Analysis of the time course of degradation for fully biobased nonwoven agricultural mulches in compost-enriched soil
The DOI matches its Crossref record; 46 of the 46 references it cites were found in a registry or an index.
Abstract
The time course of degradation for biodegradable and fully biobased plastic agricultural mulches prepared from polylactic acid (PLA) and PLA–polyhydroxyalkanoate (PHA) blends using meltblown (MB) nonwovens processing technology in compost-enriched soil during a 45 week burial duration was investigated under controlled conditions in a greenhouse to better understand the underlying mechanism for degradation. Mulches underwent an initial 4 week period during which the tensile strength decreased by ≥ 60%. For MB-PLA, between weeks 4 and 12, the crystallinity increased and the molecular weight slightly increased. After 12 weeks, the molecular weight decreased linearly. At 28 weeks, the crystallinity increased significantly, corresponding to an observed increase of macroscopic fragmentation. For MB-PLA+PHA, the mass fraction of PHA decreased significantly (by 11.6%) during the first 4 weeks; subsequently; the PHA fraction decreased linearly. Between 17 and 22 weeks, a large increase of crystallinity for the PLA component and a decrease of molecular weight occurred. After 22 weeks, the molecular weight and crystallinity of PLA increased nearly linearly. These results suggest that during the first 4–12 weeks, microorganisms begin to utilize the more readily available components of the mulches as carbon sources: amorphous PLA regions and PHA for MB-PLA and PLA+PHA, respectively, and that microbial activity is greater and occurs more strongly for PHA. After the initial induction period, depolymerization occurs slowly and steadily for both MB plastic mulches.
Overview
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
Claims other papers make about this one
Each is checked against this paper’s own text: does it say what the citing paper says it does?
In the citing paper
“Many studies have shown that the bio-based feedstocks commonly used in BDMs can significantly reduce the mulch mechanical properties, including elongation and breaking force [37][38][39].”
From Soil-Biodegradable Plastic Mulches Undergo Minimal in-Soil Degradation in a Perennial Raspberry System after 18 Months (2020) · cites this paper as [37]
Citations
Cites
An overview of the recent developments in polylactide (PLA) research
Madhavan Nampoothiri, K., Nair, N. R., & John, R. P. (2010) · Bioresource Technology · doi:10.1016/j.biortech.2010.05.092 · Cited by 2,448
Tokiwa, Y., Calabia, B. P., Ugwu, C. U., & Aiba, S. (2009) · International Journal of Molecular Sciences · doi:10.3390/ijms10093722 · Cited by 1,782
Mechanisms of polymer degradation and erosion
Göpferich, A. (1996) · Biomaterials · doi:10.1016/0142-9612(96)85755-3 · Cited by 1,781
Fischer, E. W., Sterzel, H. J., & Wegner, G. (1973) · Kolloid-Zeitschrift und Zeitschrift für Polymere · doi:10.1007/bf01498927 · Cited by 1,704
Polyethylene and biodegradable mulches for agricultural applications: A review
Kasirajan, S., & Ngouajio, M. (2012) · Agronomy for Sustainable Development · doi:10.1007/s13593-011-0068-3 · Cited by 1,353 · cited 5×
“The authors’ BDMs are therefore 100% biobased, in contrast to commercially available BDMs, which frequently contain fossil fuelderived polymers such as PBAT and PBS.(3,4,6,13) Nonwoven fabrics are sheets, webs, or batts consisting of randomly-oriented fibers or filaments, bonded either by friction, cohesion, adhesion,…”
BackgroundInfluentialThompson, R. C., Swan, S. H., Moore, C. J., & vom Saal, F. S. (2009) · Philosophical Transactions of the Royal Society B: Biological Sciences · doi:10.1098/rstb.2009.0054 · Cited by 1,294 · cited 1×
“Plastic debris released into the environment persists for many years due to their poor biodegradability, and serves as a hazard to micro- and macro-organisms via ingestion and entanglement.(4,9,10) Undesirable alternatives exist for the ultimate disposal of conventional mulches: landfilling, on-farm stockpiling, or bu…”
BackgroundPLastic Films for Agricultural Applications
Espí, E., Salmerón, A., Fontecha, A., García, Y., & Real, A. I. (2006) · Journal of Plastic Film & Sheeting · doi:10.1177/8756087906064220 · Cited by 395 · cited 3×
“starches, polyhydroxyalkanoates (PHAs), polybutylene succinate (PBS), and polybutylene adipate terephthalate (PBAT)).(3,4,6,13) BDMs can potentially be plowed into the soil at the end of their service life, after which they will ideally undergo full microbial assimilation into CO2 and water within 2 years (per ASTM WK…”
BackgroundPlastics: Modifying the Microclimate for the Production of Vegetable Crops
Lamont, W. J. (2005) · HortTechnology · doi:10.21273/horttech.15.3.0477 · Cited by 391 · cited 1×
“6 million metric tons in 2004).(1,2) Mulches provide several useful services: weed prevention, protection from evaporative moisture loss and soil erosion, and control of soil temperature.”
