A review of processing strategies to generate melt-blown nano/microfiber mats for high-efficiency filtration applications
Open accessThe DOI matches its Crossref record; 134 of the 152 references it cites were found in a registry or an index.
Abstract
Protective masks – worn properly - have become the key to wither away the COVID-19 pandemic. Nowadays, the vast majority of these masks are made of nonwoven fabrics. High-quality products have mainly melt-blown filtering layers of nano/microfiber. Melt blowing produces very fine synthetic nonwovens from a wide range of polymers and allows a fair control of the fiber structure and morphology that makes it ideal for filtration purposes. Melt blowing has a high throughput, and the low price of the filter makes these products widely available for civil use. Although melt-blown fiber applications were rapidly growing in the last three decades, we still have limited knowledge on the processing parameters. In this regard, we detailed the melt blowing parameters to obtain a filter media with high particle capturing efficiency and a low-pressure drop. We summarized the melt-blown fiber mat characteristics with specific attention to the pore size, the porosity, the fiber diameter, the fiber packing density and the air permeability desired for highly efficient filtration. Even though we cannot estimate the future social effects and the trauma caused by the current pandemic, and protective masks might remain a part of everyday life for a long while. That also implies that near-future investments in wider manufacturing capacities seem inevitable. This paper also aims to facilitate masks' production with improved filtration efficiency by reviewing the recent developments in melt blowing, the related applications, the effects of processing parameters on the structure and performance of the nonwoven products focusing on the filtration efficiency via knowledge.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Claims other papers make about this one
Each is checked against this paper’s own text: does it say what the citing paper says it does?
The cited source says what the claim attributes to it.
In the citing paper
“This throughput is comparable to those of melt-blowing processes (27) but is orders of magnitude greater (~106) than that of 3D extrusion printing, the speed of which declines rapidly at single-micrometer features (as a power law, with a scaling factor of ~2.8) (Fig. 4, D and E, and eq. S1).”
From Recreating the heart's helical structure-function relationship with focused rotary jet spinning (2022) · cites this paper as [27]
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
null (2016) · Philosophy Study · doi:10.17265/2159-5313/2016.09.003 · Cited by 28,317
Presumed Asymptomatic Carrier Transmission of COVID-19
Bai, Y., Yao, L., Wei, T., Tian, F., Jin, D.-Y., Chen, L., & Wang, M. (2020) · JAMA · doi:10.1001/jama.2020.2565 · Cited by 4,498 · cited 1×
“In addition to these, MB nonwovens can also be utilized in a wide range of applications including drug delivery, membrane separation, battery separators, skin and wound dressing and reinforced composite materials [10–16] and they play a crucial role in the fight against the Severe acute respiratory syndrome coronaviru…”
BackgroundCOVID-19 infection: Emergence, transmission, and characteristics of human coronaviruses
Shereen, M. A., Khan, S., Kazmi, A., Bashir, N., & Siddique, R. (2020) · Journal of Advanced Research · doi:10.1016/j.jare.2020.03.005 · Cited by 3,536
What does the COVID-19 pandemic teach us about global value chains? The case of medical supplies
Gereffi, G. (2020) · Journal of International Business Policy · doi:10.1057/s42214-020-00062-w · Cited by 888 · cited 1×
“In addition to these, MB nonwovens can also be utilized in a wide range of applications including drug delivery, membrane separation, battery separators, skin and wound dressing and reinforced composite materials [10–16] and they play a crucial role in the fight against the Severe acute respiratory syndrome coronaviru…”
BackgroundMelt blown nanofibers: Fiber diameter distributions and onset of fiber breakup
Ellison, C. J., Phatak, A., Giles, D. W., Macosko, C. W., & Bates, F. S. (2007) · Polymer · doi:10.1016/j.polymer.2007.04.005 · Cited by 497 · cited 2×
“Violent vibrations can cause fiber breakage, shots and sticking [73].”
BackgroundBałazy, A., Toivola, M., Adhikari, A., Sivasubramani, S. K., Reponen, T., & Grinshpun, S. A. (2006) · American Journal of Infection Control · doi:10.1016/j.ajic.2005.08.018 · Cited by 376 · cited 1×
“Thus, at least N95, KN95, FFP2 or equivalent respirators are recommended for the protection against the airborne viruses such as the SARS-CoV-2 new coronavirus for those in high risk environments [30,37].”
