The DOI matches its Crossref record; 74 of the 74 references it cites were found in a registry or an index.
Surface treatments of plant fibers and their effects on mechanical properties of fiber-reinforced composites: A review
Abstract
The need of natural fiber-reinforced composites is increasing at very fast rate because of their ecofriendly production, decomposition, high specific strength, abundance, good physical and mechanical properties. Available literature reveals that past researchers have done a lot of work for the preparation and characterization of fiber-reinforced composites. While developing natural fiber composites, researchers encountered various problems like hydrophilic nature of natural fibers, incompatibility of natural fibers with matrix materials, thermal instability of natural fibers, and poor interfacial bonding between reinforcing phase and matrix phase. However, some of these problems can be solved to a greater extent by considering surface treatment of natural fibers before they are used in the preparation of fiber-reinforced composites. Thus, there is a need for understanding the effect of several surface treatments on the mechanical properties of fiber-reinforced composites. The aim of this paper is to put forth a comprehensive review on the effects of different surface treatments on the mechanical properties such as tensile strength, flexural strength, and impact strength and also interfacial shear strength of the fiber-reinforced composites.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
A review of recent developments in natural fibre composites and their mechanical performance
Pickering, K. L., Efendy, M. G. A., & Le, T. M. (2016) · Composites Part A: Applied Science and Manufacturing · doi:10.1016/j.compositesa.2015.08.038 · Cited by 3,479
Park, S., Baker, J. O., Himmel, M. E., Parilla, P. A., & Johnson, D. K. (2010) · Biotechnology for Biofuels · doi:10.1186/1754-6834-3-10 · Cited by 3,395
Natural fibres: Can they replace glass in fibre reinforced plastics?
Wambua, P., Ivens, J., & Verpoest, I. (2003) · Composites Science and Technology · doi:10.1016/s0266-3538(03)00096-4 · Cited by 2,676
Characterization and properties of natural fiber polymer composites: A comprehensive review
Sanjay, M. R., Madhu, P., Jawaid, M., Senthamaraikannan, P., Senthil, S., & Pradeep, S. (2018) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2017.10.101 · Cited by 1,652
An Introduction to Composite Materials
Hull, D., & Clyne, T. W. (1996) · Cambridge University Press eBooks · doi:10.1017/cbo9781139170130 · Cited by 1,450
Kalia, S., Kaith, B. S., & Kaur, I. (2009) · Polymer Engineering & Science · doi:10.1002/pen.21328 · Cited by 1,447
Kenaf fiber reinforced composites: A review
Akil, H. M., Omar, M. F., Mazuki, A. A. M., Safiee, S., Ishak, Z. A. M., & Abu Bakar, A. (2011) · Materials & Design · doi:10.1016/j.matdes.2011.04.008 · Cited by 1,274
Rong, M. Z., Zhang, M. Q., Liu, Y., Yang, G. C., & Zeng, H. M. (2001) · Composites Science and Technology · doi:10.1016/s0266-3538(01)00046-x · Cited by 1,047
Processing and characterization of natural cellulose fibers/thermoset polymer composites
Thakur, V. K., & Thakur, M. K. (2014) · Carbohydrate Polymers · doi:10.1016/j.carbpol.2014.03.039 · Cited by 990
