CoChat

TIGAR2: sensitive and accurate estimation of transcript isoform expression with longer RNA-Seq reads

Open access
Nariai, Naoki, Kojima, Kaname, Mimori, Takahiro, Sato, Yukuto, Kawai, Yosuke, Yamaguchi-Kabata, Yumi, Nagasaki, Masao · 2014 · BMC Genomics

The DOI matches its Crossref record; 23 of the 23 references it cites were found in a registry or an index.

Abstract

BACKGROUND: High-throughput RNA sequencing (RNA-Seq) enables quantification and identification of transcripts at single-base resolution. Recently, longer sequence reads become available thanks to the development of new types of sequencing technologies as well as improvements in chemical reagents for the Next Generation Sequencers. Although several computational methods have been proposed for quantifying gene expression levels from RNA-Seq data, they are not sufficiently optimized for longer reads (e.g. >250 bp). RESULTS: We propose TIGAR2, a statistical method for quantifying transcript isoforms from fixed and variable length RNA-Seq data. Our method models substitution, deletion, and insertion errors of sequencers based on gapped-alignments of reads to the reference cDNA sequences so that sensitive read-aligners such as Bowtie2 and BWA-MEM are effectively incorporated in our pipeline. Also, a heuristic algorithm is implemented in variational Bayesian inference for faster computation. We apply TIGAR2 to both simulation data and real data of human samples and evaluate performance of transcript quantification with TIGAR2 in comparison to existing methods. CONCLUSIONS: TIGAR2 is a sensitive and accurate tool for quantifying transcript isoform abundances from RNA-Seq data. Our method performs better than existing methods for the fixed-length reads (100 bp, 250 bp, 500 bp, and 1000 bp of both single-end and paired-end) and variable-length reads, especially for reads longer than 250 bp.

Overview

The claims and statistics of this paper haven’t been checked yet.

Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.

A few free checks a day · papers already verified open instantly · results are public

Integrity signals

Registry

Crossref · 10.1186/1471-2164-15-s10-s5

Cites

23 of 23 references verified0 citation errors · 0 not checkable

Statistics

Figures

Figure 1 The TIGAR2 pipeline. The schematic diagram shows a typical workflow of running TIGAR2 software. Alignment tools such as Bowtie2 take two input files, read data in FASTQ format and cDNA reference sequences in FASTA format. After reads are aligned to the cDNA sequence, the generated BAM file and the reference FASTA file are used in TIGAR2 for estimating transcript isoform abundances and calculating FPKMs.
Figure 1 The TIGAR2 pipeline. The schematic diagram shows a typical workflow of running TIGAR2 software. Alignment tools such as Bowtie2 take two input files, read data in FASTQ format and cDNA reference sequences in FASTA format. After reads are aligned to the cDNA sequence, the generated BAM file and the reference FASTA file are used in TIGAR2 for estimating transcript isoform abundances and calculating FPKMs.CC BY · PubMed Central
Figure 2 The generative model for RNA-Seq data in TIGAR2. The transcript isoform abundance parameter, indicator variable for transcript isoform choice, nucleotide sequence of the first and second pair read n are represented by θ, Znt,Rn¹, and Rn², respectively.
Figure 2 The generative model for RNA-Seq data in TIGAR2. The transcript isoform abundance parameter, indicator variable for transcript isoform choice, nucleotide sequence of the first and second pair read n are represented by θ, Znt,Rn¹, and Rn², respectively.CC BY · PubMed Central
Figure 3 Estimated read length distribution from the Ion Torrent PGM RNA-Seq data. From the histogram of variable read lengths, the smoothly fitted probability distribution is constructed from a linear combination of 20 equally spaced Gaussian distributions(standard deviations are set to 20 bp) that minimizes the least squares error of the estimate.
Figure 3 Estimated read length distribution from the Ion Torrent PGM RNA-Seq data. From the histogram of variable read lengths, the smoothly fitted probability distribution is constructed from a linear combination of 20 equally spaced Gaussian distributions(standard deviations are set to 20 bp) that minimizes the least squares error of the estimate.CC BY · PubMed Central
Figure 4 Performance evaluation with TIGAR2, TIGAR1, RSEM, and Cufflinks using single-end and variable lengths simulation data. Root mean square errors of the predicted transcript isoform abundances with each method against the true gene expression levels are shown for 100 bp, 250 bp, 500 bp, and 1,000 bp single-end, and variable-length simulation data. Because RSEM did not produce predictions for 1,000 bp single-end reads, errors were calculated assuming abundances were estimated as zero for all isoforms.
Figure 4 Performance evaluation with TIGAR2, TIGAR1, RSEM, and Cufflinks using single-end and variable lengths simulation data. Root mean square errors of the predicted transcript isoform abundances with each method against the true gene expression levels are shown for 100 bp, 250 bp, 500 bp, and 1,000 bp single-end, and variable-length simulation data. Because RSEM did not produce predictions for 1,000 bp single-end reads, errors were calculated assuming abundances were estimated as zero for all isoforms.CC BY · PubMed Central
Figure 5 Performance evaluation with TIGAR2, TIGAR1, RSEM, and Cufflinks using paired-end simulation data. Root mean square errors of the predicted transcript isoform abundances with each method against the true gene expression levels are shown for 100 bp, 250 bp, 500 bp, and 1,000 bp paired-end simulation data. Because RSEM and TopHat-Cufflinks did not produce predictions for 500 bp and 1,000 bp paired-end reads, errors were calculated assuming abundances were estimated as zero for all isoforms.
Figure 5 Performance evaluation with TIGAR2, TIGAR1, RSEM, and Cufflinks using paired-end simulation data. Root mean square errors of the predicted transcript isoform abundances with each method against the true gene expression levels are shown for 100 bp, 250 bp, 500 bp, and 1,000 bp paired-end simulation data. Because RSEM and TopHat-Cufflinks did not produce predictions for 500 bp and 1,000 bp paired-end reads, errors were calculated assuming abundances were estimated as zero for all isoforms.CC BY · PubMed Central
Figure 6 Correlation of gene expression levels estimated from technical replicates. Scatter plots of gene expression levels estimated from technical replicates produced from the Ion Torrent PGM RNA-Seq data. The Pearson correlation coefficients are calculated and shown on each plot. Predictions with TIGAR2 were most consistent among technical replicates.
Figure 6 Correlation of gene expression levels estimated from technical replicates. Scatter plots of gene expression levels estimated from technical replicates produced from the Ion Torrent PGM RNA-Seq data. The Pearson correlation coefficients are calculated and shown on each plot. Predictions with TIGAR2 were most consistent among technical replicates.CC BY · PubMed Central
Figure 7 Visualization of the optimized read alignment. Read alignment on NM_001139441, which is an isoform of BAP31, is visualized by IGV. The top track shows the read alignment by Bowtie2, and the bottom track shows the optimized read alignment with TIGAR2. It became easier to identify possible sequencing errors from genetic variants by optimization with TIGAR2 (red circles).
Figure 7 Visualization of the optimized read alignment. Read alignment on NM_001139441, which is an isoform of BAP31, is visualized by IGV. The top track shows the read alignment by Bowtie2, and the bottom track shows the optimized read alignment with TIGAR2. It became easier to identify possible sequencing errors from genetic variants by optimization with TIGAR2 (red circles).CC BY · PubMed Central

