Development and characterization of PLA-based green composites: A review
The DOI matches its Crossref record; 110 of the 110 references it cites were found in a registry or an index.
Abstract
With increasing environmental awareness and ecological risk, green composites have gained more and more research attention, as they have the potential to be attractive than the traditional petroleum-based composites which are toxic and nonbiodegradable. Because of their lightweight, friendly processing and acoustic insulation, green composites have been used widely ranging from aerospace sector to household applications. The end-of-life concern with many polymeric composites has also limited their application spectrum. The green composites not only replace the traditional materials such as steel and wood but also challenge certain nonbiodegradable polymer composites. The present research initiative aims at highlighting the issues and challenges in the development and characterization of poly lactic acid–based green composites. A few of these important composites and their mechanical properties (tensile, compressive, flexural, and impact strength) have been reported in this study. The focus is the identification of the possible areas for their novel applications. A study has been conducted to categorize the various types of green composites on the basis of their physical, chemical, and mechanical characteristics.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Natural fibres: Can they replace glass in fibre reinforced plastics?
Wambua, P., Ivens, J., & Verpoest, I. (2003) · Composites Science and Technology · doi:10.1016/s0266-3538(03)00096-4 · Cited by 2,676
JOHN, M., & THOMAS, S. (2008) · Carbohydrate Polymers · doi:10.1016/j.carbpol.2007.05.040 · Cited by 2,453
Natural fiber polymer composites: A review
Saheb, D. N., & Jog, J. P. (1999) · Advances in Polymer Technology · doi:10.1002/(sici)1098-2329(199924)18:4<351::aid-adv6>3.0.co;2-x · Cited by 2,429
Biodegradable Polymers for the Environment
Gross, R. A., & Kalra, B. (2002) · Science · doi:10.1126/science.297.5582.803 · Cited by 1,981
DHAKAL, H., ZHANG, Z., & RICHARDSON, M. (2007) · Composites Science and Technology · doi:10.1016/j.compscitech.2006.06.019 · Cited by 1,622
Natural-fiber-reinforced polymer composites in automotive applications
Holbery, J., & Houston, D. (2006) · JOM · doi:10.1007/s11837-006-0234-2 · Cited by 1,565
Natural fibres as reinforcement in polylactic acid (PLA) composites
Oksman, K., Skrifvars, M., & Selin, J.-F. (2003) · Composites Science and Technology · doi:10.1016/s0266-3538(03)00103-9 · Cited by 1,565
Review: Current international research into cellulosic fibres and composites
Eichhorn, S. J., Baillie, C. A., Zafeiropoulos, N., Mwaikambo, L. Y., Ansell, M. P., Dufresne, A., Entwistle, K. M., Herrera-Franco, P. J., Escamilla, G. C., Groom, L., et al. (2001) · Journal of Materials Science · doi:10.1023/a:1017512029696 · Cited by 943
Biodegradable polymers/bamboo fiber biocomposite with bio-based coupling agent
Lee, S.-H., & Wang, S. (2006) · Composites Part A: Applied Science and Manufacturing · doi:10.1016/j.compositesa.2005.04.015 · Cited by 822
Mechanical properties of kenaf fibers and kenaf/PLA composites
Ochi, S. (2008) · Mechanics of Materials · doi:10.1016/j.mechmat.2007.10.006 · Cited by 708
Huda, M. S., Drzal, L. T., Mohanty, A. K., & Misra, M. (2008) · Composites Science and Technology · doi:10.1016/j.compscitech.2007.06.022 · Cited by 699 · cited 3×
“Huda et al.94 reported the flexural and impact properties of PLA/kenaf fiber biocomposites with alkalization and silane treat- ment of fibers.”
