A review of processing strategies to generate melt-blown nano/microfiber mats for high-efficiency filtration applications
Open accessThe DOI matches its Crossref record; 134 of the 152 references it cites were found in a registry or an index.
Abstract
Protective masks – worn properly - have become the key to wither away the COVID-19 pandemic. Nowadays, the vast majority of these masks are made of nonwoven fabrics. High-quality products have mainly melt-blown filtering layers of nano/microfiber. Melt blowing produces very fine synthetic nonwovens from a wide range of polymers and allows a fair control of the fiber structure and morphology that makes it ideal for filtration purposes. Melt blowing has a high throughput, and the low price of the filter makes these products widely available for civil use. Although melt-blown fiber applications were rapidly growing in the last three decades, we still have limited knowledge on the processing parameters. In this regard, we detailed the melt blowing parameters to obtain a filter media with high particle capturing efficiency and a low-pressure drop. We summarized the melt-blown fiber mat characteristics with specific attention to the pore size, the porosity, the fiber diameter, the fiber packing density and the air permeability desired for highly efficient filtration. Even though we cannot estimate the future social effects and the trauma caused by the current pandemic, and protective masks might remain a part of everyday life for a long while. That also implies that near-future investments in wider manufacturing capacities seem inevitable. This paper also aims to facilitate masks' production with improved filtration efficiency by reviewing the recent developments in melt blowing, the related applications, the effects of processing parameters on the structure and performance of the nonwoven products focusing on the filtration efficiency via knowledge.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Claims other papers make about this one
Each is checked against this paper’s own text: does it say what the citing paper says it does?
The cited source says what the claim attributes to it.
In the citing paper
“This throughput is comparable to those of melt-blowing processes (27) but is orders of magnitude greater (~106) than that of 3D extrusion printing, the speed of which declines rapidly at single-micrometer features (as a power law, with a scaling factor of ~2.8) (Fig. 4, D and E, and eq. S1).”
From Recreating the heart's helical structure-function relationship with focused rotary jet spinning (2022) · cites this paper as [27]
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
null (2016) · Philosophy Study · doi:10.17265/2159-5313/2016.09.003 · Cited by 28,317
Presumed Asymptomatic Carrier Transmission of COVID-19
Bai, Y., Yao, L., Wei, T., Tian, F., Jin, D.-Y., Chen, L., & Wang, M. (2020) · JAMA · doi:10.1001/jama.2020.2565 · Cited by 4,498 · cited 1×
“In addition to these, MB nonwovens can also be utilized in a wide range of applications including drug delivery, membrane separation, battery separators, skin and wound dressing and reinforced composite materials [10–16] and they play a crucial role in the fight against the Severe acute respiratory syndrome coronaviru…”
BackgroundCOVID-19 infection: Emergence, transmission, and characteristics of human coronaviruses
Shereen, M. A., Khan, S., Kazmi, A., Bashir, N., & Siddique, R. (2020) · Journal of Advanced Research · doi:10.1016/j.jare.2020.03.005 · Cited by 3,536
What does the COVID-19 pandemic teach us about global value chains? The case of medical supplies
Gereffi, G. (2020) · Journal of International Business Policy · doi:10.1057/s42214-020-00062-w · Cited by 888 · cited 1×
“In addition to these, MB nonwovens can also be utilized in a wide range of applications including drug delivery, membrane separation, battery separators, skin and wound dressing and reinforced composite materials [10–16] and they play a crucial role in the fight against the Severe acute respiratory syndrome coronaviru…”
BackgroundMelt blown nanofibers: Fiber diameter distributions and onset of fiber breakup
Ellison, C. J., Phatak, A., Giles, D. W., Macosko, C. W., & Bates, F. S. (2007) · Polymer · doi:10.1016/j.polymer.2007.04.005 · Cited by 497 · cited 2×
“Violent vibrations can cause fiber breakage, shots and sticking [73].”
BackgroundBałazy, A., Toivola, M., Adhikari, A., Sivasubramani, S. K., Reponen, T., & Grinshpun, S. A. (2006) · American Journal of Infection Control · doi:10.1016/j.ajic.2005.08.018 · Cited by 376 · cited 1×
“Thus, at least N95, KN95, FFP2 or equivalent respirators are recommended for the protection against the airborne viruses such as the SARS-CoV-2 new coronavirus for those in high risk environments [30,37].”
BackgroundFabrication of nanofiber meltblown membranes and their filtration properties
Hassan, M. A., Yeom, B. Y., Wilkie, A., Pourdeyhimi, B., & Khan, S. A. (2013) · Journal of Membrane Science · doi:10.1016/j.memsci.2012.09.050 · Cited by 267
Fundamentals and Applications of Micro- and Nanofibers
Yarin, A. L., Pourdeyhimi, B., & Ramakrishna, S. (2014) · Cambridge University Press eBooks · doi:10.1017/cbo9781107446830 · Cited by 233
Electrospun ultrafine fibers for advanced face masks
Zhang, Z., Ji, D., He, H., & Ramakrishna, S. (2021) · Materials Science and Engineering: R: Reports · doi:10.1016/j.mser.2020.100594 · Cited by 180
Meltblown fibers: Influence of viscosity and elasticity on diameter distribution
Tan, D. H., Zhou, C., Ellison, C. J., Kumar, S., Macosko, C. W., & Bates, F. S. (2010) · Journal of Non-Newtonian Fluid Mechanics · doi:10.1016/j.jnnfm.2010.04.012 · Cited by 151 · cited 1×
“[109] reported that increasing airflow rate from �147 l/min to �272 l/min increased the CV of fiber diameter from 10% to 20% while the fiber diameter decreased around 40%.”
BackgroundZhang, H., Liu, J., Zhang, X., Huang, C., & Jin, X. (2018) · RSC Advances · doi:10.1039/c7ra10916d · Cited by 151 · cited 2×
“[141] reported that the addition of magnesium stearate (MgSt) to the PP melt improved MB fiber mats crystallinity,their electrostatic potential,as well as the filtration properties and the air permeability.”