Recent Development in Natural Fiber Reinforced Polypropylene Composites
Malkapuram, R., Kumar, V., & Negi, Y. S. (2009) · Journal of Reinforced Plastics and Composites · doi:10.1177/0731684407087759 · Cited by 813
A review of natural fibers used in biocomposites: plant, animal and regenerated cellulose fibers
Ramamoorthy, S. K., Skrifvars, M., & Persson, A. (2015) · Polymer Reviews · doi:10.1080/15583724.2014.971124 · Cited by 801
The nature of adhesion in composites of modified cellulose fibers and polypropylene
Felix, J. M., & Gatenholm, P. (1991) · Journal of Applied Polymer Science · doi:10.1002/app.1991.070420307 · Cited by 773
Joseph, K., Thomas, S., & Pavithran, C. (1996) · Polymer · doi:10.1016/0032-3861(96)00144-9 · Cited by 742
Huda, M. S., Drzal, L. T., Mohanty, A. K., & Misra, M. (2008) · Composites Science and Technology · doi:10.1016/j.compscitech.2007.06.022 · Cited by 699
ABDELMOULEH, M., BOUFI, S., BELGACEM, M., & DUFRESNE, A. (2007) · Composites Science and Technology · doi:10.1016/j.compscitech.2006.07.003 · Cited by 691
Aziz, S. H., & Ansell, M. P. (2003) · Composites Science and Technology · doi:10.1016/j.compscitech.2003.10.001 · Cited by 682
Interface and bonding mechanisms of plant fibre composites: An overview
Zhou, Y., Fan, M., & Chen, L. (2016) · Composites Part B Engineering · doi:10.1016/j.compositesb.2016.06.055 · Cited by 612
Influence of processing and chemical treatment of flax fibres on their composites
de Weyenberg, I. V., Ivens, J., Coster, A. D., Kino, B., Baetens, E., & Verpoest, I. (2003) · Composites Science and Technology · doi:10.1016/s0266-3538(03)00093-9 · Cited by 586
The influence of fibre treatment on the performance of coir-polyester composites
Rout, J., Misra, M., Tripathy, S. S., Nayak, S. K., & Mohanty, A. K. (2001) · Composites Science and Technology · doi:10.1016/s0266-3538(01)00021-5 · Cited by 569
Arbelaiz, A., Fernández, B., Ramos, J. A., Retegi, A., Llano-Ponte, R., & Mondragon, I. (2005) · Composites Science and Technology · doi:10.1016/j.compscitech.2005.01.008 · Cited by 517
Influence of chemical treatments on mechanical properties of hemp fiber reinforced composites
Sepe, R., Bollino, F., Boccarusso, L., & Caputo, F. (2018) · Composites Part B: Engineering · doi:10.1016/j.compositesb.2017.09.030 · Cited by 508
Sreekala, M. S., Kumaran, M. G., Joseph, S., Jacob, M., & Thomas, S. (2000) · Applied Composite Materials · doi:10.1023/a:1026534006291 · Cited by 489
Effect of fiber surface-treatments on the properties of poly(lactic acid)/ramie composites
Yu, T., Ren, J., Li, S., Yuan, H., & Li, Y. (2010) · Composites Part A: Applied Science and Manufacturing · doi:10.1016/j.compositesa.2009.12.006 · Cited by 485
The effects of acetylation on properties of flax fibre and its polypropylene composites
Bledzki, A. K., Mamun, A. A., Lucka-Gabor, M., & Gutowski, V. S. (2008) · Express Polymer Letters · doi:10.3144/expresspolymlett.2008.50 · Cited by 476
Nam, T. H., Ogihara, S., Tung, N. H., & Kobayashi, S. (2011) · Composites Part B: Engineering · doi:10.1016/j.compositesb.2011.04.001 · Cited by 462
Van de Weyenberg, I., Chi Truong, T., Vangrimde, B., & Verpoest, I. (2006) · Composites Part A: Applied Science and Manufacturing · doi:10.1016/j.compositesa.2005.08.016 · Cited by 459