BackgroundKenaf reinforced biodegradable composite
Nishino, T., Hirao, K., Kotera, M., Nakamae, K., & Inagaki, H. (2003) · Composites Science and Technology · doi:10.1016/s0266-3538(03)00099-x · Cited by 676
Impact and tensile properties of PLA/Cordenka and PLA/flax composites
Bax, B., & Müssig, J. (2008) · Composites Science and Technology · doi:10.1016/j.compscitech.2008.01.004 · Cited by 637
Suryanegara, L., Nakagaito, A. N., & Yano, H. (2009) · Composites Science and Technology · doi:10.1016/j.compscitech.2009.02.022 · Cited by 617
Bamboo as reinforcement in structural concrete elements
Ghavami, K. (2005) · Cement and Concrete Composites · doi:10.1016/j.cemconcomp.2004.06.002 · Cited by 609
Graupner, N., Herrmann, A. S., & Müssig, J. (2009) · Composites Part A: Applied Science and Manufacturing · doi:10.1016/j.compositesa.2009.04.003 · Cited by 608 · cited 2×
“Graupner et al.91 developed a variety of natural and man-made cellulose fiber–reinforced PLA composites and suggested different fields of application like furniture, suitcases, car parts, grinding discs, safety helmets and so on.”
BackgroundBiodegradable composites based on l-polylactide and jute fibres
Plackett, D., Løgstrup Andersen, T., Batsberg Pedersen, W., & Nielsen, L. (2003) · Composites Science and Technology · doi:10.1016/s0266-3538(03)00100-3 · Cited by 531
Cellulose nanofiber-reinforced polylactic acid
Iwatake, A., Nogi, M., & Yano, H. (2008) · Composites Science and Technology · doi:10.1016/j.compscitech.2008.03.006 · Cited by 513
HUDA, M., DRZAL, L., MOHANTY, A., & MISRA, M. (2006) · Composites Science and Technology · doi:10.1016/j.compscitech.2005.10.015 · Cited by 489
Effect of fiber surface-treatments on the properties of poly(lactic acid)/ramie composites
Yu, T., Ren, J., Li, S., Yuan, H., & Li, Y. (2010) · Composites Part A: Applied Science and Manufacturing · doi:10.1016/j.compositesa.2009.12.006 · Cited by 485
Could biopolymers reinforced by randomly scattered flax fibre be used in structural applications?
Bodros, E., Pillin, I., Montrelay, N., & Baley, C. (2007) · Composites Science and Technology · doi:10.1016/j.compscitech.2006.08.024 · Cited by 481
Bledzki, A. K., & Jaszkiewicz, A. (2010) · Composites Science and Technology · doi:10.1016/j.compscitech.2010.06.005 · Cited by 415
Mechanical properties of PLA composites with man-made cellulose and abaca fibres
Bledzki, A. K., Jaszkiewicz, A., & Scherzer, D. (2009) · Composites Part A: Applied Science and Manufacturing · doi:10.1016/j.compositesa.2009.01.002 · Cited by 400
Comparison of injection moulded, natural fibre-reinforced composites with PP and PLA as matrices
Mofokeng, J. P., Luyt, A. S., Tábi, T., & Kovács, J. (2012) · Journal of Thermoplastic Composite Materials · doi:10.1177/0892705711423291 · Cited by 391
Water absorption and enzymatic degradation of poly(lactic acid)/rice starch composites
Yew, G. H., Mohd Yusof, A. M., Mohd Ishak, Z. A., & Ishiaku, U. S. (2005) · Polymer Degradation and Stability · doi:10.1016/j.polymdegradstab.2005.04.006 · Cited by 374
Mechanical properties of pineapple leaf fibre reinforced polypropylene composites
Arib, R. M. N., Sapuan, S. M., Ahmad, M. M. H. M., Paridah, M. T., & Zaman, H. M. D. K. (2006) · Materials & Design · doi:10.1016/j.matdes.2004.11.009 · Cited by 370
Thermoplastics Reinforced with Wood Fillers: A Literature Review
