The DOI matches its Crossref record; 68 of the 68 references it cites were found in a registry or an index.
A review of physics-based models in prognostics: Application to gears and bearings of rotating machinery
Open accessAbstract
Health condition monitoring for rotating machinery has been developed for many years due to its potential to reduce the cost of the maintenance operations and increase availability. Covering aspects include sensors, signal processing, health assessment and decision-making. This article focuses on prognostics based on physics-based models. While the majority of the research in health condition monitoring focuses on data-driven techniques, physics-based techniques are particularly important if accuracy is a critical factor and testing is restricted. Moreover, the benefits of both approaches can be combined when data-driven and physics-based techniques are integrated. This article reviews the concept of physics-based models for prognostics. An overview of common failure modes of rotating machinery is provided along with the most relevant degradation mechanisms. The models available to represent these degradation mechanisms and their application for prognostics are discussed. Models that have not been applied to health condition monitoring, for example, wear due to metal–metal contact in hydrodynamic bearings, are also included due to its potential for health condition monitoring. The main contribution of this article is the identification of potential physics-based models for prognostics in rotating machinery.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Miner, M. A. (1945) · Journal of Applied Mechanics · doi:10.1115/1.4009458 · Cited by 6,374
Contact of nominally flat surfaces
Greenwood, J. A., & Williamson, J. B. P. (1966) · Proceedings of the Royal Society of London. Series A. Mathematical and Physical Sciences · doi:10.1098/rspa.1966.0242 · Cited by 5,692
A review on machinery diagnostics and prognostics implementing condition-based maintenance
Jardine, A. K. S., Lin, D., & Banjevic, D. (2006) · Mechanical Systems and Signal Processing · doi:10.1016/j.ymssp.2005.09.012 · Cited by 4,816
Ensemble based systems in decision making
Polikar, R. (2006) · IEEE Circuits and Systems Magazine · doi:10.1109/mcas.2006.1688199 · Cited by 2,938
Proceedings of the 1999 American Control Conference
(1999) · Proceedings of the 1999 American Control Conference (Cat. No. 99CH36251) · doi:10.1109/acc.1999.782304 · Cited by 2,898
Rolling element bearing diagnostics—A tutorial
Randall, R. B., & Antoni, J. (2011) · Mechanical Systems and Signal Processing · doi:10.1016/j.ymssp.2010.07.017 · Cited by 2,744
A review on empirical mode decomposition in fault diagnosis of rotating machinery
Lei, Y., Lin, J., He, Z., & Zuo, M. J. (2013) · Mechanical Systems and Signal Processing · doi:10.1016/j.ymssp.2012.09.015 · Cited by 1,886
Introduction to continuum damage mechanics
Kachanov, L. M. (1986) · Mechanics of Elastic Stability · doi:10.1007/978-94-017-1957-5 · Cited by 1,879
Lee, J., Wu, F., Zhao, W., Ghaffari, M., Liao, L., & Siegel, D. (2014) · Mechanical Systems and Signal Processing · doi:10.1016/j.ymssp.2013.06.004 · Cited by 1,594
Tandon, N., & Choudhury, A. (1999) · Tribology International · doi:10.1016/s0301-679x(99)00077-8 · Cited by 1,351
Proceedings of IEEE International Conference on Systems, Man and Cybernetics
(1994) · Proceedings of IEEE International Conference on Systems, Man and Cybernetics · doi:10.1109/icsmc.1994.399796 · Cited by 1,341
Behavior of materials under conditions of thermal stress
Manson, S. S. (1953) · NASA STI Repository (National Aeronautics and Space Administration) · Cited by 1,235
Rotating machinery prognostics: State of the art, challenges and opportunities