BackgroundFabrication of nanofiber meltblown membranes and their filtration properties
Hassan, M. A., Yeom, B. Y., Wilkie, A., Pourdeyhimi, B., & Khan, S. A. (2013) · Journal of Membrane Science · doi:10.1016/j.memsci.2012.09.050 · Cited by 267
Fundamentals and Applications of Micro- and Nanofibers
Yarin, A. L., Pourdeyhimi, B., & Ramakrishna, S. (2014) · Cambridge University Press eBooks · doi:10.1017/cbo9781107446830 · Cited by 233
Electrospun ultrafine fibers for advanced face masks
Zhang, Z., Ji, D., He, H., & Ramakrishna, S. (2021) · Materials Science and Engineering: R: Reports · doi:10.1016/j.mser.2020.100594 · Cited by 180
Meltblown fibers: Influence of viscosity and elasticity on diameter distribution
Tan, D. H., Zhou, C., Ellison, C. J., Kumar, S., Macosko, C. W., & Bates, F. S. (2010) · Journal of Non-Newtonian Fluid Mechanics · doi:10.1016/j.jnnfm.2010.04.012 · Cited by 151 · cited 1×
“[109] reported that increasing airflow rate from �147 l/min to �272 l/min increased the CV of fiber diameter from 10% to 20% while the fiber diameter decreased around 40%.”
Background
Research works printed but not linked: 22
- Kittelmannn W and Blechschmidt D. Extrusion nonwovens. In: Albrecht W, Fuchs H and Kittelmann W. (eds.) Nonwoven fabrics: raw materials, manufacture, applications, characteristics, testing processes. 1st ed. Weinheim: John Wiley & Sons, 2003, pp. 221-224.
- Bhat G, 2007, Handbook of nonwovens, 180
- Brochocka A, 2009, Fibres Text Eastern Europe, 17, 92
- Cheng S, Autex Res J
- 10.1201/9781351109079 · doi:10.1201/9781351109079
- Motyl E, 2006, Fibres Text Eastern Europe, 14
- Abd El-Hamied A-HA., 1997, Periodica Polytech Mech Eng, 41, 3
- Xiao Y, 2019, Autex Res J, 1
- Gombos Z., 2010, Analysis of glass fiber mat structures and their impact on the resin absorption process and on the characteristics of composites
- Jones AM. A study of resin melt flow rate and polydispersity effects on the mechanical properties of melt blown polypropylene webs. In: Fourth international conference on polypropylene fibers and textiles, Nottingham, UK, 23–25 September 1987.
- Dutton KC., 2008, J Text Apparel Technol Manage, 6
- Bresee RR, 2002, Int Nonwovens J
- Yeşil Y., 2015, J Text Apparel/Tekstil ve Konfeksiyon, 25
- Bresee RR, 2005, Int Nonwovens J
- Jirsák O, 1999, Nonwoven textiles
- Bo Z., 2012, Indian J Fibre Text Res, 37, 280
- Moore EM, 2004, Int Nonwovens J, 1558925004os
- Bresee RR., 2002, Int Nonwovens J
- Bo Z., 2012, Indian J Fibre Text Res, 37, 326
- Willeke K, 1999, Bioaerosols: assessment and control
- Roh S, 2020, Polymers, 11, 1882
- Kowalski W, 1999, Ashrae Trans, 105, 4
Cited by
Electrospinning based on benign solvents: current definitions, implications and strategies
Avossa, J., Herwig, G., Toncelli, C., Itel, F., & Rossi, R. M. (2022) · Green Chemistry · doi:10.1039/d1gc04252a · Cited by 233
Recreating the heart's helical structure-function relationship with focused rotary jet spinning
Chang, H., Liu, Q., Zimmerman, J. F., Lee, K. Y., Jin, Q., Peters, M. M., Rosnach, M., Choi, S., Kim, S. L., Ardoña, H. A. M., et al. (2022) · Science · doi:10.1126/science.abl6395 · Cited by 131
Lyu, L., Bagchi, M., Markoglou, N., An, C., Peng, H., Bi, H., Yang, X., & Sun, H. (2023) · Journal of Hazardous Materials · doi:10.1016/j.jhazmat.2023.132566 · Cited by 126
Advances in Biomedical Applications of Solution Blow Spinning
Carriles, J., Nguewa, P., & González‐Gaitano, G. (2023) · International Journal of Molecular Sciences · doi:10.3390/ijms241914757 · Cited by 65
“Finally, by increasing the temperature or the air temperature, the viscosity decreases, and consequently, the diameter of the fibers is reduced [60,61].”
Chen, M., Hu, Q., Wang, X., & Zhang, W. (2023) · Separation and Purification Technology · doi:10.1016/j.seppur.2023.125404 · Cited by 64
Cimini, A., Imperi, E., Picano, A., & Rossi, M. (2023) · Applied Materials Today · doi:10.1016/j.apmt.2023.101833 · Cited by 63
“The productivity efficiency of synthetic PP and biodegradable PLA electrospun membranes were comparable with those reported for standard MB lines, which provided high throughput rate around ~1 kg/h [21].”
