The DOI matches its Crossref record; 3 of the 3 references it cites were found in a registry or an index.
Singular Configurations of Parallel Manipulators and Grassmann Geometry
Abstract
Parallel manipulators have a specific mechanical architecture where all the links are connected both at the base and at the gripper of the robot. By changing the lengths of these links we are able to control the position 1 of the gripper. In general, for a given set of links lengths there is only one position for the gripper. However, it may be suspected that in some cases more than one solution may be found for the position of the gripper: the robot is in a singular configuration. To determine these singular configurations the classical method is to find the roots of the determinant of the jacobian matrix. In our case the jacobian matrix is complex, and it seems not to be possible to find these roots. We propose here a new method based on Grassmann line geometry. The set of lines, P 3, constitutes a linear variety of rank 6. We show that a singular configuration is obtained when the variety spanned by the lines associated to the robot links has a rank less than 6. An important feature of the varieties of this geometry is that they can be described by simple geometric rules. Thus to find the singular configurations of parallel manipulators we have to find the configuration in which the robot matches these rules. Such an analysis is performed on a special parallel manip ulator. We show that we find all the well-known singular configurations, and also some new ones.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Structural Kinematics of In-Parallel-Actuated Robot-Arms
Hunt, K. H. (1983) · Journal of Mechanisms, Transmissions, and Automation in Design · doi:10.1115/1.3258540 · Cited by 860
A Stewart Platform- Based Manipulator: General Theory and Practical Construction
Fichter, E. F. (1986) · The International Journal of Robotics Research · doi:10.1177/027836498600500216 · Cited by 790
Feasibility Study of a Platform Type of Robotic Manipulators from a Kinematic Viewpoint
Yang, D. C. H., & Lee, T. W. (1984) · Journal of Mechanisms Transmissions and Automation in Design · doi:10.1115/1.3258578 · Cited by 123
Cited by
The Stewart platform manipulator: a review
Dasgupta, B., & Mruthyunjaya, T. S. (2000) · Mechanism and Machine Theory · doi:10.1016/s0094-114x(99)00006-3 · Cited by 715
Hopkins, J. B., & Culpepper, M. L. (2010) · Precision Engineering · doi:10.1016/j.precisioneng.2009.06.008 · Cited by 264
Higher-Order Analysis of Kinematic Singularities of Lower Pair Linkages and Serial Manipulators
Müller, A. (2018) · Journal of Mechanisms and Robotics · doi:10.1115/1.4038528 · Cited by 33
Metadata
- Authors
- Merlet, J.-P.
- Venue
- The International Journal of Robotics Research
- Publisher
- SAGE Publications
- Published
- 1989-10
- Volume
- 8
- Issue
- 5
- Pages
- 45-56
- ISSN
- 0278-3649 (ISSN-L)
- 1741-3176
- OpenAlex
- W2110647104
- Cited by
- 561
- References
- 3
- FWCI
- 5.93
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: Singular Configurations of Parallel Manipulators and Grassmann Geometry. https://app.cochat.ai/papers/10.1177/027836498900800504
- The paper
- Merlet, J.-P. (1989). Singular Configurations of Parallel Manipulators and Grassmann Geometry. The International Journal of Robotics Research. https://doi.org/10.1177/027836498900800504
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.