Heng, A., Zhang, S., Tan, A. C. C., & Mathew, J. (2009) · Mechanical Systems and Signal Processing · doi:10.1016/j.ymssp.2008.06.009 · Cited by 1,207
Prognostic modelling options for remaining useful life estimation by industry
Sikorska, J. Z., Hodkiewicz, M., & Ma, L. (2011) · Mechanical Systems and Signal Processing · doi:10.1016/j.ymssp.2010.11.018 · Cited by 947
Neural-network-based motor rolling bearing fault diagnosis
Li, B., Chow, M.-Y., Tipsuwan, Y., & Hung, J. C. (2000) · IEEE Transactions on Industrial Electronics · doi:10.1109/41.873214 · Cited by 797
A Full Numerical Solution to the Mixed Lubrication in Point Contacts
Hu, Y.-Z., & Zhu, D. (2000) · Journal of Tribology · doi:10.1115/1.555322 · Cited by 569
A summary of fault modelling and predictive health monitoring of rolling element bearings
El-Thalji, I., & Jantunen, E. (2015) · Mechanical Systems and Signal Processing · doi:10.1016/j.ymssp.2015.02.008 · Cited by 447
System health monitoring and prognostics — a review of current paradigms and practices
Kothamasu, R., Huang, S. H., & VerDuin, W. H. (2006) · The International Journal of Advanced Manufacturing Technology · doi:10.1007/s00170-004-2131-6 · Cited by 424
Comparison of prognostic algorithms for estimating remaining useful life of batteries
Saha, B., Goebel, K., & Christophersen, J. (2009) · Transactions of the Institute of Measurement and Control · doi:10.1177/0142331208092030 · Cited by 423
JACK, L. B., & NANDI, A. K. (2002) · Mechanical Systems and Signal Processing · doi:10.1006/mssp.2001.1454 · Cited by 376
Paya, B. A., Esat, I. I., & Badi, M. N. M. (1997) · Mechanical Systems and Signal Processing · doi:10.1006/mssp.1997.0090 · Cited by 327
Tan, C. K., Irving, P. E., & Mba, D. (2005) · Mechanical Systems and Signal Processing · doi:10.1016/j.ymssp.2005.09.015 · Cited by 293
Sawalhi, N., & Randall, R. B. (2011) · Mechanical Systems and Signal Processing · doi:10.1016/j.ymssp.2010.09.009 · Cited by 283
APPLICATION OF SYNCHRONOUS AVERAGING TO VIBRATION MONITORING OF ROLLING ELEMENT BEARINGS
McFadden, P. D., & TOOZHY, M. M. (2000) · Mechanical Systems and Signal Processing · doi:10.1006/mssp.2000.1290 · Cited by 275
The Stribeck Curve: Experimental Results and Theoretical Prediction
Lu, X., Khonsari, M. M., & Gelinck, E. R. M. (2006) · Journal of Tribology · doi:10.1115/1.2345406 · Cited by 273
Induction Machine Condition Monitoring Using Neural Network Modeling
Su, H., & Chong, K. T. (2007) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2006.888786 · Cited by 271
Li, C., & Liang, M. (2011) · Mechanical Systems and Signal Processing · doi:10.1016/j.ymssp.2011.07.001 · Cited by 268
Prognostics, the real issues involved with predicting life remaining
Engel, S. J., Gilmartin, B. J., Bongort, K., & Hess, A. (2002) · 2000 IEEE Aerospace Conference. Proceedings (Cat. No.00TH8484) · doi:10.1109/aero.2000.877920 · Cited by 263
Adaptive prognostics for rolling element bearing condition
Li, Y., Billington, S. A., Zhang, C., Kurfess, T. R., Danyluk, S., & Liang, S. Y. (1999) · Mechanical Systems and Signal Processing · doi:10.1006/mssp.1998.0183 · Cited by 244
Saxena, A., & Saad, A. (2007) · Applied Soft Computing · doi:10.1016/j.asoc.2005.10.001 · Cited by 215
STOCHASTIC PROGNOSTICS FOR ROLLING ELEMENT BEARINGS
LI, Y., KURFESS, T. R., & LIANG, S. Y. (2000) · Mechanical Systems and Signal Processing · doi:10.1006/mssp.2000.1301 · Cited by 213
Calculation of Stribeck curves for line contacts
Gelinck, E. R. M., & Schipper, D. J. (2000) · Tribology International · doi:10.1016/s0301-679x(00)00024-4 · Cited by 205
Tang, B., Song, T., Li, F., & Deng, L. (2014) · Renewable Energy · doi:10.1016/j.renene.2013.06.025 · Cited by 186
Stochastic modeling of fatigue crack dynamics for on-line failure prognostics
Ray, A., & Tangirala, S. (1996) · IEEE Transactions on Control Systems Technology · doi:10.1109/87.508893 · Cited by 179
