Development of energy consumption map for orthogonal machining of Al 6061-T6 alloy
The DOI matches its Crossref record.
Abstract
The major source of environment and economic impact of machine tools has been attributed to their energy consumption. This article, therefore, proposes a novel energy mapping approach to evaluate specific cutting energy consumption with respect to cutting parameters. Unlike the studies presented earlier, which are machine-tool-specific, this study focuses on the basic tool–workpiece interaction for energy consumption analysis. The presented energy map reveals different energy consumption regions at varying machining parameters (feed and speed) during orthogonal machining of Al 6061-T6 alloy. The chip formation analysis indicates a strong correlation with the different energy consumption regions identified on the energy map. It has been observed that feed is the major contributing factor towards shear plane angle during chip formation as compared to cutting speed. Therefore, increasing feed results in a higher shear angle and consequently lowering the specific cutting energy as indicated on the energy map. Selection of machining parameters corresponding to the lowest specific cutting energy consumption region, as identified on the energy map, can result in energy savings up to 27% per kg of material removed. The developed map can be used for selection of suitable energy-efficient cutting parameters.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cited by
Younas, M., Jaffery, S. H. I., Khan, A., & Khan, M. (2021) · Journal of Manufacturing Processes · doi:10.1016/j.jmapro.2020.12.060 · Cited by 78
“A similar approach was also used by researchers for developing the energy map during machining aluminum (Al 6061T6) alloys [3, 31, 50, 51].”
BackgroundMethodSelf-citationTool Wear Progression and its Effect on Energy Consumption in Turning of Titanium Alloy (Ti-6Al-4V)
Younas, M., Jaffery, S. H. I., Khan, M., Ahmad, R., Ali, L., Khan, Z., & Khan, A. (2019) · Mechanical Sciences · doi:10.5194/ms-10-373-2019 · Cited by 37
Self-citationInvestigation of tool wear and energy consumption in machining Ti6Al4V alloy with uncoated tools
Younas, M., Khan, M., Jaffery, S. H. I., Khan, Z., & Khan, N. (2024) · The International Journal of Advanced Manufacturing Technology · doi:10.1007/s00170-024-13548-1 · Cited by 17
Self-citationEnergy Consumption Analysis in Turning Ti-6Al-4V alloy
Imran Jaffery, S. H., Younas, M., Khan, M., & Ali, L. (2020) · 2020 IEEE 11th International Conference on Mechanical and Intelligent Manufacturing Technologies (ICMIMT) · doi:10.1109/icmimt49010.2020.9041194 · Cited by 9
Self-citationHassan, A., Khan, M. A., Younas, M., Jaffery, S. H. I., Khan, M., Ahmed, N., & Awang, M. (2024) · International Journal of Automotive and Mechanical Engineering · doi:10.15282/ijame.21.2.2024.11.0874 · Cited by 4
Self-citation
Metadata
- Authors
- Warsi, S. S., Jaffery, S. H. I., Ahmad, R., Khan, M., Ali, L., Agha, M. H., & Akram, S.
- Venue
- Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture
- Publisher
- SAGE Publications
- Published
- 2017-04-19
- Volume
- 232
- Issue
- 14
- Pages
- 2510-2522
- ISSN
- 0954-4054 (ISSN-L)
- 2041-2975
- OpenAlex
- W2606480645
- Cited by
- 54
- References
- 0
- FWCI
- 3.59
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: Development of energy consumption map for orthogonal machining of Al 6061-T6 alloy. https://app.cochat.ai/papers/10.1177/0954405417703424
- The paper
- Warsi, S. S., Jaffery, S. H. I., Ahmad, R., Khan, M., Ali, L., Agha, M. H., & Akram, S. (2018). Development of energy consumption map for orthogonal machining of Al 6061-T6 alloy. Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture. https://doi.org/10.1177/0954405417703424
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.