of Bis-GMA-based composites. Depth of cure, degree of cure, light-attenuating effect, and surface hardness of composites incorporating 0.4 or 0.5% MDPB were measured and compared with those of a control material without MDPB. Depth of cure of composites with MDPB, measured by means of a penetrometer, was greater than for the control (p < 0.05). Differential thermal analysis showed that composites with MDPB had a significantly greater degree of cure than the control (p < 0.05). The light-attenuating effect of MDPB composites was less than for the control (p < 0.05). No significant difference between experimental and control was obtained with respect to Vickers hardness after both one day's and seven days' storage in water. These results indicate that the incorporation of small quantities of MDPB into Bis-GMA-based composites did not adversely affect the cure performance. On the contrary, a significant, though small, improvement was observed.
Overview
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
Claims other papers make about this one
Each is checked against this paper’s own text: does it say what the citing paper says it does?
In the citing paper
“To address the growing need for antibacterial dental materials, a useful approach is to permanently copolymerize QACs with resin materials by forming covalent bonds with the polymer network. Such stable non-leaching antibacterial materials can provide long-term protection via contact of the microorganisms with the biocidal surface, without sacrificing the mechanical properties and polymerization”
From Quaternary ammonium-based biomedical materials: State-of-the-art, toxicological aspects and antimicrobial resistance (2017) · cites this paper as [226]
Citations
Cites
Ferracane, J. L., & Greener, E. H. (1984) · Journal of Dental Research · doi:10.1177/00220345840630081901 · Cited by 319
Incorporation of bacterial inhibitor into resin composite
Imazato, S., Torii, M., Tsuchitani, Y., McCabe, J. F., & Russell, R. R. B. (1994) · Journal of Dental Research · doi:10.1177/00220345940730080701 · Cited by 316
Self-citationAntibiotic-impregnated acrylic bone cement
Marks, K., Nelson, C., & Lautenschlager, E. (1976) · The Journal of Bone & Joint Surgery · doi:10.2106/00004623-197658030-00011 · Cited by 260 · cited 1×
“, 1983) but also for orthopedic use (Marks et al., 1976; Chapman and Hadley, 1976; Elson et al., 1977; Oga et al., 1992; Lyons et al., 1992).”
BackgroundFactors affecting the quantity of remaining double bonds in restorative resin polymers
ASMUSSEN, E. (1982) · European Journal of Oral Sciences · doi:10.1111/j.1600-0722.1982.tb00767.x · Cited by 255
Antibacterial and mechanical properties of restorative materials combined with chlorhexidines
JEDRYCHOWSKI, J. R., CAPUTO, A. A., & KERPER, S. (1983) · Journal of Oral Rehabilitation · doi:10.1111/j.1365-2842.1983.tb00133.x · Cited by 211
Antibiotic-loaded acrylic cement
Elson, R., Jephcott, A., McGechie, D., & Verettas, D. (1977) · The Journal of Bone and Joint Surgery. British volume · doi:10.1302/0301-620x.59b2.873980 · Cited by 179
Extent of Polymerization of Dental Resins by Differential Scanning Calorimetry
Antonucci, J. M., & Toth, E. E. (1983) · Journal of Dental Research · doi:10.1177/00220345830620020701 · Cited by 137
Output from Visible-light Activation Units and Depth of Cure of Light-activated Composites
McCabe, J. F., & Carrick, T. E. (1989) · Journal of Dental Research · doi:10.1177/00220345890680111301 · Cited by 127
Self-citationCure performance of light-activated composites by differential thermal analysis (DTA)
McCabe, J. F. (1985) · Dental Materials · doi:10.1016/s0109-5641(85)80048-8 · Cited by 105 · cited 1×
“Degree of cure (conversion) and curing time of each composite were determined by means of DTA, with a divided fiber-optic system (McCabe, 1985).”