Effects of fibre treatment on wettability and mechanical behaviour of flax/polypropylene composites
Cantero, G., Arbelaiz, A., Llano-Ponte, R., & Mondragon, I. (2003) · Composites Science and Technology · doi:10.1016/s0266-3538(03)00094-0 · Cited by 450
Polypropylene/wood flour composites: treatments and properties
Ichazo, M. N., Albano, C., González, J., Perera, R., & Candal, M. V. (2001) · Composite Structures · doi:10.1016/s0263-8223(01)00089-7 · Cited by 449
Yan, L., Chouw, N., & Yuan, X. (2012) · Journal of Reinforced Plastics and Composites · doi:10.1177/0731684412439494 · Cited by 429
Engineering Composite Materials
(1987) · Composite Structures · doi:10.1016/0263-8223(87)90073-0 · Cited by 416
Effect of alkali treatment on interfacial bonding in abaca fiber-reinforced composites
Cai, M., Takagi, H., Nakagaito, A. N., Li, Y., & Waterhouse, G. I. N. (2016) · Composites Part A Applied Science and Manufacturing · doi:10.1016/j.compositesa.2016.08.025 · Cited by 414
Goriparthi, B. K., Suman, K. N. S., & Rao, N. M. (2012) · Composites Part A Applied Science and Manufacturing · doi:10.1016/j.compositesa.2012.05.007 · Cited by 400
Chemical Composition of Natural Fibers and its Influence on their Mechanical Properties
Komuraiah, A., Kumar, N. S., & Prasad, B. D. (2014) · Mechanics of Composite Materials · doi:10.1007/s11029-014-9422-2 · Cited by 399
Mechanical property evaluation of natural fiber coir composite
Harish, S., Michael, D. P., Bensely, A., Lal, D. M., & Rajadurai, A. (2009) · Materials Characterization · doi:10.1016/j.matchar.2008.07.001 · Cited by 395
Demir, H., Atikler, U., Balköse, D., & Tıhmınlıoğlu, F. (2006) · Composites Part A: Applied Science and Manufacturing · doi:10.1016/j.compositesa.2005.05.036 · Cited by 374
Alkali treatment of coir fibres for coir-polyester composites
Prasad, S. V., Pavithran, C., & Rohatgi, P. K. (1983) · Journal of Materials Science · doi:10.1007/bf01111964 · Cited by 352
Development and effect of alkali treatment on tensile properties of curaua fiber green composites
Gomes, A., Matsuo, T., Koichi, G. O. D. A., & Junji, O. H. G. I. (2007) · Composites Part A Applied Science and Manufacturing · doi:10.1016/j.compositesa.2007.04.010 · Cited by 348
Flax fibre–polyester composites
Baiardo, M., Zini, E., & Scandola, M. (2004) · Composites Part A Applied Science and Manufacturing · doi:10.1016/j.compositesa.2004.02.004 · Cited by 347
BRAHMAKUMAR, M., PAVITHRAN, C., & PILLAI, R. (2005) · Composites Science and Technology · doi:10.1016/j.compscitech.2004.09.020 · Cited by 345
Effect of Chemical treatment on Flexure Properties of Natural Fiber-reinforced Polyester Composite
Rokbi, M., Osmani, H., Imad, A., & Benseddiq, N. (2011) · Procedia Engineering · doi:10.1016/j.proeng.2011.04.346 · Cited by 340
Shanmugam, D., & Thiruchitrambalam, M. (2013) · Materials & Design · doi:10.1016/j.matdes.2013.03.048 · Cited by 339
Liu, L., Yu, J., Cheng, L., & Qu, W. (2009) · Composites Part A Applied Science and Manufacturing · doi:10.1016/j.compositesa.2009.03.002 · Cited by 335
Asumani, O., Reid, R. G., & Paskaramoorthy, R. (2012) · Composites Part A Applied Science and Manufacturing · doi:10.1016/j.compositesa.2012.04.007 · Cited by 335