BackgroundMethodMeltblown technology for production of polymeric microfibers/nanofibers: A review
Drábek, J., & Zatloukal, M. (2019) · Physics of Fluids · doi:10.1063/1.5116336 · Cited by 147 · cited 4×
“Tan et al.90 reported that increasing melt elasticity increased the fiber diameter and decreased the coefficient of variation (CV) (also known as normalized width of the fiber diameter distribution) while increasing viscosity did not significantly affect the CV. Drabek and Zatloukal [89] reported that polymer molecule…”
InfluentialSouzandeh, H., Wang, Y., Netravali, A. N., & Zhong, W.-H. K. (2019) · Journal of macromolecular science. Part C, Reviews in macromolecular chemistry and physics/Journal of macromolecular science. Reviews in macromolecular chemistry and physics · doi:10.1080/15583724.2019.1599391 · Cited by 146
A macroscopic view of the melt-blowing process for producing microfibers
Shambaugh, R. L. (1988) · Industrial & Engineering Chemistry Research · doi:10.1021/ie00084a021 · Cited by 143 · cited 1×
“Later on, a 36-inch-wide (914mm) die based on this concept was developed by Exxon Company [69].”
MethodMeltblown nanofiber media for enhanced quality factor
Uppal, R., Bhat, G. S., Eash, C., & Akato, K. M. (2013) · Fibers and Polymers · doi:10.1007/s12221-013-0660-z · Cited by 135 · cited 3×
“Slightly finer fibers at higher DCD can be obtained due to the deformation of hot uncrystallized fibers [105].”
BackgroundInfluentialA case study of simulating submicron aerosol filtration via lightweight spun-bonded filter media
Wang, Q., Mazé, B., Tafreshi, H. V., & Pourdeyhimi, B. (2006) · Chemical Engineering Science · doi:10.1016/j.ces.2006.03.039 · Cited by 132
Modelling pressure drop in hepa filters during dynamic filtration
Thomas, D., Contal, P., Renaudin, V., Penicot, P., Leclerc, D., & Vendel, J. (1999) · Journal of Aerosol Science · doi:10.1016/s0021-8502(98)00036-6 · Cited by 129
Superfine Thermoplastic Fibers
Wente, V. A. (1956) · Industrial & Engineering Chemistry · doi:10.1021/ie50560a034 · Cited by 108 · cited 2×
“Naval Research Laboratory by Wente with the goal of making sub-micron fibers to trap radioactive particles in the upper atmosphere [55].”
BackgroundOn-line Determination of Diameter and Temperature during Melt Blowing of Polypropylene
Bansal, V., & Shambaugh, R. L. (1998) · Industrial & Engineering Chemistry Research · doi:10.1021/ie9709042 · Cited by 106 · cited 10×
“[121] Moore EM, Papavassiliou DV and Shambaugh RL. Air velocity, air temperature, fiber vibration and fiber diameter measurements on a practical melt blowing die.”
BackgroundInfluentialDas, D., Pradhan, A. K., Chattopadhyay, R., & Singh, S. N. (2012) · Textile Progress · doi:10.1080/00405167.2012.670014 · Cited by 91 · cited 1×
“The SMS (spunbond/melt-blown/spunbond) process and variations are commonly implemented in producing filters due to their good mechanical properties and feasible production on a large-scale [50,51].”
BackgroundRecharging and rejuvenation of decontaminated N95 masks
Hossain, E., Bhadra, S., Jain, H., Das, S., Bhattacharya, A., Ghosh, S., & Levine, D. (2020) · Physics of Fluids · doi:10.1063/5.0023940 · Cited by 89
One-step melt-blowing of multi-scale micro/nano fabric membrane for advanced air-filtration
Deng, N., He, H., Yan, J., Zhao, Y., Ticha, E. B., Liu, Y., Kang, W., & Cheng, B. (2019) · Polymer · doi:10.1016/j.polymer.2019.01.035 · Cited by 87 · cited 1×
“Considering engineering and medical applications, MB fiber mats provide advantages of high filtration efficiency and low air resistance besides many other advantages [6,92,93].”
BackgroundJafari, M., Shim, E., & Joijode, A. S. (2020) · Separation and Purification Technology · doi:10.1016/j.seppur.2020.118185 · Cited by 85
Góra, A., Sahay, R., Thavasi, V., & Ramakrishna, S. (2011) · Journal of macromolecular science. Part C, Reviews in macromolecular chemistry and physics/Journal of macromolecular science. Reviews in macromolecular chemistry and physics · doi:10.1080/15583724.2011.594196 · Cited by 83
3D Printed and Electrospun, Transparent, Hierarchical Polylactic Acid Mask Nanoporous Filter
He, H., Gao, M., Illés, B., & Molnár, K. (2020) · International Journal of Bioprinting · doi:10.18063/ijb.v6i4.278 · Cited by 83 · cited 1×
“The filter media is expected to provide high efficiency for various types of conditions [39].”
BackgroundSelf-citationBalogh, A., Farkas, B., Faragó, K., Farkas, A., Wagner, I., Assche, I. V., Verreck, G., Nagy, Z. K., & Marosi, G. (2015) · Journal of Pharmaceutical Sciences · doi:10.1002/jps.24399 · Cited by 81
Electret characteristics of melt‐blown polylactic acid fabrics for air filtration application
Zhang, J., Chen, G., Bhat, G. S., Azari, H., & Pen, H. (2020) · Journal of Applied Polymer Science · doi:10.1002/app.48309 · Cited by 79
Air drag on filaments in the melt blowing process
Majumdar, B., & Shambaugh, R. L. (1990) · Journal of Rheology · doi:10.1122/1.550097 · Cited by 78 · cited 1×
“However, higher air pressure can translate air flow regime from laminar to turbulence,and further increasing air velocity could increase the CV of fiber diameter, which is unfavorable [107,108].”
BackgroundZhang, H., Liu, N., Zeng, Q., Liu, J., Zhang, X., Ge, M., Zhang, W., Li, S., Fu, Y., & Zhang, Y. (2020) · Polymers · doi:10.3390/polym12102341 · Cited by 76
Liu, C., Dai, Z., He, B., & Ke, Q. (2020) · Materials · doi:10.3390/ma13214774 · Cited by 75
Fabrication and application of poly (phenylene sulfide) ultrafine fiber
Yu, Y., Xiong, S., Huang, H., Zhao, L., Nie, K., Chen, S., Xu, J., Yin, X., Wang, H., & Wang, L. (2020) · Reactive and Functional Polymers · doi:10.1016/j.reactfunctpolym.2020.104539 · Cited by 74
Lee, S.-A., Adhikari, A., Grinshpun, S. A., McKay, R., Shukla, R., Zeigler, H. L., & Reponen, T. (2005) · Journal of Occupational and Environmental Hygiene · doi:10.1080/15459620500330583 · Cited by 73 · cited 1×
“These biologically hazardous substances or bioaerosols might be transferred through the air, and they could cause severe health effects because of their ability to incubate, grow, multiply, and produce toxic substances [136].”
