The DOI matches its Crossref record; 6 of the 6 references it cites were found in a registry or an index.
Inertial Properties in Robotic Manipulation: An Object-Level Framework
Abstract
Consideration of dynamics is critical in the analysis, design, and control of robot systems. This article presents an extensive study of the dynamic properties of several important classes of robotic structures and proposes a number of general dynamic strategies for their coordination and control. This work is a synthesis of both previous and new results developed within the task-oriented operational space formulation. Here we in troduce a unifying framework for the analysis and control of robotic systems, beginning with an analysis of inertial prop erties based on two models that independently describe the mass and inertial characteristics associated with linear and angular motions. To visualize these properties, we propose a new geometric representation, termed the belted ellipsoid, that displays the magnitudes of the mass/inertial properties directly rather than their square roots. Our study of serial macro/mini structures is based on two models of redundant mechanisms. The first is a description of the task-level dy namics that results from projecting the system dynamics into operational space. The second is a unique dynamically con sistent relationship between end-effector forces and joint torques. It divides control torques at the joint level into two dynamically decoupled vectors: torques that correspond to forces at the end effector, and torques that affect only internal motions. The analysis of inertial properties of macro-/mini- manipulator systems reveals another important characteristic: that of reduced effective inertia. We show that the effective mass/inertia of a macro-/mini-manipulator is bounded above by the mass/inertia of the mini-manipulator alone. Because mini structures have a limited range of motion, we also pro pose a dextrous dynamic coordination strategy to allow full use of the high mechanical bandwidth of the mini-structures in extended-motion operations. Finally, a study of the dy namics of parallel, multiarm structures reveals an important additive property. The effective mass and inertia of a multi arm system at some operational point are shown to be given by the sum of the effective masses and inertias associated with the object and each arm. Using this property, the mul tiarm system can be treated as a single augmented object and controlled by the total operational forces applied by the arms. Both the augmented object construct and the dynam ically consistent force/torque relationship are extended for the analysis and control of multiarm systems involving redun dancy.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Golub, G. (2012) · doi:10.56021/9781421407944 · Cited by 34,505
Real-Time Obstacle Avoidance for Manipulators and Mobile Robots
Khatib, O. (1986) · The International Journal of Robotics Research · doi:10.1177/027836498600500106 · Cited by 7,894 · cited 3×
“Asymptotic stabilization (Khatib 1987), dextrous dynamic coordination, link collision avoidance (Khatib 1986), and control of manipulator postures can all be integrated in the vector ? i 0 , which causes no acceleration at the operational point.”
BackgroundSelf-citationKhatib, O. (1987) · IEEE Journal on Robotics and Automation · doi:10.1109/jra.1987.1087068 · Cited by 2,940
Self-citationResolved-acceleration control of mechanical manipulators
Luh, J., Walker, M., & Paul, R. (1980) · IEEE Transactions on Automatic Control · doi:10.1109/tac.1980.1102367 · Cited by 1,203
Impedance control of industrial robots
Hogan, N. (1984) · Robotics and Computer-Integrated Manufacturing · doi:10.1016/0736-5845(84)90084-x · Cited by 166
High bandwidth force regulation and inertia reduction using a macro/micro manipulator system
Sharon, A., Hogan, N., & Hardt, D. E. (2003) · Proceedings - IEEE International Conference on Robotics and Automation/Proceedings · doi:10.1109/robot.1988.12036 · Cited by 139
Cited by
Rigid Body Dynamics Algorithms
Featherstone, R. (2008) · Springer eBooks · doi:10.1007/978-1-4899-7560-7 · Cited by 1,376
Albu-Schäffer, A., Ott, C., & Hirzinger, G. (2007) · The International Journal of Robotics Research · doi:10.1177/0278364907073776 · Cited by 815
Robot Collisions: A Survey on Detection, Isolation, and Identification
Haddadin, S., De Luca, A., & Albu-Schaffer, A. (2017) · IEEE Transactions on Robotics · doi:10.1109/tro.2017.2723903 · Cited by 791
A New Actuation Approach for Human Friendly Robot Design
Zinn, M., Roth, B., Khatib, O., & Salisbury, J. K. (2004) · The International Journal of Robotics Research · doi:10.1177/0278364904042193 · Cited by 441
Self-citationSYNTHESIS OF WHOLE-BODY BEHAVIORS THROUGH HIERARCHICAL CONTROL OF BEHAVIORAL PRIMITIVES
SENTIS, L., & KHATIB, O. (2005) · International Journal of Humanoid Robotics · doi:10.1142/s0219843605000594 · Cited by 419
Self-citation
Metadata
- Authors
- Khatib, O.
- Venue
- The International Journal of Robotics Research
- Publisher
- SAGE Publications
- Published
- 1995-02
- Volume
- 14
- Issue
- 1
- Pages
- 19-36
- ISSN
- 0278-3649 (ISSN-L)
- 1741-3176
- OpenAlex
- W2066379939
- Cited by
- 542
- References
- 6
- FWCI
- 17.22
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.