BackgroundKaramanlioglu, M., & Robson, G. D. (2013) · Polymer Degradation and Stability · doi:10.1016/j.polymdegradstab.2013.07.004 · Cited by 301
Rudnik, E., & Briassoulis, D. (2011) · Industrial Crops and Products · doi:10.1016/j.indcrop.2010.12.031 · Cited by 272 · cited 1×
“The trend exhibited in Figure 4 for Tg is similar to the trend reported for soil degradation of PLA films.(53) The time course data for soil burial degradation of MB-PLA+PHA possesses similarities and differences in trend to that of MB-PLA (Figure 4(b)).”
ResultPlastics in the Marine Environment
Gregory, M. R., & Andrady, A. L. (2003) · Plastics and the Environment · doi:10.1002/0471721557.ch10 · Cited by 252
Saito, Y., & Doi, Y. (1994) · International Journal of Biological Macromolecules · doi:10.1016/0141-8130(94)90022-1 · Cited by 239
Kijchavengkul, T., & Auras, R. (2008) · Polymer International · doi:10.1002/pi.2420 · Cited by 193
Hakkarainen, M., Karlsson, S., & Albertsson, A. (2000) · Polymer · doi:10.1016/s0032-3861(99)00393-6 · Cited by 161
Biodegradation behavior of P(3HB,4HB)/PLA blends in real soil environments
Weng, Y.-X., Wang, L., Zhang, M., Wang, X.-L., & Wang, Y.-Z. (2013) · Polymer Testing · doi:10.1016/j.polymertesting.2012.09.014 · Cited by 158
Microbial synthesis and characterization of poly(3-hydroxybutyrate-co-4-hydroxybutyrate)
Nakamura, S., Doi, Y., & Scandola, M. (1992) · Macromolecules · doi:10.1021/ma00043a001 · Cited by 155
Rudnik, E., & Briassoulis, D. (2011) · Journal of Polymers and the Environment · doi:10.1007/s10924-010-0243-7 · Cited by 149
Degradation of potentially biodegradable plastic mulch films at three diverse U.S. locations
Li, C., Moore-Kucera, J., Miles, C., Leonas, K., Lee, J., Corbin, A., & Inglis, D. (2014) · Agroecology and Sustainable Food Systems · doi:10.1080/21683565.2014.884515 · Cited by 132
Critical Review of Norms and Standards for Biodegradable Agricultural Plastics Part II: Composting
Briassoulis, D., Dejean, C., & Picuno, P. (2010) · Journal of Polymers and the Environment · doi:10.1007/s10924-010-0222-z · Cited by 125 · cited 1×
“6 million metric tons in 2004).(1,2) Mulches provide several useful services: weed prevention, protection from evaporative moisture loss and soil erosion, and control of soil temperature.”
