The DOI matches its Crossref record; 67 of the 67 references it cites were found in a registry or an index.
A Review of Vibration-based Structural Health Monitoring with Special Emphasis on Composite Materials
Open accessAbstract
Structural health monitoring and damage detection techniques are tools of great importance in the off-shore, civil, mechanical and aeronautical engineering communities, both for safety reasons and because of the economic benefits that can result. The need to be able to detect damage in complex structures has led to the development of a vast range of techniques, of which many are based upon structural vibration analysis. In the present article, some of the latest advances in Structural Health Monitoring and Damage Detection are reviewed, with an emphasis on composite structures on the grounds that this class of materials currently has a wide range of engineering applications. FOREWORD-It should be noted that this review is not intended to be a general, all-encompassing review covering the whole range of structural health monitoring (SHM); it was planned as the starting point for a study focusing on damage detection, localization and assessment for certain kinds of structure. Thus, the line of thought behind the search and the structure of this review is a result of objectives beyond the scope of the paper itself. Nevertheless, it was considered that, once the above was understood, an updated synopsis such as this could also be useful for other researchers in the same field. ©2006 SAGE Publications.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Los Alamos National Lab., N. (. S., Doebling, S., USDOE, W., Farrar, C., Prime, M., & Shevitz, D. (1996) · doi:10.2172/249299 · Cited by 2,899 · cited 2×
“Therefore, this paper includes many citations common to Doebling et al. (1996**) or Sohn et al. (2003); these are herein identified”
BackgroundA Summary Review of Vibration-Based Damage Identification Methods
Doebling, S. W., Farrar, C. R., & Prime, M. B. (1998) · The Shock and Vibration Digest · doi:10.1177/058310249803000201 · Cited by 2,823
Modal Testing: Theory and Practice
Ewins, D. J., & Saunders, H. (1986) · Journal of Vibration and Acoustics · doi:10.1115/1.3269294 · Cited by 2,507
Damage detection from changes in curvature mode shapes
Pandey, A. K., Biswas, M., & Samman, M. M. (1991) · Journal of Sound and Vibration · doi:10.1016/0022-460x(91)90595-b · Cited by 2,077
A review of structural health monitoring literature 1996-2001
Farrar, C. R., Czarnecki, J. J., Sohn, H., & Hemez, F. (2002) · Cited by 1,798
REFERENCE-BASED STOCHASTIC SUBSPACE IDENTIFICATION FOR OUTPUT-ONLY MODAL ANALYSIS
PEETERS, B., & DE ROECK, G. (1999) · Mechanical Systems and Signal Processing · doi:10.1006/mssp.1999.1249 · Cited by 1,520
The location of defects in structures from measurements of natural frequencies
Cawley, P., & Adams, R. D. (1979) · The Journal of Strain Analysis for Engineering Design · doi:10.1243/03093247v142049 · Cited by 1,439
Theoretical and Experimental Modal Analysis
Maia, N., & Silva, J. M. M. E. (1997) · Cited by 1,303
Balakrishnan, N., Barnett, V., & Lewis, T. (1995) · Biometrics · doi:10.2307/2533352 · Cited by 1,217
Overview of Piezoelectric Impedance-Based Health Monitoring and Path Forward
Park, G., Sohn, H., Farrar, C. R., & Inman, D. J. (2003) · The Shock and Vibration Digest · doi:10.1177/05831024030356001 · Cited by 1,060
The interaction of Lamb waves with defects
Alleyne, D. N., & Cawley, P. (1992) · IEEE Transactions on Ultrasonics Ferroelectrics and Frequency Control · doi:10.1109/58.143172 · Cited by 997
Vibration–based structural damage identification