BackgroundNeedleless electro-spun nanofibers used for filtration of small particles
Li, J., Gao, F., Liu, L. Q., & Zhang, Z. (2013) · eXPRESS Polymer Letters · doi:10.3144/expresspolymlett.2013.65 · Cited by 73
Removal of airborne nanoparticles by membrane coated filters
Liu, J., Pui, D. Y. H., & Wang, J. (2011) · The Science of The Total Environment · doi:10.1016/j.scitotenv.2011.08.011 · Cited by 70 · cited 1×
“often employed in mass production to create such respiratory systems with high quality and high filtration efficiency [26].”
BackgroundA Review on the Studies of Air Flow Field and Fiber Formation Process during Melt Blowing
Hao, X., & Zeng, Y. (2019) · Industrial & Engineering Chemistry Research · doi:10.1021/acs.iecr.9b01694 · Cited by 68 · cited 1×
“However, higher air pressure can translate air flow regime from laminar to turbulence,and further increasing air velocity could increase the CV of fiber diameter, which is unfavorable [107,108].”
BackgroundMulti-Layered, Corona Charged Melt Blown Nonwovens as High Performance PM0.3 Air Filters
Zhang, X., Liu, J., Zhang, H., Hou, J., Wang, Y., Deng, C., Huang, C., & Jin, X. (2021) · Polymers · doi:10.3390/polym13040485 · Cited by 68
Electrostatic Capture Efficiency Enhancement of Polypropylene Electret Filters with Barium Titanate
Kılıç, A., Shim, E., & Pourdeyhimi, B. (2015) · Aerosol Science and Technology · doi:10.1080/02786826.2015.1061649 · Cited by 67
Influence of Laval nozzles on the air flow field in melt blowing apparatus
Tan, D. H., Herman, P. K., Janakiraman, A., Bates, F. S., Kumar, S., & Macosko, C. W. (2012) · Chemical Engineering Science · doi:10.1016/j.ces.2012.06.020 · Cited by 62 · cited 1×
“[113] studied the effect of increasing inlet air pressure in the melt blowing die and the effect of a de Laval nozzle attached to the die face.”
BackgroundMelt Strength Behaviour of Polypropylenes
Ghijsels, A., & Clippeleir, J. D. (1994) · International Polymer Processing · doi:10.3139/217.940252 · Cited by 61 · cited 1×
“melt stream can be drawn into fine fibers without excessive draw force [87,88].”
Background(2009) · Journal of textile and apparel technology and management · Cited by 60
Czigány, T., & Ronkay, F. (2020) · eXPRESS Polymer Letters · doi:10.3144/expresspolymlett.2020.41 · Cited by 59 · cited 1×
“The outbreak of the coronavirus (COVID-19) pandemic revealed that respiratory protection plays a vital role in the present world and the development of ultrafine polymeric fiber mats highly efficient filters allowing filtration of a wide range of particles, viruses, and aerosol is necessary [133,134].”
BackgroundPorosity and barrier properties of polyethylene meltblown nonwovens
Yeşil, Y., & Bhat, G. S. (2016) · Journal of the Textile Institute · doi:10.1080/00405000.2016.1218109 · Cited by 58 · cited 8×
“The high barrier properties against fluids, breathability and efficient particulate and droplet filtration are essential features for the respirators made of nonwovens [5,38].”
BackgroundInfluentialElectret Media for HVAC Filtration Applications
Myers, D. L., & Arnold, B. D. (2003) · International Nonwovens Journal · doi:10.1177/1558925003os-1200412 · Cited by 55 · cited 1×
“, sanitizing with alcohol) may favor the degradation of the charge that reduces filtration performance [156].”
BackgroundPreparation and properties of poly(lactic acid) fiber melt blown non-woven disordered mats
Feng, J. (2016) · Materials Letters · doi:10.1016/j.matlet.2016.12.013 · Cited by 54 · cited 2×
“Feng [124] reported that increasing DCD decreases the PLA fiber mat web strength despite the thinner fiber produced at larger DCDs as shown in Figure 9.”
BackgroundDevelopment of Polypropylene Nanofiber Production System
Watanabe, K., Kim, B., & Kim, I. S. (2011) · Journal of macromolecular science. Part C, Reviews in macromolecular chemistry and physics/Journal of macromolecular science. Reviews in macromolecular chemistry and physics · doi:10.1080/15583724.2011.594195 · Cited by 53
Jaganathan, S., Tafreshi, H. V., & Pourdeyhimi, B. (2007) · Powder Technology · doi:10.1016/j.powtec.2007.07.002 · Cited by 52
Composite melt-blown nonwoven fabrics with large pore size as Li-ion battery separator
Wang, H., Zhang, Y., Gao, H., Jin, X., & Xie, X. (2015) · International Journal of Hydrogen Energy · doi:10.1016/j.ijhydene.2015.09.130 · Cited by 51
Lee, Y., & Wadsworth, L. C. (1992) · Polymer · doi:10.1016/0032-3861(92)90764-n · Cited by 50 · cited 9×
“[153] Gosavi N, Wadsworth LC and Duckett KE.”
BackgroundInfluentialTurbulent air flow field in slot-die melt blowing for manufacturing microfibrous nonwoven materials
Xie, S. J., Han, W., Jiang, G., & Chen, C. (2018) · Journal of Materials Science · doi:10.1007/s10853-018-2008-y · Cited by 50 · cited 4×
“[104] concluded that the air velocity attenuates the fibers in their molten state.”
BackgroundInfluentialXiao, H., Gui, J., Chen, G., & Xiao, C. (2015) · Journal of Applied Polymer Science · doi:10.1002/app.42807 · Cited by 49 · cited 1×
“) are suggested to overcome this issue and hence improve the filtration performance [146,155].”
