Optimizing the fabrication processes for manufacturing a hybrid hierarchical polyurethane–cell/hydrogel construct
The DOI matches its Crossref record; 2 of the 2 references it cites were found in a registry or an index.
Abstract
It is essential to control the overall composition and internal architecture for complex organ manufacturing. In this study, several subprocesses were optimized to produce hybrid hierarchical polyurethane–cell/hydrogel constructs with an intrinsic network of grid and branched channels using a double-nozzle low-temperature deposition rapid prototyping system. The formation quality was mainly determined by the polymer concentration and composition. However, the cell viability was mainly determined by the formation time. Cell sensitivities to the inner nozzle diameter and extrusion flux were not significantly different within the given parameter ranges. The integrity of the two material systems can be varied by the formation routes and layer thickness. Under the optimal fabrication parameters, such as formation time within 20 min and gelatin:alginate:fibrinogen ratio of 2:1:1, a high cell survival rate of 80% was attained. The design and fabrication strategies used to create such a complex heterogeneous objects directly from a computer-aided design model represent a promising route for robotic hybrid hierarchical construct implementations, which would allow easy expansion of the subprocessing capabilities and scale up manufacturing capabilities.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Uygun, B. E., Soto-Gutierrez, A., Yagi, H., Izamis, M.-L., Guzzardi, M. A., Shulman, C., Milwid, J., Kobayashi, N., Tilles, A., Berthiaume, F., et al. (2010) · Nature Medicine · doi:10.1038/nm.2170 · Cited by 1,370
The use of whole organ decellularization for the generation of a vascularized liver organoid
Baptista, P. M., Siddiqui, M. M., Lozier, G., Rodriguez, S. R., Atala, A., & Soker, S. (2011) · Hepatology · doi:10.1002/hep.24067 · Cited by 681
Cited by
Advances in Regenerative Medicine and Tissue Engineering: Innovation and Transformation of Medicine
Dzobo, K., Thomford, N. E., Senthebane, D. A., Shipanga, H., Rowe, A., Dandara, C., Pillay, M., & Motaung, K. S. C. M. (2018) · Stem Cells International · doi:10.1155/2018/2495848 · Cited by 433
Assessment methodologies for extrusion-based bioink printability
Gillispie, G., Prim, P., Copus, J., Fisher, J., Mikos, A. G., Yoo, J. J., Atala, A., & Lee, S. J. (2020) · Biofabrication · doi:10.1088/1758-5090/ab6f0d · Cited by 426
Gelatin-Based Hydrogels for Organ 3D Bioprinting
Wang, X., Ao, Q., Tian, X., Fan, J., Tong, H., Hou, W., & Bai, S. (2017) · Polymers · doi:10.3390/polym9090401 · Cited by 315
Self-citationPhysical and Chemical Factors Influencing the Printability of Hydrogel-based Extrusion Bioinks
Lee, S. C., Gillispie, G., Prim, P., & Lee, S. J. (2020) · Chemical Reviews · doi:10.1021/acs.chemrev.0c00015 · Cited by 255
Adipurnama, I., Yang, M.-C., Ciach, T., & Butruk-Raszeja, B. (2017) · Biomaterials Science · doi:10.1039/c6bm00618c · Cited by 179
Metadata
- Authors
- Wang, X., He, K., & Zhang, W.
- Venue
- Journal of Bioactive and Compatible Polymers
- Publisher
- SAGE Publications
- Published
- 2013-07
- Volume
- 28
- Issue
- 4
- Pages
- 303-319
- ISSN
- 0883-9115 (ISSN-L)
- 1530-8030
- OpenAlex
- W2057141649
- Cited by
- 44
- References
- 2
- FWCI
- 2.48
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: Optimizing the fabrication processes for manufacturing a hybrid hierarchical polyurethane–cell/hydrogel construct. https://app.cochat.ai/papers/10.1177/0883911513491359
- The paper
- Wang, X., He, K., & Zhang, W. (2013). Optimizing the fabrication processes for manufacturing a hybrid hierarchical polyurethane–cell/hydrogel construct. Journal of Bioactive and Compatible Polymers. https://doi.org/10.1177/0883911513491359
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.