Farrar, C. R., Doebling, S. W., & Nix, D. A. (2001) · Philosophical Transactions of the Royal Society of London. Series A: Mathematical, Physical and Engineering Sciences · doi:10.1098/rsta.2000.0717 · Cited by 865
(1993) · Cited by 822
A Vibration Technique for Non-Destructively Assessing the Integrity of Structures
Adams, R. D., Cawley, P., Pye, C. J., & Stone, B. J. (1978) · Journal of Mechanical Engineering Science · doi:10.1243/jmes_jour_1978_020_016_02 · Cited by 683
DAMAGE DETECTION USING OUTLIER ANALYSIS
WORDEN, K., MANSON, G., & FIELLER, N. R. J. (2000) · Journal of Sound and Vibration · doi:10.1006/jsvi.1999.2514 · Cited by 619
DAMAGE DETECTION IN BRIDGES USING MODAL CURVATURES: APPLICATION TO A REAL DAMAGE SCENARIO
ABDEL WAHAB, M. M., & DE ROECK, G. (1999) · Journal of Sound and Vibration · doi:10.1006/jsvi.1999.2295 · Cited by 583
Damage diagnosis using time series analysis of vibration signals
Sohn, H., & Farrar, C. R. (2001) · Smart Materials and Structures · doi:10.1088/0964-1726/10/3/304 · Cited by 569
Smart sensing technology: opportunities and challenges
Spencer, B. F., Ruiz-Sandoval, M. E., & Kurata, N. (2004) · Structural Control and Health Monitoring · doi:10.1002/stc.48 · Cited by 565
Structural damage diagnosis under varying environmental conditions—Part I: A linear analysis
Yan, A.-M., Kerschen, G., De Boe, P., & Golinval, J.-C. (2005) · Mechanical Systems and Signal Processing · doi:10.1016/j.ymssp.2004.12.002 · Cited by 536
Modal Analysis for Damage Detection in Structures
Hearn, G., & Testa, R. B. (1991) · Journal of Structural Engineering · doi:10.1061/(asce)0733-9445(1991)117:10(3042 · Cited by 485
Phase I IASC-ASCE Structural Health Monitoring Benchmark Problem Using Simulated Data
Johnson, E. A., Lam, H. F., Katafygiotis, L. S., & Beck, J. L. (2004) · Journal of Engineering Mechanics · doi:10.1061/(asce)0733-9399(2004)130:1(3 · Cited by 462
DAMAGE DETECTION USING THE FREQUENCY-RESPONSE-FUNCTION CURVATURE METHOD
SAMPAIO, R. P. C., MAIA, N. M. M., & SILVA, J. M. M. (1999) · Journal of Sound and Vibration · doi:10.1006/jsvi.1999.2340 · Cited by 402
Structural Health Monitoring Using Statistical Pattern Recognition Techniques
Sohn, H., Farrar, C. R., Hunter, N. F., & Worden, K. (2001) · Journal of Dynamic Systems, Measurement, and Control · doi:10.1115/1.1410933 · Cited by 402
Field Verification of a Nondestructive Damage Localization and Severity Estimation Algorithm
Stubbs, N., Kim, J. T., & Farrar, C. R. (1995) · SPIE eBooks · Cited by 380
DAMAGE DETECTION IN STRUCTURES: FROM MODE SHAPE TO FREQUENCY RESPONSE FUNCTION METHODS
MAIA, N. M. M., SILVA, J. M. M., ALMAS, E. A. M., & SAMPAIO, R. P. C. (2003) · Mechanical Systems and Signal Processing · doi:10.1006/mssp.2002.1506 · Cited by 309
Load Vectors for Damage Localization
Bernal, D. (2002) · Journal of Engineering Mechanics · doi:10.1061/(asce)0733-9399(2002)128:1(7 · Cited by 306
Subspace-based fault detection algorithms for vibration monitoring
Basseville, M., Abdelghani, M., & Benveniste, A. (2000) · Automatica · doi:10.1016/s0005-1098(99)00093-x · Cited by 296
Dynamic characterization and damage detection in the I-40 bridge over the Rio Grande
Farrar, C. R., Baker, W. E., Bell, T. M., Cone, K. M., Darling, T. W., Duffey, T. A., Eklund, A., & Migliori, A. (1994) · doi:10.2172/10158042 · Cited by 291
Yan, A.-M., Kerschen, G., De Boe, P., & Golinval, J.-C. (2005) · Mechanical Systems and Signal Processing · doi:10.1016/j.ymssp.2004.12.003 · Cited by 290
Machinery Vibration: Measurement and Analysis
Wowk, V. (1991) · Medical Entomology and Zoology · Cited by 229
Cole, H. A. (1973) · NASA Technical Reports Server (NASA) · Cited by 223
Issues in Infrastructure Health Monitoring for Management
Aktan, A. E., Catbas, F. N., Grimmelsman, K. A., & Tsikos, C. J. (2000) · Journal of Engineering Mechanics · doi:10.1061/(asce)0733-9399(2000)126:7(711 · Cited by 216