BackgroundCOLLECTION MECHANISMS OF ELECTRET FILTER
Emi, H., Kanaoka, C., Ōtani, Y., & Ishiguro, T. (1987) · Particulate Science And Technology · doi:10.1080/02726358708904545 · Cited by 49 · cited 2×
“This is typical for particles smaller than a micron that can potentially penetrate into the respiratory system [157,158].”
BackgroundMethodStructure and mechanical properties of polyethylene melt blown nonwovens
Yeşil, Y., & Bhat, G. S. (2016) · International Journal of Clothing Science and Technology · doi:10.1108/ijcst-09-2015-0099 · Cited by 49
One-step melt blowing process for PP/PEG micro-nanofiber filters with branch networks
Zhang, H., Zhen, Q., Liu, Y., Liu, R., & Zhang, Y. (2019) · Results in Physics · doi:10.1016/j.rinp.2019.01.012 · Cited by 49
Study on melt-blown processing, web structure of polypropylene nonwovens and its BTX adsorption
Guo, M., Liang, H., Luo, Z., Chen, Q., & Wei, W. (2016) · Fibers and Polymers · doi:10.1007/s12221-016-5592-y · Cited by 47 · cited 2×
“Influence of polymer throughput rate on PP fiber mat porosity and surface area and average fiber diameter [97].”
BackgroundLi, T., Fan, Y., Cen, X., Wang, Y., Shiu, B., Ren, H., Peng, H., Jiang, Q., Lou, C., & Lin, J. (2020) · Nanomaterials · doi:10.3390/nano10102025 · Cited by 47 · cited 1×
“[142] developed a hierarchical fibrous structure made of PP MB and”
BackgroundEffect of Air Humidity on Charge Decay and Lifetime of PP Electret Nonwovens
Motyl, E. (2006) · Repozytorium Eny Politechnika Wrocławska · Cited by 46
The charging and stability of electret filters
Kılıç, A., Russell, S. J., Shim, E., & Pourdeyhimi, B. (2017) · Elsevier eBooks · doi:10.1016/b978-0-08-100573-6.00025-3 · Cited by 46 · cited 1×
“Particularly, the ionic species generated by the negative polarity through the corona-charging is proved to be an effective method to enhance filtration efficiency of MB PP fiber mats [158,159].”
MethodZhang, H., Liu, J., Zhang, X., Huang, C., Zhang, Y., Fu, Y., & Jin, X. (2019) · Journal of Applied Polymer Science · doi:10.1002/app.47827 · Cited by 46 · cited 2×
“[138] developed a PP multilayer composite filter made of needlepunched layer (NPL) and MB fiber mat layer (MBL) with a high filtration efficiency up to 99.”
BackgroundMethodPhysical and thermal characterization of polylactic acid meltblown nonwovens
Hammonds, R. L., Gazzola, W. H., & Benson, R. S. (2014) · Journal of Applied Polymer Science · doi:10.1002/app.40593 · Cited by 44 · cited 4×
“[81] studied the influence of air flow rate (i.”
BackgroundInfluentialThe formation of dry, wet, spunlaid and other types of nonwovens
Wilson, A. (2010) · Elsevier eBooks · doi:10.1533/9781845699741.1.3 · Cited by 42 · cited 1×
“After the first steps of Wente in the 50’s, today’s well-known companies like DuPont [59], Exxon [60], Kimberly-Clark [61], Johnson & Johnson [62], 3M [63] and many others [64–67] took an active part in developments and industrialization of melt blowing and MB fibers in the subsequent years [68].”
BackgroundAttenuating PP/PET bicomponent melt blown microfibers
Zhao, R., & Wadsworth, L. C. (2003) · Polymer Engineering and Science · doi:10.1002/pen.10037 · Cited by 42 · cited 2×
“Polyethylene terephthalate (PET) 5 375 315 [75,76]”
BackgroundThe combination of meltblown and electrospinning for bone tissue engineering
Erben, J., Kateřina, P., Sanetrník, F., Chvojka, J., Jenčová, V., Blažková, L., Havlíček, J., Novák, O., Mikeš, P., Prosecká, E., et al. (2014) · Materials Letters · doi:10.1016/j.matlet.2014.12.100 · Cited by 41
61—THE AIR-PERMEABILITY OF NON-WOVEN FABRICS
Kothari, V. K., & Newton, A. (1974) · Journal of the Textile Institute · doi:10.1080/00405007408630140 · Cited by 41
Effects of Processing Parameters on the Fiber Diameter of Melt Blown Nonwoven Fabrics
Chen, T., Wang, X., & Huang, X. (2005) · Textile Research Journal · doi:10.1177/004051750507500114 · Cited by 40 · cited 2×
“In the literature, it is suggested that the suitable range of MFI for polymers used in melt blowing is 15–3,000 g/10min [4,55,86,87] as a rule of a thumb.”
BackgroundZhang, D., Sun, C., Beard, J., Brown, H., Carson, I. G., & Hwo, C. (2001) · Journal of Applied Polymer Science · doi:10.1002/app.2295 · Cited by 36 · cited 1×
“Polyethylene terephthalate (PET) 5 375 315 [75,76]”
Mao, N. (2017) · Elsevier eBooks · doi:10.1016/b978-0-08-100573-6.00005-8 · Cited by 36
Application of Melt-Blown Poly(lactic acid) Fibres in Self-Reinforced Composites
Vadas, D., Kmetykó, D., Marosi, G., & Bocz, K. (2018) · Polymers · doi:10.3390/polym10070766 · Cited by 36
Mao, N. (2016) · Elsevier eBooks · doi:10.1016/b978-0-08-100575-0.00010-3 · Cited by 36
Strength properties of melt blown nonwoven webs
Choi, K.-M., Spruiell, J. E., Fellers, J. F., & Wadsworth, L. C. (1988) · Polymer Engineering and Science · doi:10.1002/pen.760280204 · Cited by 35 · cited 2×
“[110] found that the stiffness of the different grade hPP (MFI1⁄4 300-35-12.”