InfluentialResearch progress in preparation, properties, and applications of medical protective fiber materials
Su, X., Jia, C., Xiang, H., & Zhu, M. (2023) · Applied Materials Today · doi:10.1016/j.apmt.2023.101792 · Cited by 55
“The diameter of micro/nanofibers mainly depends on extrusion speed, polymer melt viscosity and temperature, airflow temperature, and speed [41].”
Recent progress in the development of porous polymeric materials for oil ad/absorption application
Lee, H., Chen, G., Chang, B. P., & Mekonnen, T. H. (2024) · RSC Applied Polymers · doi:10.1039/d4lp00211c · Cited by 40
Review of Current and Future Indoor Air Purifying Technologies
Singh, S., Vishwakarma, P., & Gupta, T. (2024) · ACS ES&T Engineering · doi:10.1021/acsestengg.4c00460 · Cited by 36
Scaffaro, R., & Citarrella, M. C. (2024) · Sustainable materials and technologies · doi:10.1016/j.susmat.2024.e01146 · Cited by 31
From Fiber to Power: Recent Advances Toward Electrospun‐Based Nanogenerators
Li, X., Li, J., Li, K., Zhang, S. R., Yang, Z., Zhang, C., Zhang, J., Li, Y., Zhang, D., Liu, Y., et al. (2025) · Advanced Functional Materials · doi:10.1002/adfm.202418066 · Cited by 36
Ávila‐Orta, C. A., Covarrubias‐Gordillo, C. A., Fonseca‐Florido, H. A., Melo, L., Radillo-Ruíz, R., & Gutiérrez-Montiel, E. (2023) · Carbohydrate Polymers · doi:10.1016/j.carbpol.2023.120975 · Cited by 30
Decomposition Behavior of Stereocomplex PLA Melt-Blown Fine Fiber Mats in Water and in Compost
Kara, Y., & Molnár, K. (2022) · Journal of Polymers and the Environment · doi:10.1007/s10924-022-02694-w · Cited by 31
“The low PDLA viscosity resulted in larger attenuation of the polymeric jets, which translated to enhanced molecular orientation and thermal stability [39, 40].”
BackgroundSelf-citationOverview of the Fiber Dynamics during Melt Blowing
Sun, G., Han, W., Wang, Y., Xin, S., Yang, J., Zou, F., Wang, X., & Xiao, C. (2022) · Industrial & Engineering Chemistry Research · doi:10.1021/acs.iecr.1c03972 · Cited by 26
Baselga, M., Yus, C., Arruebo, M., Sebastián, V., Irusta, S., & Jiménez, S. (2022) · Nanomaterials · doi:10.3390/nano12060925 · Cited by 25
“For example, production rates of up to 150 kg/h/m have been reported in meltblown processes (fibers 1–25 μm) using 12,000 nozzles per meter [62].”
MethodA novel method and printhead for 3D printing combined nano-/microfiber solid structures
Kara, Y., Kovács, N. K., Nagy-György, P., Boros, R., & Molnár, K. (2022) · Additive manufacturing · doi:10.1016/j.addma.2022.103315 · Cited by 24
“The method is rooted in melt blowing, for which the polymer melt is extruded through a die containing numerous small capillaries and then stretched via a jet of hot air [23].”
