Development of nanocellulose-reinforced PLA nanocomposite by using maleated PLA (PLA-g-MA)
The DOI matches its Crossref record; 7 of the 7 references it cites were found in a registry or an index.
Abstract
The goal of this research was improving the mechanical and physical properties of poly lactic acid (PLA) using cellulose nanofiber (CNF) as reinforcing and maleated PLA (PLA-g-MA) as a compatibilizer. PLA/nanocellulose composites were prepared through melt mixing with maleated PLA (5 wt%) and two levels of cellulose nanofibers (CNFs) (3 and 5 wt%) using twin screw extrusion. Nanocomposites fracture morphology, thermal properties, crystallization behavior, and mechanical behavior were determined as a function of cellulose nanofibers and PLA grafted on maleic anhydride content using scanning electron microscopy (SEM), atomic force microscopy, heat distortion temperature (HDT), impact, and tensile testing. The SEM micrographs confirmed the uniform dispersion of CNF within PLA matrix in the presence of maleated PLA. Among nanocellulose and compatibilizer, the latter one has better role in enhancement of nanocomposites HDT. Compatibilized nanocomposites (PLA/CNF5/PLAgMA5) exhibited maximum impact strength which was 131% higher than that of neat PLA. Compared to pure PLA, 138 and 40% improvements for the tensile strength and Young’s modulus can be obtained for the resulting nanocomposite with PLA/CNF5/PLAgMA5, respectively.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Poly‐Lactic Acid: Production, Applications, Nanocomposites, and Release Studies
Jamshidian, M., Tehrany, E. A., Imran, M., Jacquot, M., & Desobry, S. (2010) · Comprehensive Reviews in Food Science and Food Safety · doi:10.1111/j.1541-4337.2010.00126.x · Cited by 1,557
Cellulosic Bionanocomposites: A Review of Preparation, Properties and Applications
Siqueira, G., Bras, J., & Dufresne, A. (2010) · Polymers · doi:10.3390/polym2040728 · Cited by 1,328 · cited 1×
“So, due to the low interfacial compatibility between polymer and filler, the main problem is represented by the poor dispersion of nanofibers in the polymeric matrix, which may result in lower final properties.(6,18,19) For this reason, researcher used some methods including nanocellulose surface modification or used…”
MethodPotential perspectives of bio-nanocomposites for food packaging applications
Sorrentino, A., Gorrasi, G., & Vittoria, V. (2007) · Trends in Food Science & Technology · doi:10.1016/j.tifs.2006.09.004 · Cited by 1,112
Nano-biocomposites: Biodegradable polyester/nanoclay systems
BORDES, P., POLLET, E., & AVEROUS, L. (2009) · Progress in Polymer Science · doi:10.1016/j.progpolymsci.2008.10.002 · Cited by 1,033
Manufacturing process of cellulose whiskers/polylactic acid nanocomposites
Oksman, K., Mathew, A. P., Bondeson, D., & Kvien, I. (2006) · Composites Science and Technology · doi:10.1016/j.compscitech.2006.03.002 · Cited by 783 · cited 1×
“The melt compounding of cellulose nanocomposites presents several challenges.(6,14,16) The major difficulties are to feed the nanocellulose into the extruder and achieve uniform dispersion in the polymer’s matrix.”
BackgroundMechanical properties of PLA composites with man-made cellulose and abaca fibres
Bledzki, A. K., Jaszkiewicz, A., & Scherzer, D. (2009) · Composites Part A: Applied Science and Manufacturing · doi:10.1016/j.compositesa.2009.01.002 · Cited by 400 · cited 1×
“Because of good adhesion, CNFs are able to transfer stress better.(23,42) Based on other research, adding a compatibilizer to the composite further improved the impact strength.”
BackgroundPracella, M., Haque, M. M.-U., & Puglia, D. (2014) · Polymer · doi:10.1016/j.polymer.2014.06.071 · Cited by 193 · cited 2×
“For this reason, researcher used some methods including nanocellulose surface modification or used compatibilizer to improve interfacial adhesion between polymeric and reinforcing phase.(1,20) Certain studies have reported on how to make the functional groups of PLA compatible with cellulose; one way is to graft malei…”
BackgroundMethod
Cited by
Micro- and Nanocellulose in Polymer Composite Materials: A Review
Omran, A. A. B., Mohammed, A. A. B. A., Sapuan, S. M., Ilyas, R. A., Asyraf, M. R. M., Rahimian Koloor, S. S., & Petrů, M. (2021) · Polymers · doi:10.3390/polym13020231 · Cited by 398
PLA based biocomposites for sustainable products: A review
Trivedi, A. K., Gupta, M. K., & Singh, H. (2023) · Advanced Industrial and Engineering Polymer Research · doi:10.1016/j.aiepr.2023.02.002 · Cited by 337
Bikiaris, N. D., Koumentakou, I., Samiotaki, C., Meimaroglou, D., Varytimidou, D., Karatza, A., Kalantzis, Z., Roussou, M., Bikiaris, R. D., & Papageorgiou, G. Z. (2023) · Polymers · doi:10.3390/polym15051196 · Cited by 279
Khalid, M. Y., Al Rashid, A., Arif, Z. U., Ahmed, W., & Arshad, H. (2021) · Journal of Materials Research and Technology · doi:10.1016/j.jmrt.2021.07.128 · Cited by 260
Zhao, X., Liu, J., Li, J., Liang, X., Zhou, W., & Peng, S. (2022) · International Journal of Biological Macromolecules · doi:10.1016/j.ijbiomac.2022.07.091 · Cited by 249
Metadata
- Authors
- Ghasemi, S., Behrooz, R., Ghasemi, I., Yassar, R. S., & Long, F.
- Venue
- Journal of Thermoplastic Composite Materials
- Publisher
- SAGE Publications
- Published
- 2017-10-23
- Volume
- 31
- Issue
- 8
- Pages
- 1090-1101
- ISSN
- 0892-7057 (ISSN-L)
- 1530-7980
- OpenAlex
- W2765384743
- Cited by
- 118
- References
- 7
- FWCI
- 1.08
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: Development of nanocellulose-reinforced PLA nanocomposite by using maleated PLA (PLA-g-MA). https://app.cochat.ai/papers/10.1177/0892705717734600
- The paper
- Ghasemi, S., Behrooz, R., Ghasemi, I., Yassar, R. S., & Long, F. (2018). Development of nanocellulose-reinforced PLA nanocomposite by using maleated PLA (PLA-g-MA). Journal of Thermoplastic Composite Materials. https://doi.org/10.1177/0892705717734600
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.