BackgroundDrábek, J., Zatloukal, M., & Martyn, M. (2017) · Journal of Non-Newtonian Fluid Mechanics · doi:10.1016/j.jnnfm.2017.11.009 · Cited by 35 · cited 1×
“[118] reported that an hour of residence time at the processing temperature (combined with medium high shear rate level) resulted in nearly 40% decrease in the PP resin’s (MFI1⁄4 1200 g/10min at 230 �C, 2.”
BackgroundParticle Filtration with an Electret of Nonwoven Polypropylene Fabric
Yang, Z., Lin, J., Tsai, I. S., & Kuo, T.-Y. (2002) · Textile Research Journal · doi:10.1177/004051750207201210 · Cited by 33 · cited 1×
“[160] studied influence of corona discharge treatments on MB PP electret filters.”
BackgroundModeling of the Melt Blowing Performance of Slot Dies
Marla, V. T., & Shambaugh, R. L. (2004) · Industrial & Engineering Chemistry Research · doi:10.1021/ie030767a · Cited by 33 · cited 4×
“On the other hand, Marla and Shambaugh [98] reported that the further increase in polymer temperature would result only in a slight decrease in the fiber diameter.”
BackgroundInfluentialThe Air-permeability of Non-woven Fabrics
Dent, R. W. (1976) · Journal of the Textile Institute · doi:10.1080/00405007608630571 · Cited by 33 · cited 1×
“It is defined as the rate of airflow passing perpendicularly through a known area of the filter under a certain pressure difference between the two sides of the filter [52].”
BackgroundStudy on structure and property of PP/TPU melt-blown nonwovens
Peng, M., Jia, H., Jiang, L., Zhou, Y., & Ma, J. (2018) · Journal of the Textile Institute · doi:10.1080/00405000.2018.1485461 · Cited by 33
Zhu, X., Dai, Z., Xu, K., Zhao, Y. Y., & Ke, Q. (2019) · Macromolecular Materials and Engineering · doi:10.1002/mame.201900350 · Cited by 32 · cited 3×
“Mechanism schematic of simultaneous effect of composite nonwoven filter media for air pollutant removal and photocatalytic degradation of volatile organic compounds [51].”
BackgroundExperimental investigation of adhesive meltblown web production using accessory air
Wang, X., & Ke, Q. (2005) · Polymer Engineering and Science · doi:10.1002/pen.20352 · Cited by 30 · cited 1×
“defect formation, larger pores and larger basis weight), which is unfavorable [95,96].”
BackgroundThermo-mechanical behavior and structure of melt blown shape-memory polyurethane nonwovens
Safranski, D. L., Boothby, J. M., Kelly, C. N., Beatty, K., Lakhera, N., Frick, C. P., Lin, A., Guldberg, R. E., & Griffis, J. C. (2016) · Journal of the mechanical behavior of biomedical materials/Journal of mechanical behavior of biomedical materials · doi:10.1016/j.jmbbm.2016.05.038 · Cited by 30
Shear‐aided high‐throughput electrospinning: A needleless method with enhanced jet formation
Kara, Y., He, H., & Molnár, K. (2020) · Journal of Applied Polymer Science · doi:10.1002/app.49104 · Cited by 30
Self-citationMoore, E. M., Papavassiliou, D. V., & Shambaugh, R. L. (2004) · International Nonwovens Journal · doi:10.1177/1558925004os-1300309 · Cited by 28 · cited 1×
“[121] reported that the temperature of the melt blowing die (and therefore the melt) plays a crucial role in the fiber attenuation and affects the fiber diameters and pore sizes significantly.”
BackgroundXiao, Y., Sakib, N., Yue, Z., Wang, Y., Cheng, S. C., You, J., Militký, J., Venkataraman, M., & Zhu, G. (2019) · Autex Research Journal · doi:10.2478/aut-2019-0029 · Cited by 28
Separation of Nanoparticles from Air Using Melt-Blown Filtering Media
Jackiewicz, A., & Werner, Ł. (2015) · Aerosol and Air Quality Research · doi:10.4209/aaqr.2015.04.0236 · Cited by 27
Handbook of Respiratory Protection: Safeguarding Against Current and Emerging Hazards
Racz, L., Eninger, R. M., & Yamamoto, D. P. (2017) · CRC Press eBooks · doi:10.4324/9781351109079 · Cited by 27 · cited 2×
“Thus, at least N95, KN95, FFP2 or equivalent respirators are recommended for the protection against the airborne viruses such as the SARS-CoV-2 new coronavirus for those in high risk environments [30,37].”
BackgroundKumar, L., Horechyy, A., Bittrich, E., Nandan, B., Uhlmann, P., & Fery, A. (2019) · Polymers · doi:10.3390/polym11111882 · Cited by 27
Kara, Y., & Molnár, K. (2021) · Polymers for Advanced Technologies · doi:10.1002/pat.5270 · Cited by 27 · cited 1×
“Often a combination of multiple properties is desired, and that can be achieved with precisely engineered equipment operated within a rather narrow processing window, accurately designed processing parameters, or combination of two or more synthetic materials [24,25].”
BackgroundSelf-citationBegenir, A., Michielsen, S., & Pourdeyhimi, B. (2009) · Polymer Engineering and Science · doi:10.1002/pen.21244 · Cited by 26 · cited 1×
“However, higher DCDs may result in diminished interfiber adhesion and web strength originating from the lower fiber contact temperatures [123].”
BackgroundDesign of Web-to-Web Spacing for the Reduced Pressure Drop and Effective Depth Filtration
Roh, S.-H., Park, K., & Kim, J. (2019) · Polymers · doi:10.3390/polym11111822 · Cited by 26 · cited 3×
“Schematic overview of the study (a) Filtering media layer construction, (b) Pressure drops of different layer-constructions for face velocity of 15 cm/s, (c) computational model for the pressure drop behavior of different stack and (d) Filter media morphology of different constructions after NaCI aerosol loading [154].”
BackgroundMethodInfluentialCheng, S. C., Muhaiminul, A. S. M., Yue, Z., Wang, Y., Xiao, Y., Militký, J., Prasad, M., & Zhu, G. (2020) · Autex Research Journal · doi:10.2478/aut-2019-0067 · Cited by 26 · cited 4×
“Change in the crystallinity and filtration efficiency respect to the electret temperature [8].”