Self-citationZhu, Y., Gu, X., Dong, Z., Wang, B., Jin, X., Chen, Y., Cui, M., Wang, R., & Zhang, X. (2023) · RSC Advances · doi:10.1039/d2ra08274h · Cited by 21
High-breathable, antimicrobial and water-repellent face mask for breath monitoring
Zhang, F., Lin, J., Yang, M., Wang, Y., Ye, Z., He, J., Shen, J., Zhou, X., Guo, Z., Zhang, Y., et al. (2023) · Chemical Engineering Journal · doi:10.1016/j.cej.2023.143150 · Cited by 21
An In-Depth Exploration of Nonwoven Materials in the Healthcare and Medical Sector
Dhabliya, D., Veeraiah, V., Dari, S. S., Kumar, J. R. R., Dhabliya, R., Gupta, A., & Pramanik, S. (2024) · Advances in healthcare information systems and administration book series · doi:10.4018/979-8-3693-1214-8.ch015 · Cited by 19
Zhang, H., Zhen, Q., Liu, Z., Cui, J., & Qian, X. (2022) · Colloids and Surfaces A Physicochemical and Engineering Aspects · doi:10.1016/j.colsurfa.2022.129174 · Cited by 19
Influence of Modified Carbon Black on Nylon 6 Nonwoven Fabric and Performance as Adsorbent Material
Andrade-Guel, M. L., Reyes-Rodríguez, P. Y., Cabello-Alvarado, C. J., Cadenas‐Pliego, G., & Ávila‐Orta, C. A. (2022) · Nanomaterials · doi:10.3390/nano12234247 · Cited by 19
Crawford, E. A., Gupta, S., Trinh, B. M., & Mekonnen, T. H. (2024) · Polymer · doi:10.1016/j.polymer.2024.126942 · Cited by 18
Kalani, S., Jubinville, D., & Mekonnen, T. H. (2025) · Advanced Sustainable Systems · doi:10.1002/adsu.202400898 · Cited by 16
Lee, H.-J., Trinh, B. M., Crawford, E. A., & Mekonnen, T. H. (2023) · Separation and Purification Technology · doi:10.1016/j.seppur.2023.124761 · Cited by 18
Qu, M., Guo, Y., Cai, Y., Nie, Z., & Zhang, C. (2024) · Small · doi:10.1002/smll.202310273 · Cited by 14
Kang, L., Huang, S., Qin, X., Gao, X., Li, Y., & Zhang, X. (2024) · ACS Applied Nano Materials · doi:10.1021/acsanm.4c00751 · Cited by 13
Effects of Melt-Blown Processing Conditions on Nonwoven Polylactic Acid and Polybutylene Succinate
Pratumpong, P., Cholprecha, T., Roungpaisan, N., Srisawat, N., Toommee, S., Pechyen, C., & Parcharoen, Y. (2023) · Polymers · doi:10.3390/polym15204189 · Cited by 13
Kara, Y., & Molnár, K. (2022) · Polymer Composites · doi:10.1002/pc.26812 · Cited by 13
Self-citationYardımcı, A. İ., Durmus, A., Kayhan, M., & Tarhan, Ö. (2022) · Journal of Macromolecular Science Part B · doi:10.1080/00222348.2022.2101970 · Cited by 13
“particles more effectively, and fewer particles and fluid can pass through the filtering media.([48]) Thus, our results indicated that AgNO3 inserted PAN/PVDF nanofibrous membranes produced in this study were suitable to utilize for different air filter applica-”
ResultHydrogen Peroxide-Induced Controlled Degradation of Poly(lactic acid) for Melt-Blown Nonwovens
Binley, G., Jubinville, D., Prince, E., & Mekonnen, T. H. (2024) · ACS Applied Polymer Materials · doi:10.1021/acsapm.4c02897 · Cited by 12
Jiang, N., Wang, Q., Zhang, H., Liu, Z., Yang, H., Chen, R., & Lu, Z. (2023) · Journal of environmental chemical engineering · doi:10.1016/j.jece.2023.111284 · Cited by 11
Experimental Study of the Airflow Field and Fiber Motion in the Melt-Blowing Process
Wu, W., Han, W., Sun, Y., Yi, H., & Wang, X. (2024) · Polymers · doi:10.3390/polym16040469 · Cited by 10
Zhang, Y., Wang, J., Yuan, S., Hussain, M. A., Ye, X., Fang, Y., Yu, B., & Zhu, F. (2024) · Industrial & Engineering Chemistry Research · doi:10.1021/acs.iecr.4c01438 · Cited by 9
Wang, X., Liu, H., Cui, W., Li, Y., Guan, X., & Liu, Y. (2024) · Journal of Materials Chemistry A · doi:10.1039/d4ta06493c · Cited by 8
Controlled Degradation of PBAT for PBAT/PLA Blend Melt‐Blown Nonwovens
Binley, G., & Mekonnen, T. H. (2025) · Macromolecular Rapid Communications · doi:10.1002/marc.202500276 · Cited by 7
Liang, S., Qian, K., Xu, M., Cui, W., Li, Y., Lu, Y., Liu, S., Zhao, S., Xue, Z., Guo, C., et al. (2025) · Journal of Alloys and Compounds · doi:10.1016/j.jallcom.2025.181297 · Cited by 7
