CoChat

Microstructural investigation of the KCl-induced corrosion of the austenitic alloy Sanicro 28 (35Fe27Cr31Ni) at 600°C

Proff, C., Jonsson, T., Pettersson, C., Svensson, J.-E., Johansson, L.-G., Halvarsson, M. · 2009 · Materials at High Temperatures
Cited by 19

The DOI matches its Crossref record; 10 of the 10 references it cites were found in a registry or an index.

Abstract

High-temperature corrosion of stainless steel is important, particularly in bio-fuelled boiler applications. The flue gas is rich in water vapour and alkali salts, which accelerate the corrosion of the boiler material. The focus of this paper is on the breakdown of the protective oxide scale formed on Sanicro 28, which is a highly alloyed austenitic stainless steel (35Fe27Cr31Ni), in the presence of KCl(s). Laboratory exposures were carried out at 600°C in 5% O2+40% H2O for 1, 24 and 168 hours. The samples were coated with 0.10 mg/cm2 KCl prior to exposure and uncoated samples were exposed for reference. The aim was to link the observed mass gains and microstructure to oxidation mechanisms. The oxidized samples were analyzed by XRD, SEM/EDX, FIB and TEM/EDX. The exposures results in a very complex corrosion chemistry, including, e.g. the formation of potassium chromate and the rapid transport of iron species on the surface resulting in accumulation of oxide on the former KCl particles. However, the consumption of chromium and the presence of chloride on the surface does not result in the breakdown of the protective oxide. The ability of the alloy to withstand this harsh environment is tentatively attributed to the high Cr/Fe ratio.

Overview

The claims and statistics of this paper haven’t been checked yet.

Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.

A few free checks a day · papers already verified open instantly · results are public

Integrity signals

Registry

Crossref · 10.1179/096034009x464339

Cites

10 of 10 references verified0 citation errors · 0 not checkable

Statistics

Verification

Claims the paper makes

The claims and statistics of this paper haven’t been checked yet.

Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.

A few free checks a day · papers already verified open instantly · results are public

Self-check

Percentages, sums and reported differences re-computed from the paper’s own numbers.

The self-check needs the paper’s full text.

Citations

Cites

Show all 10 references

Cited by

See all 19

Metadata

Authors
Proff, C., Jonsson, T., Pettersson, C., Svensson, J.-E., Johansson, L.-G., & Halvarsson, M.
Venue
Materials at High Temperatures
Published
2009-01
Volume
26
Issue
2
Pages
113-125
ISSN
  • 0960-3409 (ISSN-L)
  • 1878-6413
OpenAlex
W2028361663
Cited by
19
References
10
FWCI
2.58
Type
journal article
Language
en
Open access
closed

About these checks

Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.

Statistics and arithmetic are recomputed, not judged.

Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.

What counts as a claim ›How we measure confidence ›How we check this ›

Are you an author, or do you see a problem with this page? Request a review

How to cite

Cite CoChat for the checks on this page, and the paper for its own findings.

This page
CoChat. (2026). Citation check: Microstructural investigation of the KCl-induced corrosion of the austenitic alloy Sanicro 28 (35Fe27Cr31Ni) at 600°C. https://app.cochat.ai/papers/10.1179/096034009x464339
The paper
Proff, C., Jonsson, T., Pettersson, C., Svensson, J.-E., Johansson, L.-G., & Halvarsson, M. (2009). Microstructural investigation of the KCl-induced corrosion of the austenitic alloy Sanicro 28 (35Fe27Cr31Ni) at 600°C. Materials at High Temperatures. https://doi.org/10.1179/096034009x464339

Data sources

Bibliographic data: Semantic Scholar, OpenAlex, Crossref.

Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).

Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.