BackgroundInfluentialComposite nonwovens in filters: applications
Mukhopadhyay, A. (2014) · Composite Non-Woven Materials · doi:10.1533/9780857097750.164 · Cited by 25
Introduction to composite nonwovens
Das, D. (2014) · Elsevier eBooks · doi:10.1533/9780857097750.1 · Cited by 24
Influence of process Conditions on Melt Blown Web Structure. Part IV - Fiber Diameter
Bresee, R. R., & Qureshi, U. A. (2006) · Journal of Engineered Fibers and Fabrics · doi:10.1177/155892500600100103 · Cited by 24 · cited 5×
“Bresee and Qureshi [128] studied the effect of DCD on the diameter MB PP (MFI1⁄4 1,259g/10min @230�C, 2.”
BackgroundInfluentialA review of the melt blown process
Gahan, R. E., & Zguris, G. C. (2002) · Annual Battery Conference on Applications and Advances · doi:10.1109/bcaa.2000.838396 · Cited by 23
Drábek, J., & Zatloukal, M. (2019) · Journal of Rheology · doi:10.1122/1.5048585 · Cited by 23 · cited 4×
“Tan et al.90 reported that increasing melt elasticity increased the fiber diameter and decreased the coefficient of variation (CV) (also known as normalized width of the fiber diameter distribution) while increasing viscosity did not significantly affect the CV. Drabek and Zatloukal [89] reported that polymer molecule…”
BackgroundInfluentialComposite nonwovens in medical applications
Ghosh, S. (2014) · Elsevier eBooks · doi:10.1533/9780857097750.211 · Cited by 21
Fiber and web formation of melt‐blown thermoplastic polyurethane polymers
Lee, Y. E., & Wadsworth, L. C. (2007) · Journal of Applied Polymer Science · doi:10.1002/app.26432 · Cited by 21 · cited 2×
“Distribution of the MB TPU fiber bundle orientation at various DCDs [132].”
BackgroundResultBrochocka, A., & Majchrzycka, K. (2009) · Fibres and Textiles in Eastern Europe · Cited by 20
Empirical models for melt blowing
Milligan, M. W., & Haynes, B. D. (1995) · Journal of Applied Polymer Science · doi:10.1002/app.1995.070580117 · Cited by 19
Influence of Die Geometry on Fiber Motion and Fiber Attenuation in the Melt-Blowing Process
Xie, S. J., Zheng, Y., & Zeng, Y. (2014) · Industrial & Engineering Chemistry Research · doi:10.1021/ie5025529 · Cited by 19 · cited 2×
“The average diameter of the fibers produced at a greater DCD tends to decrease due to the more time of the attenuation as shown in Figure 8 [6,117,119,120].”
BackgroundGuo, C., Wang, Q. W., Liu, J. G., Qi, L., Huangfu, M., Wu, X., Zhang, Y., & Zhang, X. M. (2019) · eXPRESS Polymer Letters · doi:10.3144/expresspolymlett.2019.61 · Cited by 19
Li, T., Cen, X., Ren, H., Sun, F., Lin, Q., Lou, C., & Lin, J. (2019) · Polymers · doi:10.3390/polym11081307 · Cited by 19
Kopřivová, B., Lisnenko, M., Solarska‐Ściuk, K., Procházková, R., Novotný, V., Mullerova, J., Mikeš, P., & Jenčová, V. (2020) · eXPRESS Polymer Letters · doi:10.3144/expresspolymlett.2020.80 · Cited by 19
The use of crossflow to improve nonwoven melt‐blown fibers
Milligan, M. W., Lu, F., Buntin, R., & Wadsworth, L. C. (1992) · Journal of Applied Polymer Science · doi:10.1002/app.1992.070440212 · Cited by 18 · cited 1×
“[106] worked on the influence of an additional unheated air flow namely crossflow on the MB fiber morphology.”
BackgroundFiber diameter of polybutylene terephthalate melt‐blown nonwovens
Chen, T., Li, L., & Huang, X. (2005) · Journal of Applied Polymer Science · doi:10.1002/app.21932 · Cited by 18 · cited 1×
“[127] obtained that PBT (MFI1⁄4 62 g/10min @250�C, 2.”
Fundamental Description of the Melt Blowing Process
Yin, H., Yan, Z., Ko, W.-C., & Bresee, R. R. (2000) · International Nonwovens Journal · doi:10.1177/1558925000os-900408 · Cited by 18 · cited 2×
“Besides, as fiber jet travels along the collector the molecules become oriented [122].”
BackgroundMethodThe Effects of Processing Parameter on Melt-Blown Filtration Materials
Xu, Q. Y., & Wang, Y. M. (2013) · Advanced materials research · doi:10.4028/www.scientific.net/amr.650.78 · Cited by 17 · cited 4×
“It also results in a softer, fluffier structure, so increasing DCD decreased fiber mat solidity [93,125].”
BackgroundInfluentialYu, B., Sun, H., Cao, Y., Han, J., Kong, J., Wang, P., & Zhu, F. (2014) · Polymer-Plastics Technology and Engineering · doi:10.1080/03602559.2014.935396 · Cited by 17
Drábek, J., & Zatloukal, M. (2020) · Physics of Fluids · doi:10.1063/5.0020773 · Cited by 17 · cited 1×
“They also found that the CV of fiber diameter distribution significantly decreases due to the extensional strain hardeningat the post die zone [90].”
BackgroundUse of Oscillating Gas Jets in Fiber Processing
Tyagi, M. K., & Shambaugh, R. L. (1995) · Industrial & Engineering Chemistry Research · doi:10.1021/ie00041a027 · Cited by 16 · cited 9×
“[121] Moore EM, Papavassiliou DV and Shambaugh RL. Air velocity, air temperature, fiber vibration and fiber diameter measurements on a practical melt blowing die.”
BackgroundInfluentialModifying Air Fields To Improve Melt Blowing
Shambaugh, B. R., Papavassiliou, D. V., & Shambaugh, R. L. (2012) · Industrial & Engineering Chemistry Research · doi:10.1021/ie202501u · Cited by 16 · cited 1×
“A slight decrease in the crystalline fraction of the MB fibers is expected in the case of semi-crystalline polymers due to the rapid cooling of the polymeric fibersas a nature of the melt blowing techniques [75,116].”