Application of acoustic emission technique for the detection of defects in rolling element bearings
Choudhury, A., & Tandon, N. (2000) · Tribology International · doi:10.1016/s0301-679x(00)00012-8 · Cited by 169
An integrated approach to fault diagnosis of machinery using wear debris and vibration analysis
Peng, Z., & Kessissoglou, N. (2003) · Wear · doi:10.1016/s0043-1648(03)00098-x · Cited by 163
Moosavian, A., Ahmadi, H., Tabatabaeefar, A., & Khazaee, M. (2013) · Shock and Vibration · doi:10.1155/2013/360236 · Cited by 162
DAMAGE MECHANICS APPROACH FOR BEARING LIFETIME PROGNOSTICS
Qiu, J., Seth, B. B., Liang, S. Y., & Zhang, C. (2002) · Mechanical Systems and Signal Processing · doi:10.1006/mssp.2002.1483 · Cited by 160
A Review of Rolling Element Bearing Vibration 'Detection, Diagnosis and Prognosis',
Howard, I. M. (1994) · STIN · Cited by 157
Feng, Z., & Liang, M. (2014) · Renewable Energy · doi:10.1016/j.renene.2013.12.047 · Cited by 148
Rolling contact fatigue and wear fundamentals for rolling bearing diagnostics - state of the art
Halme, J., & Andersson, P. (2009) · Proceedings of the Institution of Mechanical Engineers Part J Journal of Engineering Tribology · doi:10.1243/13506501jet656 · Cited by 133
Sait, A. S., & Sharaf-Eldeen, Y. I. (2011) · Conference proceedings of the Society for Experimental Mechanics · doi:10.1007/978-1-4419-9428-8_25 · Cited by 132
A comparison of filtering approaches for aircraft engine health estimation
Simon, D. (2007) · Aerospace Science and Technology · doi:10.1016/j.ast.2007.06.002 · Cited by 123
A Kalman Filter-Based Ensemble Approach With Application to Turbine Creep Prognostics
Baraldi, P., Mangili, F., & Zio, E. (2012) · IEEE Transactions on Reliability · doi:10.1109/tr.2012.2221037 · Cited by 117
Electrostatic wear monitoring of rolling element bearings
Harvey, T. J., Wood, R. J. K., & Powrie, H. E. G. (2007) · Wear · doi:10.1016/j.wear.2006.12.073 · Cited by 112
Adhesive and abrasive wear studies using acoustic emission techniques
Boness, R. J., & McBride, S. L. (1991) · Wear · doi:10.1016/0043-1648(91)90363-y · Cited by 109
Damage identification for structural health monitoring using fuzzy pattern recognition
Taha, M. R., & Lucero, J. L. (2005) · Engineering Structures · doi:10.1016/j.engstruct.2005.04.018 · Cited by 95
Tan, C. K., & Mba, D. (2004) · Tribology International · doi:10.1016/j.triboint.2004.10.007 · Cited by 94
A model to predict scuffing failures of a ball-on-disk contact
Li, S., Kahraman, A., Anderson, N., et al. (2012) · Tribology International · doi:10.1016/j.triboint.2012.11.007 · Cited by 81
Fatigue crack growth estimation by relevance vector machine
Zio, E., & Maio, F. D. (2012) · Expert Systems with Applications · doi:10.1016/j.eswa.2012.02.199 · Cited by 80
Dynamic Prognostic Prediction of Defect Propagation on Rolling Element Bearings
Li, Y., Billington, S. A., Zhang, C., Kurfess, T. R., Danyluk, S., & Liang, S. Y. (1999) · Tribology Transactions · doi:10.1080/10402009908982232 · Cited by 79
Wu, T.-Y., Chen, J. C., & Wang, C. C. (2012) · Mechanical Systems and Signal Processing · doi:10.1016/j.ymssp.2012.01.022 · Cited by 79
Integrated Vehicle Health Management: Perspectives on an Emerging Field
(2011) · doi:10.4271/r-405 · Cited by 77
Ferreiro, S., Arnáiz, A., Sierra, B., & Irigoien, I. (2011) · Expert Systems with Applications · doi:10.1016/j.eswa.2011.12.027 · Cited by 73
Cube slip and non-Schmid effects in single crystal Ni-base superalloys
Tinga, T., Brekelmans, W. A. M., & Geers, M. G. D. (2009) · Modelling and Simulation in Materials Science and Engineering · doi:10.1088/0965-0393/18/1/015005 · Cited by 72
A fatigue model for contacts under mixed elastohydrodynamic lubrication condition