BLEDZKI, A. K., REIHMANE, S., & GASSAN, J. (1998) · Polymer-Plastics Technology and Engineering · doi:10.1080/03602559808001373 · Cited by 364
Development and effect of alkali treatment on tensile properties of curaua fiber green composites
Gomes, A., Matsuo, T., Koichi, G. O. D. A., & Junji, O. H. G. I. (2007) · Composites Part A Applied Science and Manufacturing · doi:10.1016/j.compositesa.2007.04.010 · Cited by 359
On the use of plant cellulose nanowhiskers to enhance the barrier properties of polylactic acid
Sanchez-Garcia, M. D., & Lagaron, J. M. (2010) · Cellulose · doi:10.1007/s10570-010-9430-x · Cited by 334
Hu, R., & Lim, J.-K. (2007) · Journal of Composite Materials · doi:10.1177/0021998306069878 · Cited by 334
Mechanical and thermal properties of chicken feather fiber/PLA green composites
Cheng, S., Lau, K.-T., Liu, T., Zhao, Y., Lam, P.-M., & Yin, Y. (2009) · Composites Part B: Engineering · doi:10.1016/j.compositesb.2009.04.011 · Cited by 332
Yussuf, A. A., Massoumi, I., & Hassan, A. (2010) · Journal of Polymers and the Environment · doi:10.1007/s10924-010-0185-0 · Cited by 327
Influence of moisture absorption on the interfacial strength of bamboo/vinyl ester composites
Chen, H., Miao, M., & Ding, X. B. (2009) · Composites Part A Applied Science and Manufacturing · doi:10.1016/j.compositesa.2009.09.003 · Cited by 313
How to improve mechanical properties of polylactic acid with bamboo fibers
Tokoro, R., Vu, D. M., Okubo, K., Tanaka, T., Fujii, T. J., & Fujiura, T. (2007) · Journal of Materials Science · doi:10.1007/s10853-007-1994-y · Cited by 290
The production and properties of polylactide composites filled with expanded graphite
Murariu, M., Dechief, A. L., Bonnaud, L., Paint, Y., Gallos, A., Fontaine, G., Bourbigot, S., & Dubois, P. (2010) · Polymer Degradation and Stability · doi:10.1016/j.polymdegradstab.2009.12.019 · Cited by 286
Physical Modification of Natural Fibers and Thermoplastic Films for Composites — A Review
Mukhopadhyay, S., & Fangueiro, R. (2009) · Journal of Thermoplastic Composite Materials · doi:10.1177/0892705708091860 · Cited by 286
Nakagaito, A. N., Fujimura, A., Sakai, T., Hama, Y., & Yano, H. (2009) · Composites Science and Technology · doi:10.1016/j.compscitech.2009.03.004 · Cited by 280
Biodegradability of poly(butylene succinate) (PBS) composite reinforced with jute fibre
Liu, L., Yu, J., Cheng, L., & Yang, X. (2008) · Polymer Degradation and Stability · doi:10.1016/j.polymdegradstab.2008.10.013 · Cited by 276
Preparation and mechanical properties of polylactic acid composites containing hydroxyapatite fibers
Kasuga, T., Ota, Y., Nogami, M., & Abe, Y. (2000) · Biomaterials · doi:10.1016/s0142-9612(00)00091-0 · Cited by 271
Okubo, K., Fujii, T., & Thostenson, E. T. (2009) · Composites Part A: Applied Science and Manufacturing · doi:10.1016/j.compositesa.2009.01.012 · Cited by 267
Kim, J. T., & Netravali, A. N. (2010) · Composites Part A: Applied Science and Manufacturing · doi:10.1016/j.compositesa.2010.05.007 · Cited by 263
Improvement of mechanical performance of industrial hemp fibre reinforced polylactide biocomposites
Sawpan, M. A., Pickering, K. L., & Fernyhough, A. (2011) · Composites Part A: Applied Science and Manufacturing · doi:10.1016/j.compositesa.2010.12.004 · Cited by 261
Islam, M. S., Pickering, K. L., & Foreman, N. J. (2010) · Composites Part A: Applied Science and Manufacturing · doi:10.1016/j.compositesa.2010.01.006 · Cited by 260