Abdel‐Mouttalib, K., Nadi, A., Tetouani, S., Hajjaji, A., Cherkaοui, O., & Touhtouh, S. (2024) · SPE Polymers · doi:10.1002/pls2.10163 · Cited by 6
Winnacker, M. (2025) · Macromolecular Materials and Engineering · doi:10.1002/mame.202400380 · Cited by 6
Nciri, N., & Kim, N. (2023) · Polymers · doi:10.3390/polym15244624 · Cited by 6
Poly(Lactide) Nonwoven Fabric with Iron Coating and Its Biological Properties
Mrozińska, Z., Świerczyńska, M., Juszczak, M., Woźniak, K., & Kudzin, M. H. (2024) · Coatings · doi:10.3390/coatings14081050 · Cited by 7
Yang, X., Sun, H., Gao, T., Sun, Y., Li, J., Lei, S., & Yu, B. (2024) · Polymer · doi:10.1016/j.polymer.2024.127779 · Cited by 5
Yardımcı, A. İ., László, T., & Yardimci, C. (2024) · Bulletin of Materials Science · doi:10.1007/s12034-023-03134-8 · Cited by 5
Hiller, T., Gutbrod, F., Bonten, L., Vocht, M., Azimian, M., Resch, J., Bonten, C., & Winnacker, M. (2024) · Polymers · doi:10.3390/polym17010051 · Cited by 6
Melt-blown fiber mat interleaving enhances the performance of single-polypropylene composites
Kara, Y., & Molnár, K. (2022) · Journal of Reinforced Plastics and Composites · doi:10.1177/07316844221087736 · Cited by 5
“Melt blowing typically generates self-bonded and highly entangled fiber mats that derive their strength from fiber-to-fiber contacts besides the intrinsic material properties.(24) And so, the newly formed fiber’s ability to penetrate to the fibers already on the collector significantly affects the fiber mat’s load-bea…”
BackgroundSelf-citationChen, Y., Huang, Q., Lin, Y., Ding, B., Yu, J., Wang, H., & Wang, X. (2025) · ACS Applied Polymer Materials · doi:10.1021/acsapm.5c00429 · Cited by 4
Moon, E., Lim, J., Kim, M., & Kim, H. S. (2025) · Polymer Engineering and Science · doi:10.1002/pen.27289 · Cited by 4
Hyssop-infused Electrospun Nanofiber Mask for Antiviral Protection
Khalili, E., Mehrabi, F., Korrani, Z. S., & Kamyab, H. (2025) · BioNanoScience · doi:10.1007/s12668-025-02186-w · Cited by 4
“Compared with conventional melt-blown microfibers widely used for low-cost nonwoven filter media [38, 27, 23], electrospun fibers demonstrate smaller diameters, higher surface area, and narrower pore sizes, which enhance both performance and user comfort [48, 52, 54].”
A Comprehensive Review on Nonwoven Materials for the Healthcare Sector
Roy, R. (2024) · Advances in human and social aspects of technology book series · doi:10.4018/979-8-3693-2569-8.ch017 · Cited by 4
Electrostatic Properties of Nonwoven Masks Made of Polylactic Acid
Zhu, Q., Kiuchi, S., Pennington, M., Hashimoto, T., & Sugihara, K. (2025) · ACS Omega · doi:10.1021/acsomega.5c02906 · Cited by 4
Masionė, G., Čiužas, D., Krugly, E., Prasauskas, T., Tichonovas, M., & Martuzevičius, D. (2025) · Materials Science and Engineering B · doi:10.1016/j.mseb.2025.119039 · Cited by 3
Zatloukal, M., & Drábek, J. (2021) · Physics of Fluids · doi:10.1063/5.0060120 · Cited by 3
“at high speeds and/or in the small channels where orientational and/or stretch Weissenber number is higher than 1 [1, 2]) is essential for the optimization and development of new polymeric materials used to produce micro/nano-products via advanced technologies such as additive manufacturing (alias 3D printing) [3-8] m…”
BackgroundA Study on the Utilization of Ursodeoxycholic Acid Through Electrospinning Optimization
Shin, Y. W., Lee, J. C., In, S. H., Park, C. H., & Kim, C. S. (2024) · ChemistrySelect · doi:10.1002/slct.202400463 · Cited by 3
Kaneko, M., Takagaki, K., Tsuchimoto, R., & Ishii, Y. (2024) · Smart Materials and Structures · doi:10.1088/1361-665x/ad6bd8 · Cited by 3
Zhao, B., Liu, C., Wang, Z., Feng, Q., Han, X., Zhang, J. C., Hu, C., & Han, D. (2024) · Molecules · doi:10.3390/molecules29122891 · Cited by 2
“Existing microfiber manufacturing methods include direct spinning [1,2], conjugate spinning (islands-in-sea type [3–5], split type [6–8], and multi-layer type [9,10]), and random spinning (melt blowing [11–13], spun bonding [14–16], flash spinning [17,18], and electrospinning [19–21]).”