Li, S., & Kahraman, A. (2010) · International Journal of Fatigue · doi:10.1016/j.ijfatigue.2010.09.021 · Cited by 68
An experimental study and fatigue damage model for fretting fatigue
Walvekar, A. A., Leonard, B. D., Sadeghi, F., Jalalahmadi, B., & Bolander, N. W. (2014) · Tribology International · doi:10.1016/j.triboint.2014.06.006 · Cited by 64
Guo, Y., & SCHWACH, D. (2005) · International Journal of Fatigue · doi:10.1016/j.ijfatigue.2005.03.002 · Cited by 59
Methodological Insights for Online Estimation of Induction Motor Parameters
Laroche, É., Sedda, E., & Durieu, C. (2008) · IEEE Transactions on Control Systems Technology · doi:10.1109/tcst.2007.916317 · Cited by 57
Monitoring extremely slow rolling element bearings: part I
Jamaludin, N., & Mba, D. (2002) · NDT & E International · doi:10.1016/s0963-8695(02)00005-1 · Cited by 54
Price, E. D., Lees, A. W., & Friswell, M. I. (2005) · Proceedings of the Institution of Mechanical Engineers Part J Journal of Engineering Tribology · doi:10.1243/135065005x9817 · Cited by 49
Gupta, M. P., Shringirishi, M. M., & Singh, D. Y. (2013) · INTERNATIONAL JOURNAL OF COMPUTERS & TECHNOLOGY · doi:10.24297/ijct.v5i1.4387 · Cited by 42
Analysis of pressure variations on journal bearing system using artificial neural network
Sınanoğlu, C., Kurban, A. O., & Yıldırım, Ş. (2004) · Industrial Lubrication and Tribology · doi:10.1108/00368790410524038 · Cited by 30
Detecting gear tooth fatigue cracks in advance of complete fracture
Zakrajsek, J. J., & Lewicki, D. G. (1998) · Tribotest · doi:10.1002/tt.3020040407 · Cited by 24
Monitoring extremely slow rolling element bearings: part II
Jamaludin, N., & Mba, D. (2002) · NDT & E International · doi:10.1016/s0963-8695(02)00006-3 · Cited by 22
A fracture mechanics approach to simulate sub-surface initiated fretting wear
Ghosh, A., Paulson, N. R., & Sadeghi, F. (2014) · International Journal of Solids and Structures · doi:10.1016/j.ijsolstr.2014.11.026 · Cited by 21
Sun, X., Tan, J., Wen, Y., & Feng, C. (2016) · Advances in Mechanical Engineering · doi:10.1177/1687814015624834 · Cited by 18
Fan blade crack diagnosis method study
Fu, S., & Gao, Y. (2016) · Advances in Mechanical Engineering · doi:10.1177/1687814016649515 · Cited by 5
Cited by
Machinery health prognostics: A systematic review from data acquisition to RUL prediction
Lei, Y., Li, N., Guo, L., Li, N., Yan, T., & Lin, J. (2018) · Mechanical Systems and Signal Processing · doi:10.1016/j.ymssp.2017.11.016 · Cited by 2,634
“Physics model-based approaches Physics model-based approaches describe degradation processes of machinery through building mathematical models on the basis of the failure mechanisms or the first principle of damage [175].”
MethodA Hybrid Prognostics Approach for Estimating Remaining Useful Life of Rolling Element Bearings
Wang, B., Lei, Y., Li, N., & Li, N. (2020) · IEEE Transactions on Reliability · doi:10.1109/tr.2018.2882682 · Cited by 1,917
Remaining useful lifetime prediction via deep domain adaptation
da Costa, P. R. D. O., Akçay, A., Zhang, Y., & Kaymak, U. (2020) · Reliability Engineering & System Safety · doi:10.1016/j.ress.2019.106682 · Cited by 381
Li, H., Zhang, Z., Li, T., & Si, X. (2024) · Mechanical Systems and Signal Processing · doi:10.1016/j.ymssp.2024.111120 · Cited by 374
Mao, W., He, J., & Zuo, M. J. (2020) · IEEE Transactions on Instrumentation and Measurement · doi:10.1109/tim.2019.2917735 · Cited by 330
Metadata
- Authors
- Cubillo, A., Perinpanayagam, S., & Esperon-Miguez, M.
- Venue
- Advances in Mechanical Engineering
- Publisher
- SAGE Publications
- Published
- 2016-08
- Volume
- 8
- Issue
- 8
- ISSN
- 1687-8132 (ISSN-L)
- 1687-8140
- OpenAlex
- W2516566105
- Cited by
- 292
- References
- 68
- FWCI
- 9.54
- Type
- journal article
- Language
- en
- Open access
- gold
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.