Kim, S.-J., Moon, J.-B., Kim, G.-H., & Ha, C.-S. (2008) · Polymer Testing · doi:10.1016/j.polymertesting.2008.06.002 · Cited by 256
Effect of recycling on mechanical behaviour of biocompostable flax/poly(l-lactide) composites
Le Duigou, A., Pillin, I., Bourmaud, A., Davies, P., & Baley, C. (2008) · Composites Part A: Applied Science and Manufacturing · doi:10.1016/j.compositesa.2008.05.008 · Cited by 238
Lee, B.-H., Kim, H.-S., Lee, S., Kim, H.-J., & Dorgan, J. R. (2009) · Composites Science and Technology · doi:10.1016/j.compscitech.2009.07.015 · Cited by 237
Fabrication and mechanical properties of PLA/HA composites: A study of in vitro degradation
Russias, J., Saiz, E., Nalla, R. K., Gryn, K., Ritchie, R. O., & Tomsia, A. P. (2006) · Materials Science and Engineering: C · doi:10.1016/j.msec.2005.08.004 · Cited by 235
Properties of biocomposites based on lignocellulosic fillers
Avérous, L., & Le Digabel, F. (2006) · Carbohydrate Polymers · doi:10.1016/j.carbpol.2006.04.004 · Cited by 230
Huda, M. S., Drzal, L. T., Mohanty, A. K., & Misra, M. (2007) · Composites Part B: Engineering · doi:10.1016/j.compositesb.2006.06.010 · Cited by 229
Huda, M. S., Mohanty, A. K., Drzal, L. T., Schut, E., & Misra, M. (2005) · Journal of Materials Science · doi:10.1007/s10853-005-1998-4 · Cited by 228
Polylactide-Based Renewable Green Composites from Agricultural Residues and Their Hybrids
Nyambo, C., Mohanty, A. K., & Misra, M. (2010) · Biomacromolecules · doi:10.1021/bm1003114 · Cited by 224
Novel cellulose fibre reinforced thermoplastic materials
Ganster, J., & Fink, H. (2006) · Cellulose · doi:10.1007/s10570-005-9045-9 · Cited by 218
Mechanical properties of polypropylene composites reinforced with chemically treated abaca
Rahman, M. R., Huque, M. M., Islam, M. N., & Hasan, M. (2009) · Composites Part A: Applied Science and Manufacturing · doi:10.1016/j.compositesa.2009.01.013 · Cited by 212
Qin, L., Qiu, J., Liu, M., Ding, S., Shao, L., Lü, S., Zhang, G., Zhao, Y., & Fu, X. (2011) · Chemical Engineering Journal · doi:10.1016/j.cej.2010.11.039 · Cited by 210
Development of a bio‐based composite material from soybean oil and keratin fibers
Hong, C. K., & Wool, R. P. (2005) · Journal of Applied Polymer Science · doi:10.1002/app.21044 · Cited by 208
Graupner, N. (2008) · Journal of Materials Science · doi:10.1007/s10853-008-2762-3 · Cited by 199
Bakare, I. O., Okieimen, F. E., Pavithran, C., Abdul Khalil, H. P. S., & Brahmakumar, M. (2010) · Materials & Design · doi:10.1016/j.matdes.2010.04.013 · Cited by 196
Preparation and properties of short natural fiber reinforced poly(lactic acid) composites
YU, T., LI, Y., & REN, J. (2009) · Transactions of Nonferrous Metals Society of China · doi:10.1016/s1003-6326(10)60126-4 · Cited by 194
Biodegradation of aliphatic polyester composites reinforced by abaca fiber
Teramoto, N., Urata, K., Ozawa, K., & Shibata, M. (2004) · Polymer Degradation and Stability · doi:10.1016/j.polymdegradstab.2004.04.026 · Cited by 185
Ochi, S. (2006) · Composites Part A: Applied Science and Manufacturing · doi:10.1016/j.compositesa.2005.12.019 · Cited by 175
Tribology of natural fiber polymer composites
Chand, N., & Mohammed, F. (2008) · Woodhead Publishing Limited eBooks · doi:10.1533/9781845695057 · Cited by 174
Petinakis, E., Yu, L., Edward, G., Dean, K., Liu, H., & Scully, A. D. (2009) · Journal of Polymers and the Environment · doi:10.1007/s10924-009-0124-0 · Cited by 174