MethodZhang, Z., Song, C. K., Roy, O., Beckers, K., Ragai, I., Love, B. J., Larson, R. G., & Shih, A. J. (2025) · Separation and Purification Technology · doi:10.1016/j.seppur.2025.136700 · Cited by 2
Czyz, E., Štorková, M., Erben, J., Holec, P., Švec, F., & Šatínský, D. (2026) · Advances in Sample Preparation · doi:10.1016/j.sampre.2026.100229 · Cited by 2
Flexible Continuous Sweat Glucose Electrochemical Sensor Based on Ni/Co-MOF@PPSF
Feng, Y., Sun, H. M., Liu, X., Wu, H., Chen, G. L., Gao, A., Wang, S., Zhou, J., & Yu, B. (2026) · ACS Omega · doi:10.1021/acsomega.5c10950 · Cited by 2
Hiller, T., Azimian, M., Bonten, L., & Marx, B. (2026) · Journal of Engineered Fibers and Fabrics · doi:10.1177/15589250261416520 · Cited by 2
SHUMSKAYA, V. Y., Николаевич, Г. П., Zotov, S. V., Шаповалов, В. М., & Grigoriev, А. Y. (2022) · Polymer materials and technologies · doi:10.32864/polymmattech-2022-8-3-6-23 · Cited by 2
Numerical analysis of airflow fields in new modified melt-blowing dies
Zou, F., Zhou, Q., & Wang, X. (2023) · Textile Research Journal · doi:10.1177/00405175231194792 · Cited by 2
“53 In the range of 1.5–5 mm from the bottom of the die face, the attenuation of the polymer jet gradually slowed down due to the gradual decrease of the air velocity and the polymer jet temperature.”
BackgroundInfluentialChen, M., Sun, J., Hu, Q., Wang, X., Zhang, W., & Li, Y. (2025) · Journal of Applied Polymer Science · doi:10.1002/app.56762 · Cited by 2
Tensile Strength of Continuous and Disordered Fibrous Mats: A Tale of Two‐Length Scales
Rawal, A., Singh, D., Maurya, A., Szenti, I., Kukovecz, Á., Kudisonga, C., & Heitzmann, M. T. (2025) · Macromolecular Rapid Communications · doi:10.1002/marc.202400943 · Cited by 2
Chen, C.-H., Lee, C.-F., & Hsiao, C. (2023) · Machines · doi:10.3390/machines11040476 · Cited by 1
Ahmedullah, M., Whiley, H., Fallowfield, H., & Köper, I. (2024) · Advanced Materials Interfaces · doi:10.1002/admi.202400155 · Cited by 1
Meltblow Processing of Poly (Ethylene Furanoate)–Bio-Based Polyester Nonwovens
Hiller, T., Altmann, H. J., Elser, I., Azimian, M., & Buchmeiser, M. R. (2025) · Materials · doi:10.3390/ma18030544 · Cited by 1
“…meltblow process: • access to industrial relevant (per-hole) throughputs • delivering low fine (micro) fiber diameters (median and mean average) • comparable mechanical strength in MD and CD and air permeability values to PET • significant filtration performance before and after electret treatment.”
Moving From Micro‐ to Nanofibers Within Melt Electrospinning
Boland, B., Sheoran, N., Bochinski, J. R., & Clarke, L. (2025) · Journal of Applied Polymer Science · doi:10.1002/app.57366 · Cited by 1
Sun, Y., Wang, D., Zhao, Q., & Sun, G. (2026) · European Polymer Journal · doi:10.1016/j.eurpolymj.2026.114846 · Cited by 1
Dhar, A. K., Moldavchuk, I., Bhattacharjee, M., Nageotte, J., Bhat, G. S., & Mani, S. (2026) · Journal of Materials Science · doi:10.1007/s10853-026-13145-5 · Cited by 1
“Furthermore, nonwoven webs with finer fiber diameters efficiently captured particles, leading to enhanced adsorption and higher filtration efficiency [41, 44].”
InfluentialIslam, T., Munshi, M. H., Saha, R., Hussain, S. A., Shafin, A. A., Arefin, S., & Kamruzzaman, M. (2026) · Advanced Materials Interfaces · doi:10.1002/admi.70587 · Cited by 1
“The resultant fine nano/microfiber mats have a high porosity and surface area, giving them the adjustable permeability required for cutting-edge energy applications like battery and/or SC separators [58, 59].”
