Student or educator? Sign up with your school email and get 6 months of Pro free.
Cited by 446

The DOI matches its Crossref record; 16 of the 16 references it cites were found in a registry or an index.

Dynamic analysis of a three-degrees-of-freedom in-parallel actuated manipulator

Lee, K.-M., Shah, D.K.·1988·IEEE Journal on Robotics and Automation

Abstract

The dynamic analysis of a three-degrees-of-freedom in-parallel actuated manipulator is presented. The equations of motion have been formulated in joint-space using the Lagrangian approach. The analysis provides the solution to predict the forces required to actuate the links so that the manipulator follows a predetermined trajectory. A dynamic simulation program illustrates the influence of the link dynamics on the actuating force required. An example of tracing a helical path is chosen to illustrate the dynamic simulation and to show that the Cartesian position of the moving platform may be controlled at a sacrifice of orientation freedoms. The dynamic analysis provides a basis for future theoretical research to develop the control scheme, for experimental research to estimate the inertia parameters, and for design optimization of the prototype manipulator.>

Overview

The claims and statistics of this paper haven’t been checked yet.

Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.

A few free checks a day · papers already verified open instantly · results are public

Integrity signals

Registry

Crossref · 10.1109/56.797

Cites

16 of 16 references verified0 citation errors · 0 not checkable

Statistics

Verification

Claims the paper makes

The claims and statistics of this paper haven’t been checked yet.

Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.

A few free checks a day · papers already verified open instantly · results are public

Self-check

Percentages, sums and reported differences re-computed from the paper’s own numbers.

The self-check needs the paper’s full text.

Citations

Cites

Show all 16 references

Research works printed but not linked: 10

  1. dodo, 1986, Inverse dynamics of a platform type of manipulating structure, ASME Design Engineering Technical Conf
  2. 10.1115/1.3258783 · doi:10.1115/1.3258783
  3. huang, 1985, Modeling formulation of six-DOF multiloop parallel manipulation: Part 2. Dynamic modeling and example, Proc 4Th IFTONM Symp on Linkage and CAD Design Methods
  4. huang, 1986, Dynamic force analysis of six-DOF parallel multi-loop robot manipulators, ASME Des Eng Technique Conf
  5. lee, 1986, A three degrees of freedom inparallel actuated manipulator, Proc Int Conf on Applied Control and Identification
  6. lim, 1981, Control of a Tendon Arm
  7. mccallion, 1979, The analysis of a six-degree-of-freedom work station for mechanized assembly, Proc 5th World Congr for the Theory of Machines and Mechanisms, 611
  8. 10.1109/MCS.1987.1105308 · doi:10.1109/mcs.1987.1105308
  9. vachetsevanos, 1986, On the development of a novel intelligent roboric manipulator, Proc 1986 IEEE Int Conf on Syst Man Cybern
  10. bennett, 1968, A Mechanical Wrist for a Robot Arm

Cited by

See all 446

Metadata

Authors
Lee, K.-M., & Shah, D. K.
Venue
IEEE Journal on Robotics and Automation
Published
1988-06
Volume
4
Issue
3
Pages
361-367
ISSN
0882-4967 (ISSN-L)
OpenAlex
W2129264762
Cited by
446
References
16
FWCI
4.46
Type
journal article
Language
en
Open access
closed

About these checks

Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.

Statistics and arithmetic are recomputed, not judged.

Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.

What counts as a claim ›How we measure confidence ›How we check this ›

Are you an author, or do you see a problem with this page? Request a review

How to cite

Cite CoChat for the checks on this page, and the paper for its own findings.

This page
CoChat. (2026). Citation check: Dynamic analysis of a three-degrees-of-freedom in-parallel actuated manipulator. https://app.cochat.ai/papers/10.1109/56.797
The paper
Lee, K.-M., & Shah, D. K. (1988). Dynamic analysis of a three-degrees-of-freedom in-parallel actuated manipulator. IEEE Journal on Robotics and Automation. https://doi.org/10.1109/56.797

Data sources

Bibliographic data: Semantic Scholar, OpenAlex, Crossref.

Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).

Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.