Mylsamy, K., & Rajendran, I. (2011) · Materials & Design (1980-2015) · doi:10.1016/j.matdes.2011.04.029 · Cited by 170
Melt rheological behaviour of short pineapple fibre reinforced low density polyethylene composites
George, J., Janardhan, R., Anand, J. S., Bhagawan, S. S., & Thomas, S. (1996) · Polymer · doi:10.1016/s0032-3861(96)00386-2 · Cited by 168
Lee, S.-Y., Kang, I.-A., Doh, G.-H., Yoon, H.-G., Park, B.-D., & Wu, Q. (2008) · Journal of Thermoplastic Composite Materials · doi:10.1177/0892705708089473 · Cited by 165
Green Composites: Polymer Composites and the Environment
(2005) · CRC Press eBooks · doi:10.1201/9781439823408 · Cited by 163
Ray, D., Sarkar, B. K., & Bose, N. R. (2002) · Composites Part A Applied Science and Manufacturing · doi:10.1016/s1359-835x(01)00096-3 · Cited by 162
Bourmaud, A., & Pimbert, S. (2008) · Composites Part A Applied Science and Manufacturing · doi:10.1016/j.compositesa.2008.05.023 · Cited by 156
A Review on Biodegradable Plastics
Aminabhavi, T., Balundgi, R. H., & Cassidy, P. (1990) · Polymer-Plastics Technology and Engineering · doi:10.1080/03602559008049843 · Cited by 149
Yuan, Q., Wu, D., Gotama, J., & Bateman, S. A. (2008) · Journal of Thermoplastic Composite Materials · doi:10.1177/0892705708089472 · Cited by 147
Ying-Chen, Z., Wu, H., & Qiu, Y. (2010) · Bioresource Technology · doi:10.1016/j.biortech.2010.05.007 · Cited by 144
Chen, D., Li, J., & Ren, J. (2010) · Composites Part A Applied Science and Manufacturing · doi:10.1016/j.compositesa.2010.04.007 · Cited by 144
Surface of cellulosic materials modified with functionalized polyethylene coupling agents
Li, Q., & Matuana, L. M. (2003) · Journal of Applied Polymer Science · doi:10.1002/app.11681 · Cited by 136
Romhány, G., Karger-Kocsis, J., & Czigány, T. (2003) · Macromolecular Materials and Engineering · doi:10.1002/mame.200300040 · Cited by 129
The durability of jute fibre-reinforced phenolic composites
Singh, B., Gupta, M., & Verma, A. (2000) · Composites Science and Technology · doi:10.1016/s0266-3538(99)00172-4 · Cited by 126
Influence of various chemical treatments on the interactions between hemp fibres and a lime matrix
Troëdec, M. L., Peyratout, C. S., Smith, A., & Chotard, T. J. (2009) · Journal of the European Ceramic Society · doi:10.1016/j.jeurceramsoc.2008.11.016 · Cited by 123
Vignon, M. R., Dupeyre, D., & Garcia-Jaldon, C. (1996) · Bioresource Technology · doi:10.1016/s0960-8524(96)00100-9 · Cited by 115
Wong, S., Shanks, R. A., & Hodzic, A. (2002) · Macromolecular Materials and Engineering · doi:10.1002/1439-2054(200210)287:10<647::aid-mame647>3.0.co;2-7 · Cited by 113
Renewable Resource-Based Green Polymer Composites: Analysis and Characterization
Thakur, V. K., Singha, A. S., & Mehta, I. K. (2010) · International Journal of Polymer Analysis and Characterization · doi:10.1080/10236660903582233 · Cited by 108
Aspen fiber addition improves the mechanical properties of baked cornstarch foams
Lawton, J. W., Shogren, R. L., & Tiefenbacher, K. F. (2003) · Industrial Crops and Products · doi:10.1016/s0926-6690(03)00079-7 · Cited by 108
Processing and Mechanical Properties of Natural Fiber Reinforced Thermoplastic Starch Biocomposites
Torres, F. G., Arroyo-Fernàndez, O. H., & Gómez, C. M. (2007) · Journal of Thermoplastic Composite Materials · doi:10.1177/0892705707073945 · Cited by 105
Thermoplastic biopolyester natural fiber composites