Conclusion of Experimental Results and Future Suggestions
Kara, Y. (2023) · Engineering materials · doi:10.1007/978-3-031-32577-9_6 · Cited by 1
Self-citationTahara, Y., Yamamoto, J., Nishiyama, T., Tomisawa, R., & Takigawa, R. (2024) · Sensors and Materials · doi:10.18494/sam4820 · Cited by 1
Bae, S., Ju, G., Jang, Y., Cho, J., Lee, M., & Suk, D. E. (2025) · ECS Journal of Solid State Science and Technology · doi:10.1149/2162-8777/adb5bd · Cited by 1
Study on property control of intercalated melt-blown nonwovens
Mai, Y., Zheng, Z., Hou, L., & Chen, H. (2022) · Journal of Physics Conference Series · doi:10.1088/1742-6596/2393/1/012039
VIRUS INACTIVATION BY NOVEL VIRUCIDAL MATERIALS
Singh, S. (2023) · Digital Commons - Michigan Tech (Michigan Technological University) · doi:10.37099/mtu.dc.etdr/1571
Kara, Y. (2023) · Engineering materials · doi:10.1007/978-3-031-32577-9_1
Self-citationRelationship between Permeability and Structure of CO2-Assisted Polymer Compression Products
Aizawa, T. (2023) · Membranes · doi:10.3390/membranes13060560
“Such filters are used in gas and liquid filtration applications and are an indispensable component in chemical plants and daily life [15,16].”
BackgroundOptimization of Performance Models for Interlayer Meltblown Nonwovens with Random Forest
Wang, P., Li, Y., Liang, Y., Zhu, X., Li, T., & Lv, W. (2023) · International Conference on Health Big Data and Intelligent Healthcare (ICHIH) · doi:10.1109/ichih60370.2023.10396000
“…and the rest of the indicators as the independent variables, to derive a nonlinear regression equation, which gives a functional expression for the filtration efficiency of the product. the least squares method, the model is solved by Spss to get the objective function[4] of filtration resistance.”
MethodAn In-Depth Analysis of Nonwoven Materials in the Medical Sector
Pramanik, S. (2024) · Advances in bioinformatics and biomedical engineering book series · doi:10.4018/979-8-3693-4439-2.ch002
Elektroprzędzone struktury ażurowe do zastosowań w inżynierii środowiska
Borowczak, M., Sobczyk, K., & Leluk, K. (2024) · Polimery · doi:10.14314/polimery.2024.6.2
Future perspective and outlook: Incorporation of advanced technology
Gao, H., Li, R., & Joshi, A. (2024) · Elsevier eBooks · doi:10.1016/b978-0-323-95316-0.00001-3
A MINI REVIEW OF NANOFIBER SYNTHESIS USING FLOW BLURRING ATOMIZATION
Swapnil, S., Doddamani, M. R., & Singh, G. (2025) · Atomization and Sprays · doi:10.1615/atomizspr.2025055522
FIBROUS-POROUS POLYMERIC MATERIALS FOR AIR AND GAS FILTRATION (REVIEW)
Goldade, V. A., Зотов, С. В., GARBARUK, V. Y., Kovalenko, M. A., & Шаповалов, В. М. (2025) · Polymer materials and technologies · doi:10.32864/polymmattech-2025-11-1-6-25
Goldade, V. A., Garboruk, V., & Зотов, С. В. (2025) · Theoretical & Applied Science · doi:10.15863/tas.2025.08.148.11
Wu, H., Xing, W., Zheng, C., Wang, L., & Li, J. (2025) · Journal of Industrial Textiles · doi:10.1177/15280837251377048
Roungpaisan, N., Jariyapunya, N., Srisawat, N., Pivsa‐Art, S., Pivsa‐Art, W., Tipboonsri, P., & Memon, A. (2025) · Current Research in Green and Sustainable Chemistry · doi:10.1016/j.crgsc.2025.100486
A Critical Review of Water Filtration Methods in Developing Countries
Yeo, W. S., Chong, S. K., Jeevanandam, J., & Phan, C. M. (2025) · Sustainable Engineering · doi:10.51200/susten.v2i2.6191
Bioactive Glass Reinforced Biodegradable Polymer Fibers for Skin Wound Healing
Zhou, T., Hou, J., & Zheng, K. (2025) · Royal Society of Chemistry eBooks · doi:10.1039/9781837677627-00053
Development of porous materials based on styrene-ethylene-butylene-styrene for oil spill remediation
Hyejin, L. (2023) · UWSpace (University of Waterloo)
Lai, Y., Lin, Y., Liao, Y., Kuo, M.-C., & Chen, C. (2026) · Polymer Engineering and Science · doi:10.1002/pen.70378
“Among various fabrication technologies, meltblown is particularly attractive because it produces ultrafine fibers (1–10 μm) with high surface area, fine pore structures, and excellent permeability [4–7].”
