The DOI matches its Crossref record; 48 of the 48 references it cites were found in a registry or an index.
Laser material processing
Abstract
Light amplification by stimulated emission of radiation (laser) is a coherent and monochromatic source of electromagnetic radiation that can propagate in a straight line with negligible divergence. As a result, laser finds diverse applications ranging from mere mundane to most sophisticated uses either for totally commercial or purely scientific purposes, and from life saving to life threatening causes. High power lasers can produce intense heating and perform various manufacturing operations or material processing. The present contribution provides an overview of the application of high power laser only for material processing in engineering applications, and intentionally excludes the scope of application of laser in metrology, biomedical technology, spectroscopy, etc. The manufacturing processes covered have been broadly divided into four major categories, namely, laser assisted forming, joining, machining and surface engineering. Besides discussing the scope and principle of these processes, each section enumerates a detailed update of literature, scientific issues and technological innovations. At the beginning, a brief introduction to different types of lasers and their general applications, fundamentals of laser–matter interaction and classification of laser material processing has been provided. The entire discussion primarily focuses on correlating the properties with processing parameters and microstructure and composition of the material.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Stimulated Optical Radiation in Ruby
MAIMAN, T. H. (1960) · Nature · doi:10.1038/187493a0 · Cited by 5,121
Physical study of laser-produced plasma in confined geometry
Fabbro, R., Fournier, J., Ballard, P., Devaux, D., & Virmont, J. (1990) · Journal of Applied Physics · doi:10.1063/1.346783 · Cited by 1,524
Steen, W. M. (2003) · Springer eBooks · doi:10.1007/978-1-4471-3752-8 · Cited by 581
Metallic foams: their production, properties and applications
Davies, G. J., & Zhen, S. (1983) · Journal of Materials Science · doi:10.1007/bf00554981 · Cited by 561
Physical processes in fusion welding
DebRoy, T., & David, S. A. (1995) · Reviews of Modern Physics · doi:10.1103/revmodphys.67.85 · Cited by 559
Ultrashort-pulse laser machining of dielectric materials
Perry, M. D., Stuart, B. C., Banks, P. S., Feit, M. D., Yanovsky, V., & Rubenchik, A. M. (1999) · Journal of Applied Physics · doi:10.1063/1.370197 · Cited by 503
Schubert, E., Klassen, M., Zerner, I., Walz, C., & Sepold, G. (2001) · Journal of Materials Processing Technology · doi:10.1016/s0924-0136(01)00756-7 · Cited by 497
Machining of sub-micron holes using a femtosecond laser at 800 nm
Pronko, P. P., Dutta, S. K., Squier, J., Rudd, J. V., Du, D., & Mourou, G. (1995) · Optics Communications · doi:10.1016/0030-4018(94)00585-i · Cited by 487
Mai, T. A., & Spowage, A. C. (2004) · Materials Science and Engineering: A · doi:10.1016/j.msea.2004.02.025 · Cited by 385
Simchi, A., & Pohl, H. (2003) · Materials Science and Engineering: A · doi:10.1016/s0921-5093(03)00341-1 · Cited by 377
Cited by
Additive manufacturing: technology, applications and research needs
Guo, N., & Leu, M. C. (2013) · Frontiers of Mechanical Engineering · doi:10.1007/s11465-013-0248-8 · Cited by 2,073
Surface roughness analysis, modelling and prediction in selective laser melting
Strano, G., Hao, L., Everson, R. M., & Evans, K. E. (2013) · Journal of Materials Processing Technology · doi:10.1016/j.jmatprotec.2012.11.011 · Cited by 876
AlMangour, B., Grzesiak, D., & Jenn-MingYang (2016) · Materials & Design · doi:10.1016/j.matdes.2016.05.018 · Cited by 321
Basics of laser powder bed fusion
Yadroitsev, I., Yadroitsava, I., & Du Plessis, A. (2021) · Fundamentals of Laser Powder Bed Fusion of Metals · doi:10.1016/b978-0-12-824090-8.00024-x · Cited by 183
Caprio, L., Demir, A. G., Previtali, B., & Colosimo, B. M. (2020) · Additive Manufacturing · doi:10.1016/j.addma.2019.101029 · Cited by 85
Metadata
- Authors
- Dutta Majumdar, J., & Manna, I.
- Venue
- International Materials Reviews
- Publisher
- SAGE Publications
- Published
- 2011-11
- Volume
- 56
- Issue
- 5-6
- Pages
- 341-388
- ISSN
- 0950-6608 (ISSN-L)
- 1743-2804
- OpenAlex
- W4211113410
- Cited by
- 595
- References
- 48
- FWCI
- 23.87
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: Laser material processing. https://app.cochat.ai/papers/10.1179/1743280411y.0000000003
- The paper
- Dutta Majumdar, J., & Manna, I. (2011). Laser material processing. International Materials Reviews. https://doi.org/10.1179/1743280411y.0000000003
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.