Shanks, R. A., Hodzic, A., & Wong, S. (2003) · Journal of Applied Polymer Science · doi:10.1002/app.13289 · Cited by 99
Biodegradation of a silkworm silk/PLA composite
Cheung, H., Lau, K.-T., Pow, Y.-F., Zhao, Y., & Hui, D. (2009) · Composites Part B Engineering · doi:10.1016/j.compositesb.2009.09.004 · Cited by 95
Poly(lactic acid) and Osage Orange wood fiber composites for agricultural mulch films
Finkenstadt, V. L., & Tisserat, B. H. (2009) · Industrial Crops and Products · doi:10.1016/j.indcrop.2009.11.012 · Cited by 94
Biodegradable green composites reinforced by the fiber recycling from disposable chopsticks
Shih, Y., Huang, C.-C., & Chen, P. (2009) · Materials Science and Engineering A · doi:10.1016/j.msea.2009.10.024 · Cited by 90
Biodegradable Composites from Sugar Beet Pulp and Poly(lactic acid)
Liu, Fishman, M. L., Hicks, K. B., & Liu, C. (2005) · Journal of Agricultural and Food Chemistry · doi:10.1021/jf058083w · Cited by 90
Biodegradable Polyesters Reinforced with Surface‐Modified Vegetable Fibers
Zini, E., Baiardo, M., Armelao, L., & Scandola, M. (2004) · Macromolecular Bioscience · doi:10.1002/mabi.200300120 · Cited by 88
Fabrication and characterization of S. cilliare fibre reinforced polymer composites
Singha, A. S., & Thakur, V. K. (2009) · Bulletin of Materials Science · doi:10.1007/s12034-009-0008-x · Cited by 86
Kumar, R., Yakabu, M. K., & Anandjiwala, R. D. (2010) · Composites Part A Applied Science and Manufacturing · doi:10.1016/j.compositesa.2010.07.012 · Cited by 86
Saccaharum Cilliare Fiber Reinforced Polymer Composites
Singha, A. S., & Thakur, V. K. (2008) · Journal of Chemistry · doi:10.1155/2008/941627 · Cited by 84
Mechanical, Thermal and Morphological Properties of Grewia Optiva Fiber/Polymer Matrix Composites
Singha, A. S., & Thakur, V. K. (2009) · Polymer-Plastics Technology and Engineering · doi:10.1080/03602550802634550 · Cited by 84
Kovalcik, A., Hrabalova, M., Kovalcik, R., & Wimmer, R. (2010) · Polymer Engineering and Science · doi:10.1002/pen.21799 · Cited by 83
Wheat flour thermoplastic matrix reinforced by waste cotton fibre: Agro-green-composites
Geanina, D. L., Sreekumar, P. A., Saiah, R., Leblanc, N., Terrié, C., Gattin, R., & Saiter, J. (2008) · Composites Part A Applied Science and Manufacturing · doi:10.1016/j.compositesa.2008.11.004 · Cited by 81
Chen, F., Liu, L., Cooke, P. H., Hicks, K. B., & Zhang, J. (2008) · Industrial & Engineering Chemistry Research · doi:10.1021/ie800930j · Cited by 81
Thermal Degradation of Natural Fiber-reinforced Polypropylene Composites
Tajvidi, M., & Takemura, A. (2009) · Journal of Thermoplastic Composite Materials · doi:10.1177/0892705709347063 · Cited by 79
Evaluation of Poly(lactic acid) and Sugar Beet Pulp Green Composites
Finkenstadt, V. L., Liu, L., & Willett, J. L. (2006) · Journal of Polymers and the Environment · doi:10.1007/s10924-006-0038-z · Cited by 76
Poly(lactic acid) green composites using oilseed coproducts as fillers
Finkenstadt, V. L., Liu, C., Evangelista, R. L., Liu, L., Cermak, S. C., Hojilla‐Evangelista, M. P., & Willett, J. L. (2007) · Industrial Crops and Products · doi:10.1016/j.indcrop.2007.01.003 · Cited by 74
Mechanical properties of denim fabric reinforced poly(lactic acid)
Lee, J. T., Kim, M. W., Song, Y. S., Kang, T. J., & Youn, J. R. (2010) · Fibers and Polymers · doi:10.1007/s12221-010-0060-6 · Cited by 74
Cyras, V. P., Martucci, J. F., Iannace, S., & Vázquez, A. (2002) · Journal of Thermoplastic Composite Materials · doi:10.1177/0892705702015003454 · Cited by 64
