The DOI matches its Crossref record.
A Stewart Platform- Based Manipulator: General Theory and Practical Construction
Abstract
The Stewart Platform is one example of a parallel connection robot manipulator. This paper summarizes work that has been done at Oregon State University over the past several years on this topic. The work has fallen into two general areas: theoretical consideration of the generalized Stewart Platform and practical considerations for building a working machine. Both of these areas are covered in this paper. The theoretical part of the paper discusses the following four problems: 1. Given the position and orientation of the end effector, what are the actuator coordinates? 2. Given the velocity, position, and orientation of the end effector, what are the actuator velocities? 3. Given the forces exerted on the end effector by the external world and the accelerations of the end effèc tor, what are the forces at the actuators? 4. What are the singular configurations of the manipu lator? For the Stewart Platform, the singular configu rations are positions where the end effector gains one or more degrees of freedom. After the theoretical problems have been solved, there are still a group of practical problems to be tackled when a real machine is built. How can the general configuration be sim plified to make the solution of the equations practical? Once a configuration is decided upon, what are the construction considerations for building a real machine? What is the range of motion of the end effector? What are the necessary ranges of motion of the joints? What are the implications of the singularities of the Stewart Platform and what are some practical ways of solving the problems they cause? In the process of doing this research, three machines were built and a computer simulation was written and used. The most recent machine and the computer simulation will be described in this paper.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cited by
Singularity analysis of closed-loop kinematic chains
Gosselin, C., & Angeles, J. (1990) · IEEE Transactions on Robotics and Automation · doi:10.1109/70.56660 · Cited by 1,743
The Stewart platform manipulator: a review
Dasgupta, B., & Mruthyunjaya, T. S. (2000) · Mechanism and Machine Theory · doi:10.1016/s0094-114x(99)00006-3 · Cited by 715
Singular Configurations of Parallel Manipulators and Grassmann Geometry
Merlet, J.-P. (1989) · The International Journal of Robotics Research · doi:10.1177/027836498900800504 · Cited by 561
Singular configurations of parallel manipulators and grassmann geometry
Merlet, J.-P. (1989) · Lecture Notes in Computer Science · doi:10.1007/3-540-51683-2_31 · Cited by 500
Dynamic analysis of a three-degrees-of-freedom in-parallel actuated manipulator
Lee, K.-M., & Shah, D. K. (1988) · IEEE Journal on Robotics and Automation · doi:10.1109/56.797 · Cited by 446
Metadata
- Authors
- Fichter, E. F.
- Venue
- The International Journal of Robotics Research
- Publisher
- SAGE Publications
- Published
- 1986-06
- Volume
- 5
- Issue
- 2
- Pages
- 157-182
- ISSN
- 0278-3649 (ISSN-L)
- 1741-3176
- OpenAlex
- W2064071544
- Cited by
- 790
- References
- 0
- FWCI
- 13.07
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: A Stewart Platform- Based Manipulator: General Theory and Practical Construction. https://app.cochat.ai/papers/10.1177/027836498600500216
- The paper
- Fichter, E. F. (1986). A Stewart Platform- Based Manipulator: General Theory and Practical Construction. The International Journal of Robotics Research. https://doi.org/10.1177/027836498600500216
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.