Hu, R., & Lim, J.-K. (2007) · Journal of Composite Materials · doi:10.1177/0021998306069878 · Cited by 334
Alkali treatment of jute fibers: Relationship between structure and mechanical properties
Gassan, J., & Bledzki, A. K. (1999) · Journal of Applied Polymer Science · doi:10.1002/(sici)1097-4628(19990124)71:4<623::aid-app14>3.0.co;2-k · Cited by 321
Bamboo fiber-reinforced polypropylene composites: A study of the mechanical properties
Chen, X., Guo, Q., & Mi, Y. (1998) · Journal of Applied Polymer Science · doi:10.1002/(sici)1097-4628(19980906)69:10<1891::aid-app1>3.0.co;2-9 · Cited by 317
Arrakhiz, F. Z., El Achaby, M., Malha, M., Bensalah, M. O., Fassi-Fehri, O., Bouhfid, R., Benmoussa, K., & Qaiss, A. (2013) · Materials & Design · doi:10.1016/j.matdes.2012.06.056 · Cited by 315
Mwaikambo, L. Y., & Ansell, M. P. (1999) · Die Angewandte Makromolekulare Chemie · doi:10.1002/(sici)1522-9505(19991201)272:1<108::aid-apmc108>3.0.co;2-9 · Cited by 313
HORNSBY, P. R., HINRICHSEN, E., & TARVERDI, K. (1997) · Journal of Materials Science · doi:10.1023/a:1018578322498 · Cited by 310
Hill, C. A. S., & Abdul Khalil, H. P. S. (2000) · Journal of Applied Polymer Science · doi:10.1002/1097-4628(20001128)78:9<1685::aid-app150>3.0.co;2-u · Cited by 263
Lee, B.-H., Kim, H.-J., & Yu, W.-R. (2009) · Fibers and Polymers · doi:10.1007/s12221-009-0083-z · Cited by 263
Venkateshwaran, N., Elaya Perumal, A., & Arunsundaranayagam, D. (2013) · Materials & Design · doi:10.1016/j.matdes.2012.12.001 · Cited by 250
Bozacι, E., Sever, K., Sarıkanat, M., Seki, Y., Demir, A., Özdoğan, E., & Tavman, I. H. (2012) · Composites Part B Engineering · doi:10.1016/j.compositesb.2012.09.042 · Cited by 234
Hybridized carbon and flax fiber composites for tailored performance
Flynn, J., Amiri, A., & Ulven, C. (2016) · Materials & Design · doi:10.1016/j.matdes.2016.03.164 · Cited by 218
Akhtar, M. N., Sulong, A. B., Radzi, M. K. F. M., Ismail, N. N., Raza, M. R., Muhamad, N., & Khan, M. A. (2016) · Progress in Natural Science Materials International · doi:10.1016/j.pnsc.2016.12.004 · Cited by 200
A Review of the Relationship Between Thermally-Accelerated Ageing of Paper and Hornification
Kato, K. L., & Cameron, R. E. (1999) · Cellulose · doi:10.1023/a:1009292120151 · Cited by 187
Ochi, S. (2006) · Composites Part A: Applied Science and Manufacturing · doi:10.1016/j.compositesa.2005.12.019 · Cited by 175
Mehta, G., Drzal, L. T., Mohanty, A. K., & Misra, M. (2005) · Journal of Applied Polymer Science · doi:10.1002/app.22620 · Cited by 163
Biagiotti, J., Puglia, D., Torre, L., Kenny, J. M., Arbelaiz, A., Cantero, G., Marieta, C., Llano‐Ponte, R., & Mondragòn, I. (2004) · Polymer Composites · doi:10.1002/pc.20040 · Cited by 159
Dayo, A. Q., Gao, B.-C., Wang, J., Liu, W.-B., Derradji, M., Shah, A. H., & Babar, A. A. (2017) · Composites Science and Technology · doi:10.1016/j.compscitech.2017.03.024 · Cited by 158
Chen, Y., Su, N., Zhang, K., Zhu, S., Zhu, Z., Qin, W., Yang, Y., Shi, Y., Fan, S., Wang, Z., et al. (2018) · Industrial Crops and Products · doi:10.1016/j.indcrop.2018.06.079 · Cited by 141
Bagasse Fiber-Polypropylene Based Composites
Vázquez, A., Domínguez, V. A. A., & Kenny, J. M. (1999) · Journal of Thermoplastic Composite Materials · doi:10.1177/089270579901200604 · Cited by 128