BackgroundNapper, I. E., & Thompson, R. C. (2023) · Annual Review of Environment and Resources · doi:10.1146/annurev-environ-112522-072642 · Cited by 125
An Investigation of Poly(lactic acid) Degradation
Zhang, X., Wyss, U. P., Pichora, D., & Goosen, M. F. A. (1994) · Journal of Bioactive and Compatible Polymers · doi:10.1177/088391159400900105 · Cited by 122
Miles, C., Wallace, R., Wszelaki, A., Martin, J., Cowan, J., Walters, T., & Inglis, D. (2012) · HortScience · doi:10.21273/hortsci.47.9.1270 · Cited by 118
Focarete, M. L., Ceccorulli, G., Scandola, M., & Kowalczuk, M. (1998) · Macromolecules · doi:10.1021/ma981115e · Cited by 112
Goldberger, J. R., Jones, R. E., Miles, C. A., Wallace, R. W., & Inglis, D. A. (2015) · Renewable Agriculture and Food Systems · doi:10.1017/s1742170513000276 · Cited by 103 · cited 1×
“However, the adoption of BDMs as substitutes for conventional polyethylene mulches has been hindered by several key barriers: higher cost, insufficient information, and unpredictable breakdown: either too early, during deployment, or an unacceptably slow soil degradation rate.(19) The authors have developed BDMs from…”
BackgroundBiodegradable Agricultural Mulches Derived from Biopolymers
Hayes, D. G., Dharmalingam, S., Wadsworth, L. C., Leonas, K. K., Miles, C. A., & Inglis, D. A. (2012) · ACS symposium series · doi:10.1021/bk-2012-1114.ch013 · Cited by 99 · cited 4×
“starches, polyhydroxyalkanoates (PHAs), polybutylene succinate (PBS), and polybutylene adipate terephthalate (PBAT)).(3,4,6,13) BDMs can potentially be plowed into the soil at the end of their service life, after which they will ideally undergo full microbial assimilation into CO2 and water within 2 years (per ASTM WK…”
BackgroundInfluentialSelf-citationHu, Y., Sato, H., Zhang, J., Noda, I., & Ozaki, Y. (2008) · Polymer · doi:10.1016/j.polymer.2008.07.031 · Cited by 97 · cited 8×
“PHA was incorporated into PLA-based BDMs due to its greater biodegradability in ambient soil compared to PLA, and its ability to counteract the inherent brittleness and crystallinity of PLA.(23,24) The authors’ BDMs are therefore 100% biobased, in contrast to commercially available BDMs, which frequently contain fossi…”
MethodInfluentialHablot, E., Dharmalingam, S., Hayes, D. G., Wadsworth, L. C., Blazy, C., & Narayan, R. (2014) · Journal of Polymers and the Environment · doi:10.1007/s10924-014-0697-0 · Cited by 87 · cited 4×
“after simulated weathering, which reflected the cleavage of ester bonds by hydrolysis and photodegradation.(34) To better understand the relationship between the changes in the time course of the measured parameters, the percent change of measured parameters versus soil burial time from Tables 2–4 were co-plotted for…”
BackgroundMethodResultInfluentialSelf-citationSoil Degradation of Polylactic Acid/Polyhydroxyalkanoate-Based Nonwoven Mulches
Dharmalingam, S., Hayes, D. G., Wadsworth, L. C., Dunlap, R. N., DeBruyn, J. M., Lee, J., & Wszelaki, A. L. (2015) · Journal of Polymers and the Environment · doi:10.1007/s10924-015-0716-9 · Cited by 68 · cited 11×
“This result was unexpected, because poly-3-hydroxy butyrate is more readily biodegraded than poly4-hydroxy butyrate,(49,50) and the trend is the opposite of that observed for a SB-PLA+PHA BDM.(32) For both MB BDMs, tensile strength decreased rapidly, with >60% of tensile strength lost during the first four weeks.”