BackgroundYu, Y., & Shim, E. (2020) · Journal of Applied Polymer Science · doi:10.1002/app.50230 · Cited by 16
Fiber spiral motion in a swirl die melt-blowing process
Xie, S. J., & Zeng, Y. (2014) · Fibers and Polymers · doi:10.1007/s12221-014-0553-9 · Cited by 15 · cited 1×
“[114] reported that the spiral path of whipping close to the die plays an important role in fiber attenuation.”
BackgroundRuamsuk, R., Takarada, W., & Kikutani, T. (2016) · International Polymer Processing · doi:10.3139/217.3163 · Cited by 15 · cited 2×
“It occurs because of the strong cooling effect on the thinned fibers [80].”
BackgroundAdvancements in the production of meltblown fibres
Henry, J. J., Goldbach, J. T., Stabler, S. M., Devisme, S., & Chauveau, J. (2016) · Filtration & Separation · doi:10.1016/s0015-1882(16)30123-9 · Cited by 15 · cited 2×
“Polymer Average fiber diameter (mm) MFI ASTM D1238 (viscosity) Melt temperature ( C) Reference Polypropylene (PP) 0.3 1500 220 [73] Polyphenylene sulfide (PPS) 4.1 N/A N/A [74] Polyethylene terephthalate (PET) 5 375 315 [75,76] Polystyrene (PS) 0.38 (1.1)* 280 [73] Polyamide (PA) (66,61,112) 0.8 N/A N/A [55] Polyethyl…”
InfluentialFiltration Efficiency of Electret Air Filters Reinforced by Titanium Dioxide
Lou, C., Shih, Y.-H., Huang, C., Lee, S.-A., Chen, Y.-S., & Lin, J. (2020) · Applied Sciences · doi:10.3390/app10082686 · Cited by 15
The influence of fiber and fabric properties on nonwoven performance
Tsai, P. P., & Yan, Y. (2010) · Elsevier eBooks · doi:10.1533/9781845699741.1.18 · Cited by 14
Filtration Properties of Nonwoven Structures with Superabsorbents for Respiratory Protective Devices
Brochocka, A. (2017) · Fibres and Textiles in Eastern Europe · doi:10.5604/01.3001.0010.1691 · Cited by 14 · cited 1×
“Brochocka [161] produced PP (MFI: 800 g/10min @230�C, 2.”
Meltblown Fabrics from Biodegradable Polymers
Müller, D., & Krobjilowski, A. (2001) · International Nonwovens Journal · doi:10.1177/1558925001os-1000106 · Cited by 14
Efficiency of Electret Polycarbonate Nonwovens in Respiratory Protection Against Nanoparticles
Brochocka, A. (2017) · Autex Research Journal · doi:10.1515/aut-2017-0004 · Cited by 13
Fiber Motion near the Collector during Melt Blowing Part 1: General Considerations
Bresee, R. R. (2002) · International Nonwovens Journal · doi:10.1177/1558925002os-01100207 · Cited by 13 · cited 3×
“In addition to this, decreasing DCD results in increasing fiber separation in a high air flow and could turn in reducing the number of fiber entanglements [125].”
BackgroundThe role of electrospun nanofibers in the fight against the COVID-19
Molnár, K., & Meszaros, L. (2020) · eXPRESS Polymer Letters · doi:10.3144/expresspolymlett.2020.49 · Cited by 13 · cited 1×
“The outbreak of the coronavirus (COVID-19) pandemic revealed that respiratory protection plays a vital role in the present world and the development of ultrafine polymeric fiber mats highly efficient filters allowing filtration of a wide range of particles, viruses, and aerosol is necessary [133,134].”
BackgroundSelf-citationEvaluation of a New Bioactive Nonwoven Fabric for Respiratory Protection
Majchrzycka, K. (2014) · Fibres and Textiles in Eastern Europe · Cited by 11
Fiber Motion near the Collector during Melt Blowing: Part 2 — Fly Formation
Bresee, R. R., & Qureshi, U. A. (2002) · International Nonwovens Journal · doi:10.1177/1558925002os-01100306 · Cited by 11 · cited 1×
“would fuse into a film-like body on the collector [100].”
BackgroundVelu, Y. K., Ghosh, T. K., & Seyam, A. M. (2003) · Textile Research Journal · doi:10.1177/004051750307301107 · Cited by 10 · cited 1×
“defect formation, larger pores and larger basis weight), which is unfavorable [95,96].”
BackgroundStructure of Melt-Blown Polymer Fibrous Materials (PFM)
Pinchuk, L. S., Goldade, V. A., Makarevich, A. V., & Kestelman, V. N. (2002) · Springer eBooks · doi:10.1007/978-3-642-55984-6_4 · Cited by 8 · cited 1×
“Often a combination of multiple properties is desired, and that can be achieved with precisely engineered equipment operated within a rather narrow processing window, accurately designed processing parameters, or combination of two or more synthetic materials [24,25].”
BackgroundInnovative Polytrimethylene Terephthalate (Ptt) Polymers for Technical Nonwovens
Zhang, D., Sun, C., Beard, J., Zhao, W., Carson, I. G., & Hwo, C. (2002) · Journal of Industrial Textiles · doi:10.1106/152808302025393 · Cited by 8
Properties of Nonwoven Filter Media
Hutten, I. M. (2007) · Elsevier eBooks · doi:10.1016/b978-185617441-1/50018-4 · Cited by 8
Majchrzycka, K., & Brochocka, A. (2015) · Fibres and Textiles in Eastern Europe · doi:10.5604/12303666.1161766 · Cited by 7
Transmission of Small Particles through Selected Surgical Gown Fabrics
Leonas, K. K., & Huang, W. (1999) · International Nonwovens Journal · doi:10.1177/1558925099os-800116 · Cited by 6
Tsai, P. P.-Y. (2002) · International Nonwovens Journal · doi:10.1177/1558925002os-01100408 · Cited by 6 · cited 1×
“The relationship between pore size, solidity and fiber diameter is given by equations (1) and (2) [38,43]”
BackgroundNonwoven Laminates Containing Cotton for Medical Applications
Gosavi, N., Wadsworth, L. C., & Duckett, K. E. (1994) · Journal of Industrial Textiles · doi:10.1177/152808379402400106 · Cited by 4
Production of polypropylene melt blown nonwoven fabrics: Part II —Effect of process parameters
Bo, Z. (2012) · Cited by 4
UNDERSTANDING THE ROLE OF THE COLLECTOR DURING MELT BLOWING
Qureshi, U. A. (2001) · Cited by 3
EFFECT OF AIR QUENCHING ON CHARACTERISTICS OF THERMOPLASTIC POLYURETHANE MELTBLOWN NONWOVEN
Yeşil, Y. (2015) · TEKSTİL VE KONFEKSİYON · Cited by 3
Introduction (Historical Review)
Pinchuk, L. S., Goldade, V. A., Makarevich, A. V., & Kestelman, V. N. (2002) · Springer eBooks · doi:10.1007/978-3-642-55984-6_1 · Cited by 1
Research works printed but not linked: 22
- Kittelmannn W and Blechschmidt D. Extrusion nonwovens. In: Albrecht W, Fuchs H and Kittelmann W. (eds.) Nonwoven fabrics: raw materials, manufacture, applications, characteristics, testing processes. 1st ed. Weinheim: John Wiley & Sons, 2003, pp. 221-224.