Pothan, L. A., George, J., & Thomas, S. (2002) · Composite Interfaces · doi:10.1163/156855402760194692 · Cited by 114
Isothermal crystallization and mechanical behavior of ionomer treated sisal/HDPE composites
Choudhury, A. (2008) · Materials Science and Engineering A · doi:10.1016/j.msea.2008.03.011 · Cited by 99
Ahmed, K., Vijayarangan, S., & Chhaya, R. (2006) · Journal of Reinforced Plastics and Composites · doi:10.1177/0731684406066747 · Cited by 99
Sair, S., Oushabi, A., Kammouni, A., Tanane, O., Abboud, Y., Oudrhiri Hassani, F., Laachachi, A., & El Bouari, A. (2017) · Case Studies in Thermal Engineering · doi:10.1016/j.csite.2017.10.012 · Cited by 97
Amiri, A., Ulven, C. A., & Huo, S. (2015) · Polymers · doi:10.3390/polym7101493 · Cited by 93
The effect of surface treatment on the performance of flax/biodegradable composites
Georgiopoulos, P., Christopoulos, A., Koutsoumpis, S., & Kontou, E. (2016) · Composites Part B Engineering · doi:10.1016/j.compositesb.2016.09.027 · Cited by 91
Towards a methodology for the effective surface modification of porous polymer scaffolds
Safinia, L., Datan, N., Hoehse, M., Mantalaris, A., & Bismarck, A. (2005) · Biomaterials · doi:10.1016/j.biomaterials.2005.05.078 · Cited by 90
Handbook of Engineering Biopolymers
Fakirov, S., & Bhattacharyya, D. (2007) · doi:10.3139/9783446442504 · Cited by 86
Hamid, M. R. Y., Ghani, M. H. A., & Ahmad, S. (2012) · Industrial Crops and Products · doi:10.1016/j.indcrop.2012.02.019 · Cited by 76
Pichandi, S., Rana, S., Parveen, S., & Fangueiro, R. M. E. S. (2018) · Carbohydrate Polymers · doi:10.1016/j.carbpol.2018.05.074 · Cited by 58
Effects of processing conditions on the phase morphology of PC/ABS polymer blends
Chaudhry, B., Hage, E., & Pessan, L. A. (1998) · Journal of Applied Polymer Science · doi:10.1002/(sici)1097-4628(19980228)67:9<1503::aid-app1>3.0.co;2-h · Cited by 57
Haldar, P., Modak, N., & Sutradhar, G. (2017) · Materials Today Proceedings · doi:10.1016/j.matpr.2017.02.228 · Cited by 30
Cited by
Recent advances in biodegradable polymers for sustainable applications
Samir, A., Ashour, F. H., Hakim, A. A. A., & Bassyouni, M. (2022) · npj Materials Degradation · doi:10.1038/s41529-022-00277-7 · Cited by 1,209
Sustainable Fiber‐Reinforced Composites: A Review
Maiti, S., Islam, M. R., Uddin, M. A., Afroj, S., Eichhorn, S. J., & Karim, N. (2022) · Advanced Sustainable Systems · doi:10.1002/adsu.202200258 · Cited by 493
Hemp as a potential raw material toward a sustainable world: A review
Ahmed, A. T. M. F., Islam, M. Z., Mahmud, M. S., Sarker, M. E., & Islam, M. R. (2022) · Heliyon · doi:10.1016/j.heliyon.2022.e08753 · Cited by 284
Jagadeesh, P., Puttegowda, M., Mavinkere Rangappa, S., & Siengchin, S. (2021) · Polymer Composites · doi:10.1002/pc.26312 · Cited by 281
Metadata
- Authors
- Latif, R., Wakeel, S., Zaman Khan, N., Noor Siddiquee, A., Lal Verma, S., & Akhtar Khan, Z.
- Venue
- Journal of Reinforced Plastics and Composites
- Publisher
- SAGE Publications
- Published
- 2018-10-02
- Volume
- 38
- Issue
- 1
- Pages
- 15-30
- ISSN
- 0731-6844 (ISSN-L)
- 1530-7964
- OpenAlex
- W2895033757
- Cited by
- 282
- References
- 74
- FWCI
- 8.64
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.