PDMS Compound Adsorption in Context
Open accessThe DOI matches its Crossref record; 2 of the 2 references it cites were found in a registry or an index.
Abstract
Soft lithography of polydimethylsiloxane (PDMS), an elastomeric polymer, has enabled rapid and inexpensive fabrication of microfluidic devices for various biotechnology applications. However, concerns remain about adsorption of compounds on PDMS surfaces because of its porosity and hydrophobicity. Here, the adsorption of 2 small fluorescent dyes of different hydrophobicity (calcein and 5- (and 6-)carboxytetramethylrhodamine (TMR)) on PDMS surface has been systematically characterized, and PDMS adsorption has been compared with 2 traditional substrates: glass and polystyrene. To characterize adsorption in a regimen that is more relevant to microfluidic applications, the adsorption and desorption of the 2 compounds in PDMS microfluidic channels under flow conditions were also studied. Results showed that there was minimal adsorption of the hydrophilic compound calcein on PDMS, whereas the more hydrophobic TMR adsorbed on PDMS up to 4 times of that on glass or polystyrene. Under flow conditions, the desorption profiles and times needed to drop desorbed compound concentrations to negligible levels (desorption time constant, 10-42 s) were characterized. In the worst case scenario, after a 4-min exposure to TMR, 4 min of continuous wash resulted in compound concentrations in the microchannels to drop to values below 2 x 10(- 5) of the initial concentration.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Solvent Compatibility of Poly(dimethylsiloxane)-Based Microfluidic Devices
Lee, J. N., Park, C., & Whitesides, G. M. (2003) · Analytical Chemistry · doi:10.1021/ac0346712 · Cited by 2,643
Fowler, S. D., & Greenspan, P. (1985) · Journal of Histochemistry & Cytochemistry · doi:10.1177/33.8.4020099 · Cited by 440
Cited by
Gomez-Sjoberg, R., Leyrat, A. A., Houseman, B. T., Shokat, K., & Quake, S. R. (2010) · Analytical Chemistry · doi:10.1021/ac101870s · Cited by 104
Zhou, Y., Shen, J. X., & Lauschke, V. M. (2019) · Frontiers in Pharmacology · doi:10.3389/fphar.2019.01093 · Cited by 85
Injectable Therapeutic Organoids Using Sacrificial Hydrogels
Rossen, N. S., Anandakumaran, P. N., zur Nieden, R., Lo, K., Luo, W., Park, C., Huyan, C., Fu, Q., Song, Z., Singh-Moon, R. P., et al. (2020) · iScience · doi:10.1016/j.isci.2020.101052 · Cited by 36
Metadata
- Authors
- Li, N., Schwartz, M., & Ionescu-Zanetti, C.
- Venue
- SLAS Discovery
- Publisher
- Elsevier BV
- Published
- 2009-02
- Volume
- 14
- Issue
- 2
- Pages
- 194-202
- ISSN
- 2472-5552 (ISSN-L)
- OpenAlex
- W2154459221
- Cited by
- 63
- References
- 2
- FWCI
- 1.55
- Type
- journal article
- Language
- en
- Open access
- hybrid
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.