PP and Nanofibrillated-PET Composites from Melt Blowing: Fundamentals to Scale-Up
Mark, L. H. (2024) · TSpace (University of Toronto) · Cited by 1
Equipment and process for joining nonwoven polymer materials with dispersed fillers [in Ukrainian]
Євлашкін, М. В., Sivetskyi, V., Sokolskyi, O., & Швачко, Д. Г. (2026) · Proceedings of the NTUU “Igor Sikorsky KPI” Series Chemical engineering ecology and resource saving · doi:10.20535/2617-9741.1.2026.354344
Rocchetti, G. (2026) · AMS Degree Thesis (University of Bologna)
Hu, B., Wang, S. Y., Wu, J., Wu, J., Yu, J., & Ding, B. (2026) · Journal of the Textile Institute · doi:10.1080/00405000.2026.2653223
“The fibers used in melt-blown process for preparing sponges have small diameter, but the sponges are dense, resulting in heavy weight and compromised compressive resilience (Kara & Moln � ar, 2022; Zhang et al., 2023; Fang et al., 2025; Tomisawa et al., 2024).”
Structure, performance, and technical applications of melt-blown materials: A review
Hao, X., Liu, G., Xie, S., Xu, Y., Zhang, Y., Tao, J., Ma, W., Yang, Y., Ye, N., & 熊世鑫 (2026) · Composites Part B Engineering · doi:10.1016/j.compositesb.2026.113705
Wen, Y., Xu, Y., Bai, Q., & Zhou, J. (2026) · AIP Advances · doi:10.1063/5.0299509
Metallized thermoplastic nonwovens as integrated heating elements in fiber-reinforced composites
Latko‐Durałek, P., Misiak, M., Ufaysa, D. T., Tao, N., Przybyszewski, B., Durałek, P., Rutkowska, D., Kurkowska, M., Anisimov, A. G., Bergsma, O. K., et al. (2026) · Materials Today Communications · doi:10.1016/j.mtcomm.2026.115313
Parvez, M. M. H., Rahman, M. A., Chowdhury, M. A. S., Bappy, M. J. P., Uddin, M. N., Pandey, G., & Rana, S. M. S. (2026) · Next Sustainability · doi:10.1016/j.nxsust.2026.100330
Sivri, F. M., Hoda, N., Selek, M. A., & Kara, F. (2026) · ACS Omega · doi:10.1021/acsomega.5c13313
An overview of natural and modified flax fiber materials as sustainable filtration media
Aliasgharlou, N., Taghavi, L., Babalola, B. M., Ulrich, A., Cree, D. E., & Wilson, L. D. (2026) · Materials Today Communications · doi:10.1016/j.mtcomm.2026.115439 · Cited by 1
Thakur, B., Sinha‐Ray, S., & Venkatesan, H. (2026) · IntechOpen eBooks · doi:10.5772/intechopen.1015645
Metadata
- Authors
- Kara, Y., & Molnár, K.
- Affiliations
- Budapest University of Technology and Economics (HU)
- Corresponding author
- Molnár, Kolos
- Venue
- Journal of Industrial Textiles
- Publisher
- SAGE Publications
- Published
- 2021-05-26
- Volume
- 51
- Issue
- 1_suppl
- Pages
- 137S-180S
- ISSN
- 0093-4658 (ISSN-L)
- 1528-0837
- 1530-8057
- OpenAlex
- W3167984341
- Cited by
- 97
- References
- 152
- Citations by year
- 2026: 19 · 2025: 20 · 2024: 24 · 2023: 19 · 2022: 13 · 2021: 2
- FWCI
- 4.26
- Type
- journal article
- Language
- en
- Open access
- bronze
- doi.org
- Licence
- journals.sagepub.com/page/policies/text-and-data-mining-license (tdm)
- Locations
- Journal of Industrial Textiles (publishedVersion)
- Repository of the Academy's Library (Library of the Hungarian Academy of Sciences) (acceptedVersion)
- DOAJ (DOAJ: Directory of Open Access Journals) (submittedVersion, cc-by-sa)
- Funders
- Ministry for Innovation and Technology (ÚNKP-20-5 New National Excellence Program)
- Budapest University of Technology and Economics (TKP2020, Institutional Excellence Program)
- National Research Development and Innovation Office (BME IE-NAT TKP2020)
- Hungarian Academy of Sciences (János Bolyai Research Scholarship)
- Topics
- Physical Sciences › Engineering › Electrical and Electronic Engineering › Aerosol Filtration and Electrostatic Precipitation
- Physical Sciences › Materials Science › Polymers and Plastics › Textile materials and evaluations
- Physical Sciences › Materials Science › Biomaterials › Electrospun Nanofibers in Biomedical Applications
- Keywords
- melt blowing, nonwoven fabrics, filtration efficiency, protective masks, pore size, porosity, fiber diameter, fiber packing density, air permeability, pressure drop, particle trapping, COVID-19 masks
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.