Effect of hydrolysis time on the morphological, physical, chemical, and thermal behavior of sugar palm nanocrystalline cellulose (Arenga pinnata (Wurmb.) Merr)
The DOI matches its Crossref record; 6 of the 6 references it cites were found in a registry or an index.
Abstract
Sugar palm nanocrystalline celluloses (SPNCCs) were isolated from sugar palm fiber (SPF). In this study, acid hydrolysis (60 wt. %) at different reaction times (30, 45, and 60 min) was carried out to investigate the optimum yield of NCC. The physical properties, degree of polymerization, chemical composition, structural analysis, crystallinity, surface area and charge, zeta potential, thermal analysis, and morphological characterization were also conducted to determine the outcome (efficiency) of the process. The results showed that a needle-like shape was observed under transmission electron microscopy (TEM) studies. TEM analysis showed optimum aspect ratios of 13.46, 14.44, and 13.13 for isolated SPNCC-I, SPNCC-II, and SPNCC-III, respectively. From thermogravimetric analysis (TGA), the degradation temperature of NCC decreased slightly from 335.15℃ to 278.50℃ as the reaction time increased. A shorter hydrolysis time tended to produce SPNCC with higher thermal stability, as proven in thermal analysis by TGA. The optimal isolation time was found to be around 45 min at 1200 rpm during hydrolysis at 45℃ with 60% sulfuric acid. Therefore, the extracted SPNCC from SPF has huge potential to be utilized in the bionanocomposite field for the production of biopackaging, biomedical products, etc.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Cellulose: Fascinating Biopolymer and Sustainable Raw Material
Klemm, D., Heublein, B., Fink, H., & Bohn, A. (2005) · Angewandte Chemie International Edition · doi:10.1002/anie.200460587 · Cited by 7,551
Composites reinforced with cellulose based fibres
Bledzki, A. (1999) · Progress in Polymer Science · doi:10.1016/s0079-6700(98)00018-5 · Cited by 4,696
JOHN, M., & THOMAS, S. (2008) · Carbohydrate Polymers · doi:10.1016/j.carbpol.2007.05.040 · Cited by 2,453
Rosa, M. F., Medeiros, E. S., Malmonge, J. A., Gregorski, K. S., Wood, D. F., Mattoso, L. H. C., Glenn, G., Orts, W. J., & Imam, S. H. (2010) · Carbohydrate Polymers · doi:10.1016/j.carbpol.2010.01.059 · Cited by 1,099 · cited 2×
“According to Rosa et al.(71) and Alemdar and Sain,(68) who worked with coconut fiber and wheat straw and soy hull, respectively, these images showed the partial removal of impurities pectin, lignin, and hemicellulose after chemical treatments, which acted as cementing components surrounding the fiber-bundles.”
BackgroundBiocomposites from wheat straw nanofibers: morphology, thermal and mechanical properties
Alemdar, A., & Sain, M. (2008) · Composites Science and Technology · doi:10.1016/j.compscitech.2007.05.044 · Cited by 661 · cited 2×
“The crystallinity degree of fibers was increased with the sharpness of diffraction peaks.(27,39,56,62) Even though the structure of the nanofiber crystals was not altered, the crystallinity index varied significantly among the nanofibers.”
BackgroundSisal cellulose whiskers reinforced polyvinyl acetate nanocomposites
Garcia de Rodriguez, N. L., Thielemans, W., & Dufresne, A. (2006) · Cellulose · doi:10.1007/s10570-005-9039-7 · Cited by 534
Cited by
Polylactic Acid (PLA) Biocomposite: Processing, Additive Manufacturing and Advanced Applications
Ilyas, R. A., Sapuan, S. M., Harussani, M. M., Hakimi, M. Y. A. Y., Haziq, M. Z. M., Atikah, M. S. N., Asyraf, M. R. M., Ishak, M. R., Razman, M. R., Nurazzi, N. M., et al. (2021) · Polymers · doi:10.3390/polym13081326 · Cited by 513
Self-citationMohd Nurazzi, N., Asyraf, M. R. M., Khalina, A., Abdullah, N., Sabaruddin, F. A., Kamarudin, S. H., Ahmad, S., Mahat, A. M., Lee, C. L., Aisyah, H. A., et al. (2021) · Polymers · doi:10.3390/polym13071047 · Cited by 478
Self-citationNurazzi, N. M., Asyraf, M. R. M., Fatimah Athiyah, S., Shazleen, S. S., Rafiqah, S. A., Harussani, M. M., Kamarudin, S. H., Razman, M. R., Rahmah, M., Zainudin, E. S., et al. (2021) · Polymers · doi:10.3390/polym13132170 · Cited by 462
Self-citationMicro- and Nanocellulose in Polymer Composite Materials: A Review
Omran, A. A. B., Mohammed, A. A. B. A., Sapuan, S. M., Ilyas, R. A., Asyraf, M. R. M., Rahimian Koloor, S. S., & Petrů, M. (2021) · Polymers · doi:10.3390/polym13020231 · Cited by 398
Self-citationA Review on Natural Fiber Reinforced Polymer Composite for Bullet Proof and Ballistic Applications
Nurazzi, N. M., Asyraf, M. R. M., Khalina, A., Abdullah, N., Aisyah, H. A., Rafiqah, S. A., Sabaruddin, F. A., Kamarudin, S. H., Norrrahim, M. N. F., Ilyas, R. A., et al. (2021) · Polymers · doi:10.3390/polym13040646 · Cited by 398
Self-citation
Metadata
- Authors
- Ilyas, R., Sapuan, S., Atikah, M., Asyraf, M., Rafiqah, S. A., Aisyah, H., Nurazzi, N. M., & Norrrahim, M.
- Venue
- Textile Research Journal
- Publisher
- SAGE Publications
- Published
- 2020-06-28
- Volume
- 91
- Issue
- 1-2
- Pages
- 152-167
- ISSN
- 0040-5175 (ISSN-L)
- 1746-7748
- OpenAlex
- W3038115250
- Cited by
- 183
- References
- 6
- FWCI
- 7.19
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.