BackgroundMethodResultInfluentialSelf-citationJandas, P. J., Mohanty, S., & Nayak, S. K. (2013) · Industrial & Engineering Chemistry Research · doi:10.1021/ie4023429 · Cited by 65 · cited 9×
“PHA was incorporated into PLA-based BDMs due to its greater biodegradability in ambient soil compared to PLA, and its ability to counteract the inherent brittleness and crystallinity of PLA.(23,24) The authors’ BDMs are therefore 100% biobased, in contrast to commercially available BDMs, which frequently contain fossi…”
BackgroundMethodInfluentialBiodegradable Mulches from Renewable Resources
Shogren, R. L. (2000) · Journal of Sustainable Agriculture · doi:10.1300/j064v16n04_05 · Cited by 64
Polylactic Acid (PLA)-Degrading Microorganisms and PLA Depolymerases
Kawai, F. (2010) · ACS Symposium Series · doi:10.1021/bk-2010-1043.ch027 · Cited by 64
Novel Properties of PLA Fibers
Dugan, J. S. (2001) · International Nonwovens Journal · doi:10.1177/1558925001os-01000308 · Cited by 62
Field Evaluation of Watermelon Grown on Paper-Polymerized Vegetable Oil Mulches
Shogren, R. L., & Hochmuth, R. C. (2004) · HortScience · doi:10.21273/hortsci.39.7.1588 · Cited by 58 · cited 1×
“Plastic debris released into the environment persists for many years due to their poor biodegradability, and serves as a hazard to micro- and macro-organisms via ingestion and entanglement.(4,9,10) Undesirable alternatives exist for the ultimate disposal of conventional mulches: landfilling, on-farm stockpiling, or bu…”
BackgroundEffect of high pressure treatment on thermal properties of polylactides
Ahmed, J., Varshney, S. K., Zhang, J., & Ramaswamy, H. S. (2009) · Journal of Food Engineering · doi:10.1016/j.jfoodeng.2009.01.026 · Cited by 55
Mechanical Behavior of Thru-air Bonded Nonwoven Structures
Rawal, A., Lomov, S. V., Ngo, T. H., Verpoest, I., & Vankerrebrouck, J. (2007) · Textile Research Journal · doi:10.1177/0040517507081313 · Cited by 55
Cowan, J. S., Miles, C. A., Andrews, P. K., & Inglis, D. A. (2013) · Journal of the Science of Food and Agriculture · doi:10.1002/jsfa.6504 · Cited by 54
Hussain, I., & Hamid, H. S. (2003) · Wiley eBooks · doi:10.1002/0471721557.ch5 · Cited by 48
Effect of fiber orientation on pore size characteristics of nonwoven structures
Rawal, A., Rao, P. V. K., Russell, S. J., & Jeganathan, A. (2010) · Journal of Applied Polymer Science · doi:10.1002/app.32608 · Cited by 41
Cowan, J. S., Inglis, D. A., & Miles, C. A. (2013) · HortTechnology · doi:10.21273/horttech.23.6.849 · Cited by 38
LIFE CYCLE ASSESSMENT OF COMMON USED AGRICULTURAL PLASTIC PRODUCTS IN THE EU
Bos, U., Makishi, C., & Fischer, M. S. (2008) · Acta Horticulturae · doi:10.17660/actahortic.2008.801.35 · Cited by 27
Agronomic Potential of Biopolymer Films
Martín‐Closas, L., & Pelacho, A. M. (2011) · Biopolymers – New Materials for Sustainable Films and Coatings · doi:10.1002/9781119994312.ch13 · Cited by 26
Use of Plastic Mulch and Row Covers in Vegetable Production
Shrefler, J., & Brandenberger, L. (2014) · SHAREOK (University of Oklahoma; Oklahoma State University; Central Oklahoma University) · Cited by 25
Dharmalingam, S. (2014) · Cited by 11
Self-citationThe Application of PLA Resin on Nonwovens Production
Feng, S., & Jiao, X. N. (2011) · Advanced materials research · doi:10.4028/www.scientific.net/amr.332-334.1239 · Cited by 10
Research Progress of Elastic Nonwovens with Meltblown Technology
Li, L., Zhang, J., Li, S., & Qian, X. M. (2011) · Advanced materials research · doi:10.4028/www.scientific.net/amr.332-334.1247 · Cited by 8
Research works printed but not linked: 7