Verification

Claims the paper makes

The claims and statistics of this paper haven’t been checked yet.

Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.

A few free checks a day · papers already verified open instantly · results are public

Claims other papers make about this one

Each is checked against this paper’s own text: does it say what the citing paper says it does?

Self-check

Percentages, sums and reported differences re-computed from the paper’s own numbers.

The self-check needs the paper’s full text.

Citations

Cites

Show all 23 references

Cited by

See all 51

Metadata

Authors
Nariai, N., Kojima, K., Mimori, T., Sato, Y., Kawai, Y., Yamaguchi-Kabata, Y., & Nagasaki, M.
Affiliations
Tohoku University (JP)
Corresponding author
  • Nariai, Naoki
  • Nagasaki, Masao
Venue
BMC Genomics
Published
2014-12
Volume
15
Issue
S10
Pages
S5-S5
ISSN
1471-2164 (ISSN-L)
OpenAlex
W2022097310
Cited by
51
References
23
Citations by year
2025: 1 · 2024: 4 · 2022: 2 · 2021: 6 · 2020: 10 · 2018: 5 · 2017: 9 · 2016: 10 · 2015: 3 · 2014: 1
FWCI
3.28
Type
journal article
Language
en
Open access
Licence
cc-by
Locations
  • BMC Genomics (publishedVersion, cc-by)
  • Europe PMC (PubMed Central) (publishedVersion, cc-by)
  • PubMed Central (publishedVersion, cc-by)
  • PubMed (publishedVersion)
Funders
  • Ministry of Education, Culture, Sports, Science and Technology (CREST)
  • Core Research for Evolutional Science and Technology
Topics
  • Life Sciences › Biochemistry, Genetics and Molecular Biology › Molecular Biology › Genomics and Phylogenetic Studies
  • Life Sciences › Biochemistry, Genetics and Molecular Biology › Molecular Biology › Single-cell and spatial transcriptomics
  • Life Sciences › Biochemistry, Genetics and Molecular Biology › Molecular Biology › Gene expression and cancer classification
Keywords
RNA-seq, long reads, gapped alignment, variational inference, gene expression estimation
MeSH terms
Algorithms, Bayes Theorem, HeLa Cells, Humans, RNA, Messenger, Software, Genetic Variation, Sequence Analysis, RNA, Computational Biology, Gene Expression Profiling, RNA Isoforms

About these checks

Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.

Statistics and arithmetic are recomputed, not judged.

Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.

What counts as a claim ›How we measure confidence ›How we check this ›

Are you an author, or do you see a problem with this page? Request a review

How to cite

Cite CoChat for the checks on this page, and the paper for its own findings.

This page
CoChat. (2026). Citation check: TIGAR2: sensitive and accurate estimation of transcript isoform expression with longer RNA-Seq reads. https://app.cochat.ai/papers/10.1186/1471-2164-15-s10-s5
The paper
Nariai, N., Kojima, K., Mimori, T., Sato, Y., Kawai, Y., Yamaguchi-Kabata, Y., & Nagasaki, M. (2014). TIGAR2: sensitive and accurate estimation of transcript isoform expression with longer RNA-Seq reads. BMC Genomics. https://doi.org/10.1186/1471-2164-15-s10-s5

Data sources

Bibliographic data: Semantic Scholar, OpenAlex, Crossref.

Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).

Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.