Bogren, K. M., Gamstedt, E. K., Neagu, R. C., Åkerholm, M., & LindstroÖm, M. (2006) · Journal of Thermoplastic Composite Materials · doi:10.1177/0892705706067480 · Cited by 60
Charles, L. F., Shaw, M. T., Olson, J. R., & Wei, M. (2010) · Journal of Materials Science Materials in Medicine · doi:10.1007/s10856-010-4051-3 · Cited by 54
Nonlinear behavior of PLA and lignin-based flax composites subjected to tensile loading
Rozīte, L., Vārna, J., Joffe, R., & Pupurs, A. (2011) · Journal of Thermoplastic Composite Materials · doi:10.1177/0892705711425846 · Cited by 52
Mechanical and Antibacterial Properties of Treated and Untreated Zinc Oxide filled UHMWPE Composites
Chang, B. P., Akil, H. M., Nasir, R. M., & Nurdijati, S. (2011) · Journal of Thermoplastic Composite Materials · doi:10.1177/0892705711399848 · Cited by 47
Rahman, M. R., Hasan, M., Huque, M. M., & Islam, N. (2009) · Journal of Thermoplastic Composite Materials · doi:10.1177/0892705709100664 · Cited by 28
Plackett, D., & Vázquez, A. (2004) · Elsevier eBooks · doi:10.1016/b978-1-85573-739-6.50010-5 · Cited by 27
Li, S., Wang, C., Zhuang, X., Hu, Y. M., & Chu, F. (2010) · Journal of Polymers and the Environment · doi:10.1007/s10924-010-0280-2 · Cited by 25
Cunha, A. M., Liu, Z. Q., Feng, Y., Yi, X., & Bernardo, C. A. (2001) · Journal of Materials Science · doi:10.1023/a:1011836220064 · Cited by 24
Physical and Mechanical Properties of Rapeseed Waste-filled LLDPE Composites
Zabihzadeh, S. M., Omidvar, A., Marandi, M. A. B., Mirmehdi, S. M., & Dastoorian, F. (2010) · Journal of Thermoplastic Composite Materials · doi:10.1177/0892705710388591 · Cited by 16
Polylactide-Based Biocomposites
Plackett, D., & Södergård, A. (2005) · CRC Press eBooks · doi:10.1201/9780203508206.ch17 · Cited by 14
Febrianto, F., Yoshioka, M., ., Y. N., Tahir, P. M., Syafii, W., & Shiraishi, N. (2006) · Journal of Biological Sciences · doi:10.3923/jbs.2006.555.563 · Cited by 9
Cited by
Polylactic acid blends: The future of green, light and tough
Hamad, K., Kaseem, M., Ayyoob, M., Joo, J., & Deri, F. (2018) · Progress in Polymer Science · doi:10.1016/j.progpolymsci.2018.07.001 · Cited by 640
Rajeshkumar, G., Arvindh Seshadri, S., Devnani, G. L., Sanjay, M. R., Siengchin, S., Prakash Maran, J., Al-Dhabi, N. A., Karuppiah, P., Mariadhas, V. A., Sivarajasekar, N., et al. (2021) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2021.127483 · Cited by 640
Natural fiber reinforced polylactic acid composites: A review
Siakeng, R., Jawaid, M., Ariffin, H., Sapuan, S. M., Asim, M., & Saba, N. (2019) · Polymer Composites · doi:10.1002/pc.24747 · Cited by 524
Ilyas, R., Zuhri, M., Aisyah, H., Asyraf, M., Hassan, S., Zainudin, E., Sapuan, S., Sharma, S., Bangar, S., Jumaidin, R., et al. (2022) · Polymers · doi:10.3390/polym14010202 · Cited by 369
Kumar, R., Ul Haq, M. I., Raina, A., & Anand, A. (2019) · International Journal of Sustainable Engineering · doi:10.1080/19397038.2018.1538267 · Cited by 354
Metadata
- Authors
- Bajpai, P. K., Singh, I., & Madaan, J.
- Venue
- Journal of Thermoplastic Composite Materials
- Publisher
- SAGE Publications
- Published
- 2012-03-22
- Volume
- 27
- Issue
- 1
- Pages
- 52-81
- ISSN
- 0892-7057 (ISSN-L)
- 1530-7980
- OpenAlex
- W2145326783
- Cited by
- 363
- References
- 110
- FWCI
- 7.79
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.