Local damage detection using the two-dimensional gapped smoothing method
Yoon, M. K., Heider, D., Gillespie, J. W., Ratcliffe, C. P., & Crane, R. M. (2005) · Journal of Sound and Vibration · doi:10.1016/j.jsv.2003.10.058 · Cited by 187
Fox, C. H. J. (1992) · Cited by 179
West, W. M. (1986) · NASA Technical Reports Server (NASA) · Cited by 152
Vibration Technique for Locating Delamination in a Composite Beam
Ratcliffe, C. P., & Bagaria, W. J. (1998) · AIAA Journal · doi:10.2514/2.482 · Cited by 146
Determination of Reinforcement Unbonding of Composites by a Vibration Technique
Lifshitz, J. M., & Rotem, A. (1969) · Journal of Composite Materials · doi:10.1177/002199836900300305 · Cited by 137
Patil, D. P., & Maiti, S. K. (2004) · Journal of Sound and Vibration · doi:10.1016/j.jsv.2004.03.035 · Cited by 127
EFFECTS OF TESTING, ANALYSIS, DAMAGE, AND ENVIRONMENT ON MODAL PARAMETERS
ALAMPALLI, S. (2000) · Mechanical Systems and Signal Processing · doi:10.1006/mssp.1999.1271 · Cited by 127
DAMAGE ASSESSMENT USING MODE SHAPE SENSITIVITIES
Parloo, E., Guillaume, P., & Overmeire, M. V. (2003) · Mechanical Systems and Signal Processing · doi:10.1006/mssp.2001.1429 · Cited by 105
'Global Non-destructive Damage Evaluation in Solids,'
Osegueda, R. A. (2013) · DigitalCommons@UTEP (The University of Texas at El Paso) · Cited by 101
Damage Prognosis: Current Status and Future Needs
Farrar, C. R., Söhn, H., Hemez, F., et al. (2003) · Cited by 100
Vibration damping for crack detection in composite laminates
Kyriazoglou, C., Page, B. H. L., & Guild, F. J. (2004) · Composites Part A Applied Science and Manufacturing · doi:10.1016/j.compositesa.2004.01.003 · Cited by 97
An outlier analysis framework for impedance-based structural health monitoring
Park, G., Rutherford, A. C., Hoon Sohn, A., & Farrar, C. R. (2004) · Journal of Sound and Vibration · doi:10.1016/j.jsv.2004.10.013 · Cited by 93
Vanlanduit, S., Parloo, E., Cauberghe, B., Guillaume, P., & Verboven, P. (2004) · Journal of Sound and Vibration · doi:10.1016/j.jsv.2004.07.016 · Cited by 92
Identification of Linear Structures Using Discrete‐Time Filters
Şafak, E. (1991) · Journal of Structural Engineering · doi:10.1061/(asce)0733-9445(1991)117:10(3064 · Cited by 92
A hybrid piezoelectric/fiber optic diagnostic system for structural health monitoring
Qing, X., Kumar, A., Zhang, C., Gonzalez, I. F., Guo, G., & Chang, F. (2005) · Smart Materials and Structures · doi:10.1088/0964-1726/14/3/012 · Cited by 80
Distributed structural health monitoring with a smart sensor array
Johnson, T. J., Brown, R. L., Adams, D. E., & Schiefer, M. I. (2003) · Mechanical Systems and Signal Processing · doi:10.1016/s0888-3270(03)00002-5 · Cited by 79
THE USE OF ANTIRESONANCES FOR ROBUST MODEL UPDATING
D’Ambrogio, W., & Fregolent, A. (2000) · Journal of Sound and Vibration · doi:10.1006/jsvi.1999.2987 · Cited by 74
Damage identification in structures using the time-domain response
Choi, S., & Stubbs, N. (2003) · Journal of Sound and Vibration · doi:10.1016/j.jsv.2003.06.010 · Cited by 74
One year monitoring of the Z24-bridge : Environmental influences versus damage events
Peeters, B., & Roeck, G. D. (2000) · Cited by 68
Nondestructive evaluation of damage in composite structures using modal parameters
Sanders, D. R., Kim, Y. I., & Stubbs, N. (1992) · Experimental Mechanics · doi:10.1007/bf02319362 · Cited by 57
Dynamic Learning Rate Neural Network Training and Composite Structural Damage Detection
Luo, H., & Hanagud, S. (1997) · AIAA Journal · doi:10.2514/3.13701 · Cited by 50
Development of a numerical model for the damage identification on composite plate structures