- Bhat G, 2007, Handbook of nonwovens, 180
- Brochocka A, 2009, Fibres Text Eastern Europe, 17, 92
- Cheng S, Autex Res J
- 10.1201/9781351109079 · doi:10.1201/9781351109079
- Motyl E, 2006, Fibres Text Eastern Europe, 14
- Abd El-Hamied A-HA., 1997, Periodica Polytech Mech Eng, 41, 3
- Xiao Y, 2019, Autex Res J, 1
- Gombos Z., 2010, Analysis of glass fiber mat structures and their impact on the resin absorption process and on the characteristics of composites
- Jones AM. A study of resin melt flow rate and polydispersity effects on the mechanical properties of melt blown polypropylene webs. In: Fourth international conference on polypropylene fibers and textiles, Nottingham, UK, 23–25 September 1987.
- Dutton KC., 2008, J Text Apparel Technol Manage, 6
- Bresee RR, 2002, Int Nonwovens J
- Yeşil Y., 2015, J Text Apparel/Tekstil ve Konfeksiyon, 25
- Bresee RR, 2005, Int Nonwovens J
- Jirsák O, 1999, Nonwoven textiles
- Bo Z., 2012, Indian J Fibre Text Res, 37, 280
- Moore EM, 2004, Int Nonwovens J, 1558925004os
- Bresee RR., 2002, Int Nonwovens J
- Bo Z., 2012, Indian J Fibre Text Res, 37, 326
- Willeke K, 1999, Bioaerosols: assessment and control
- Roh S, 2020, Polymers, 11, 1882
- Kowalski W, 1999, Ashrae Trans, 105, 4
Cited by
Electrospinning based on benign solvents: current definitions, implications and strategies
Avossa, J., Herwig, G., Toncelli, C., Itel, F., & Rossi, R. M. (2022) · Green Chemistry · doi:10.1039/d1gc04252a · Cited by 233
Recreating the heart's helical structure-function relationship with focused rotary jet spinning
Chang, H., Liu, Q., Zimmerman, J. F., Lee, K. Y., Jin, Q., Peters, M. M., Rosnach, M., Choi, S., Kim, S. L., Ardoña, H. A. M., et al. (2022) · Science · doi:10.1126/science.abl6395 · Cited by 131
Lyu, L., Bagchi, M., Markoglou, N., An, C., Peng, H., Bi, H., Yang, X., & Sun, H. (2023) · Journal of Hazardous Materials · doi:10.1016/j.jhazmat.2023.132566 · Cited by 126
Advances in Biomedical Applications of Solution Blow Spinning
Carriles, J., Nguewa, P., & González‐Gaitano, G. (2023) · International Journal of Molecular Sciences · doi:10.3390/ijms241914757 · Cited by 65
“Finally, by increasing the temperature or the air temperature, the viscosity decreases, and consequently, the diameter of the fibers is reduced [60,61].”
Chen, M., Hu, Q., Wang, X., & Zhang, W. (2023) · Separation and Purification Technology · doi:10.1016/j.seppur.2023.125404 · Cited by 64
Metadata
- Authors
- Kara, Y., & Molnár, K.
- Affiliations
- Budapest University of Technology and Economics (HU)
- Corresponding author
- Molnár, Kolos
- Venue
- Journal of Industrial Textiles
- Publisher
- SAGE Publications
- Published
- 2021-05-26
- Volume
- 51
- Issue
- 1_suppl
- Pages
- 137S-180S
- ISSN
- 0093-4658 (ISSN-L)
- 1528-0837
- 1530-8057
- OpenAlex
- W3167984341
- Cited by
- 97
- References
- 152
- Citations by year
- 2026: 19 · 2025: 20 · 2024: 24 · 2023: 19 · 2022: 13 · 2021: 2
- FWCI
- 4.26
- Type
- journal article
- Language
- en
- Open access
- bronze
- doi.org
- Licence
- journals.sagepub.com/page/policies/text-and-data-mining-license (tdm)
- Locations
- Journal of Industrial Textiles (publishedVersion)
- Repository of the Academy's Library (Library of the Hungarian Academy of Sciences) (acceptedVersion)
- DOAJ (DOAJ: Directory of Open Access Journals) (submittedVersion, cc-by-sa)
- Funders
- Ministry for Innovation and Technology (ÚNKP-20-5 New National Excellence Program)
- Budapest University of Technology and Economics (TKP2020, Institutional Excellence Program)
- National Research Development and Innovation Office (BME IE-NAT TKP2020)
- Hungarian Academy of Sciences (János Bolyai Research Scholarship)
- Topics
- Physical Sciences › Engineering › Electrical and Electronic Engineering › Aerosol Filtration and Electrostatic Precipitation
- Physical Sciences › Materials Science › Polymers and Plastics › Textile materials and evaluations
- Physical Sciences › Materials Science › Biomaterials › Electrospun Nanofibers in Biomedical Applications
- Keywords
- melt blowing, nonwoven fabrics, filtration efficiency, protective masks, pore size, porosity, fiber diameter, fiber packing density, air permeability, pressure drop, particle trapping, COVID-19 masks
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.