- Lemieux PM, 1997, Evaluation of emissions from the open burning of household waste in barrels. EPA report 600/R-97-134a
- Corbin AT, 2013, eXtension Found eOrg Community Pract, 67951
- Khan AYA, 1995, Int Nonwovens J, 7, 69
- Dugan JS, 2001, Int Nonwovens J, 10, 29
- Rani A, 2007, Synth Fibres, 36, 6
- Ji X, 2013, HortScience, 48, S335
- Wadsworth LC, 2013, J Eng Fibers Fabrics, 8, 50
Cited by
Polymers Use as Mulch Films in Agriculture—A Review of History, Problems and Current Trends
Mansoor, Z., Tchuenbou-Magaia, F., Kowalczuk, M., Adamus, G., Manning, G., Parati, M., Radecka, I., & Khan, H. (2022) · Polymers · doi:10.3390/polym14235062 · Cited by 183
Afshar, S. V., Boldrin, A., Astrup, T. F., Daugaard, A. E., & Hartmann, N. B. (2023) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2023.140000 · Cited by 200
“…and Dejean, 2010; Ng et al., 2022; Catarci Carteny and Blust, 2021; Liao and Chen, 2021; Beltr ´ a et al., 2021; Anunciado et al., 2021b; Dharmalingam et al., 2016; Artru and Lecerf, 2019; Griffin-LaHue et al., 2022; Abioye et al., 2019a; Barrag ´ a et al., 2016; Delacuvellerie et al.,…”
BackgroundInfluentialSoil burial-induced degradation of cellulose films in a moisture-controlled environment
Rumi, S. S., Liyanage, S., & Abidi, N. (2024) · Scientific Reports · doi:10.1038/s41598-024-57436-w · Cited by 90
“With an increase in soil burial time, microorganisms opened the structure of cellulose 15 , which resulted in macroscopic degradation and a loss of tensile properties.”
BackgroundMethodInfluentialAnunciado, M. B., Hayes, D. G., Astner, A. F., Wadsworth, L. C., Cowan-Banker, C. D., y González, J. E. L., & DeBruyn, J. M. (2021) · Journal of Polymers and the Environment · doi:10.1007/s10924-021-02088-4 · Cited by 89
Self-citationBiodegradable Nonwoven Agrotextile and Films—A Review
Kopitar, D., Marasović, P., Jugov, N., & Schwarz, I. G. (2022) · Polymers · doi:10.3390/polym14112272 · Cited by 66
“The results suggest that during the first weeks of testing, microorganisms begin to utilize the more available components of the mulches as carbon sources, that is microbial activity is greater and occurs more strongly for the PLA/PHA blend [115].”
Background
Metadata
- Authors
- Dharmalingam, S., Hayes, D. G., Wadsworth, L. C., & Dunlap, R. N.
- Affiliations
- University of Tennessee at Knoxville (US)
- Corresponding author
- Hayes, Douglas G
- ORCID
- Hayes, Douglas G
- Venue
- Textile Research Journal
- Publisher
- SAGE Publications
- Published
- 2015-11-11
- Volume
- 86
- Issue
- 13
- Pages
- 1343-1355
- ISSN
- 0040-5175 (ISSN-L)
- 1746-7748
- OpenAlex
- W2466530999
- Cited by
- 29
- References
- 46
- Citations by year
- 2026: 1 · 2025: 5 · 2024: 6 · 2023: 2 · 2022: 5 · 2021: 4 · 2020: 3 · 2019: 1 · 2018: 2
- FWCI
- 0.24
- Type
- journal article
- Language
- en
- Open access
- closed
- Licence
- journals.sagepub.com/page/policies/text-and-data-mining-license (tdm)
- Locations
- Textile Research Journal (publishedVersion)
- Topics
- Physical Sciences › Materials Science › Biomaterials › biodegradable polymer synthesis and properties
- Physical Sciences › Environmental Science › Pollution › Microplastics and Plastic Pollution
- Physical Sciences › Materials Science › Polymers and Plastics › Polymer crystallization and properties
- Keywords
- biodegradable plastic mulch, polylactic acid, polyhydroxyalkanoates, melt-blown nonwovens, biodegradation, tensile strength loss, crystallinity, molecular weight, depolymerization, microbial degradation, agricultural plastic waste
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.