MethodSelf-citationADDY, M., & HANDLEY, R. (1981) · Journal of Oral Rehabilitation · doi:10.1111/j.1365-2842.1981.tb00488.x · Cited by 82
Research works printed but not linked: 3
- Asmussen E., 1982, Scand J Dent Res, 90, 490
- Imazato S., 1992, J Dent Res, 71, 721
- Imazato S., 1993, Dentjpn, 30, 63
Cited by
Resin composites in dentistry: the monomer systems
Peutzfeldt, A. (1997) · European Journal of Oral Sciences · doi:10.1111/j.1600-0722.1997.tb00188.x · Cited by 1,001
Jiao, Y., Niu, L.-N., Ma, S., Li, J., Tay, F. R., & Chen, J.-H. (2017) · Progress in Polymer Science · doi:10.1016/j.progpolymsci.2017.03.001 · Cited by 639
“Such stable non-leaching antibacterial materials can provide long-term protection via contact of the microorganisms with the biocidal surface, without sacrificing the mechanical properties and polymerization behavior of the original non-antibacterial resin formulations [70, 226] .”
BackgroundBiofilm Formation on Dental Restorative and Implant Materials
Busscher, H. J., Rinastiti, M., Siswomihardjo, W., & van der Mei, H. C. (2010) · Journal of Dental Research · doi:10.1177/0022034510368644 · Cited by 472
“This material inactivated bacteria upon coming into contact with its surface, hence inhibiting biofilm formation on the composite surface (Imazato and McCabe, 1994; Imazato et al., 1994, 1999), even after contact with saliva (Ebi et al.”
BackgroundAntibacterial properties of resin composites and dentin bonding systems
Imazato, S. (2003) · Dental Materials · doi:10.1016/s0109-5641(02)00102-1 · Cited by 447
Self-citationCurrent Trends in Dental Composites
Ferracane, J. L. (1995) · Critical Reviews in Oral Biology & Medicine · doi:10.1177/10454411950060040301 · Cited by 437
Metadata
- Authors
- Imazato, S., & McCabe, J. F.
- Affiliations
- Newcastle University (GB)
- ORCID
- Imazato, S.
- Venue
- Journal of Dental Research
- Publisher
- SAGE Publications
- Published
- 1994-10
- Volume
- 73
- Issue
- 10
- Pages
- 1641-1645
- ISSN
- 0022-0345 (ISSN-L)
- 1544-0591
- OpenAlex
- W1751948390
- Cited by
- 106
- References
- 16
- Citations by year
- 2026: 1 · 2024: 3 · 2023: 2 · 2022: 1 · 2021: 4 · 2020: 7 · 2019: 5 · 2018: 6 · 2017: 5 · 2016: 2 · 2015: 9 · 2014: 2 · 2013: 6 · 2012: 3
- FWCI
- 5.42
- Type
- journal article
- Language
- en
- Open access
- closed
- Licence
- journals.sagepub.com/page/policies/text-and-data-mining-license (tdm)
- Locations
- Journal of Dental Research (publishedVersion)
- PubMed (publishedVersion)
- Topics
- Health Sciences › Dentistry › General Dentistry › Dental materials and restorations
- Physical Sciences › Chemistry › Organic Chemistry › Photopolymerization techniques and applications
- Physical Sciences › Materials Science › Polymers and Plastics › Epoxy Resin Curing Processes
- Keywords
- antibacterial monomer, dental composites, Bis-GMA, curing behavior, depth of cure, degree of cure, light attenuation, Vickers hardness, oral streptococci, photopolymerization
- MeSH terms
- Analysis of Variance, Anti-Infective Agents, Local, Chemistry, Physical, Differential Thermal Analysis, Hardness, Light, Materials Testing, Polyethylene Glycols, Polymethacrylic Acids, Pyridinium Compounds, Surface Properties, Time Factors, Viscosity, Bisphenol A-Glycidyl Methacrylate, Chemical Phenomena
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: Influence of Incorporation of Antibacterial Monomer on Curing Behavior of a Dental Composite. https://app.cochat.ai/papers/10.1177/00220345940730100901
- The paper
- Imazato, S., & McCabe, J. F. (1994). Influence of Incorporation of Antibacterial Monomer on Curing Behavior of a Dental Composite. Journal of Dental Research. https://doi.org/10.1177/00220345940730100901
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.