dos Santos, J. V. A., Soares, C. M. M., Soares, C. A. M., & Pina, H. (2000) · Composite Structures · doi:10.1016/s0263-8223(99)00073-2 · Cited by 48
'Global Damage Detection in Solids - Experimental Verification,'
Osegueda, R. A. (2013) · DigitalCommons@UTEP (The University of Texas at El Paso) · Cited by 44
Nondestructive Detection of Internal Delamination by Vibration-based Method for Composite Plates
Yam, L. H., Wei, Z., & Li, C. (2004) · Journal of Composite Materials · doi:10.1177/0021998304045590 · Cited by 42
Damage Detection in an Offshore Structure
Brincker, R., Kirkegaard, P. H., Andersen, P., & Martinez, M. E. (1994) · Cited by 37
Damage localization in output-only systems: A flexibility based approach
Bernal, D. P., & Güneş, B. (2002) · Conference on structural dynamics · Cited by 37
NARMAX model representation and its application to damage detection for multi-layer composites
Wei, Z., Yam, L. H., & Li, C. (2004) · Composite Structures · doi:10.1016/j.compstruct.2004.03.005 · Cited by 33
Damage detection using Singular Value Decomposition
Ruotolo, R., & Surace, C. (1997) · PORTO@Iris · Cited by 27
Methods of distributed sensing for health monitoring of composite material structures
Sundaresan, M. J., Pai, P. F., Ghoshal, A., Schulz, M. J., Ferguson, F., & Chung, J. H. (2001) · Composites Part A Applied Science and Manufacturing · doi:10.1016/s1359-835x(01)00090-2 · Cited by 25
Zang, C., Friswell, M. I., & Imregun, M. (2003) · Key engineering materials · doi:10.4028/www.scientific.net/kem.245-246.141 · Cited by 16
Localizing Delamination Damages in Aircraft Panels from Modal Damping Parameters
Keye, S., Rose, M., & Sachau, D. (2001) · elib (German Aerospace Center) · Cited by 13
Applications of nonlinear system identification to structural health monitoring.
Farrar, C. R., Sohn, H., & Robertson, A. N. (2004) · OSTI OAI (U.S. Department of Energy Office of Scientific and Technical Information) · Cited by 13
Using Transmissibility Data to Assess Structural Damage
Mares, C., Ruotolo, R., & Surace, C. (1999) · Key engineering materials · doi:10.4028/www.scientific.net/kem.167-168.236 · Cited by 5
Steenackers, G., & Guillaume, P. (2004) · VUBIR (Vrije Universiteit Brussel) · Cited by 5
Flow variance method for damage identification
Liu, M., & Chelidze, D. (2005) · Proceedings of SPIE, the International Society for Optical Engineering/Proceedings of SPIE · doi:10.1117/12.599713 · Cited by 1
Cited by
A review of recent research on mechanics of multifunctional composite materials and structures
Gibson, R. F. (2010) · Composite Structures · doi:10.1016/j.compstruct.2010.05.003 · Cited by 1,141
Deraemaeker, A., Reynders, E., De Roeck, G., & Kullaa, J. (2008) · Mechanical Systems and Signal Processing · doi:10.1016/j.ymssp.2007.07.004 · Cited by 580
Monitoring historical masonry structures with operational modal analysis: Two case studies
Ramos, L. F., Marques, L., Lourenço, P. B., De Roeck, G., Campos-Costa, A., & Roque, J. (2010) · Mechanical Systems and Signal Processing · doi:10.1016/j.ymssp.2010.01.011 · Cited by 443
Martinez-Luengo, M., Kolios, A., & Wang, L. (2016) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2016.05.085 · Cited by 310
Structural Health Monitoring for Advanced Composite Structures: A Review
Güemes, A., Fernandez-Lopez, A., Pozo, A. R., & Sierra-Pérez, J. (2020) · Journal of Composites Science · doi:10.3390/jcs4010013 · Cited by 298
Metadata
- Authors
- Montalvao, D.
- Venue
- The Shock and Vibration Digest
- Publisher
- SAGE Publications
- Published
- 2006-07-01
- Volume
- 38
- Issue
- 4
- Pages
- 295-324
- ISSN
- 0583-1024 (ISSN-L)
- OpenAlex
- W2103289165
- Cited by
- 500
- References
- 67
- FWCI
- 68.11
- Type
- journal article
- Language
- en
- Open access
- green
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.