The DOI matches its Crossref record; 45 of the 45 references it cites were found in a registry or an index.
Metal additive-manufacturing process and residual stress modeling
Open accessAbstract
Additive manufacturing (AM), widely known as 3D printing, is a direct digital manufacturing process, where a component can be produced layer by layer from 3D digital data with no or minimal use of machining, molding, or casting. AM has developed rapidly in the last 10 years and has demonstrated significant potential in cost reduction of performance-critical components. This can be realized through improved design freedom, reduced material waste, and reduced post processing steps. Modeling AM processes not only provides important insight in competing physical phenomena that lead to final material properties and product quality but also provides the means to exploit the design space towards functional products and materials. The length- and timescales required to model AM processes and to predict the final workpiece characteristics are very challenging. Models must span length scales resolving powder particle diameters, the build chamber dimensions, and several hundreds or thousands of meters of heat source trajectories. Depending on the scan speed, the heat source interaction time with feedstock can be as short as a few microseconds, whereas the build time can span several hours or days depending on the size of the workpiece and the AM process used. Models also have to deal with multiple physical aspects such as heat transfer and phase changes as well as the evolution of the material properties and residual stresses throughout the build time. The modeling task is therefore a multi-scale, multi-physics endeavor calling for a complex interaction of multiple algorithms. This paper discusses models required to span the scope of AM processes with a particular focus towards predicting as-built material characteristics and residual stresses of the final build. Verification and validation examples are presented, the over-spanning goal is to provide an overview of currently available modeling tools and how they can contribute to maturing additive manufacturing.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Numerical Heat Transfer and Fluid Flow
Patankar, S. V. (2018) · CRC Press eBooks · doi:10.1201/9781482234213 · Cited by 23,360
A discrete numerical model for granular assemblies
Cundall, P. A., & Strack, O. D. L. (1979) · Géotechnique · doi:10.1680/geot.1979.29.1.47 · Cited by 17,527
Volume of fluid (VOF) method for the dynamics of free boundaries
Hirt, C. W., & Nichols, B. D. (1981) · Journal of Computational Physics · doi:10.1016/0021-9991(81)90145-5 · Cited by 16,105
Numerical Heat Transfer and Fluid Flow
Hsu, C.-J. (1981) · Nuclear Science and Engineering · doi:10.13182/nse81-a20112 · Cited by 15,125
Generating optimal topologies in structural design using a homogenization method
Bendsøe, M. P., & Kikuchi, N. (1988) · Computer Methods in Applied Mechanics and Engineering · doi:10.1016/0045-7825(88)90086-2 · Cited by 7,467
LATTICE BOLTZMANN METHOD FOR FLUID FLOWS
Chen, S., & Doolen, G. D. (1998) · Annual Review of Fluid Mechanics · doi:10.1146/annurev.fluid.30.1.329 · Cited by 7,314
A new finite element model for welding heat sources
Goldak, J., Chakravarti, A., & Bibby, M. (1984) · Metallurgical Transactions B · doi:10.1007/bf02667333 · Cited by 3,374
Multiphase Flows with Droplets and Particles
Crowe, C. T., Schwarzkopf, J. D., Sommerfeld, M., & Tsuji, Y. (2011) · doi:10.1201/b11103 · Cited by 3,076
Laser Processing and Chemistry
Bäuerle, D. (1996) · Springer eBooks · doi:10.1007/978-3-662-03253-4 · Cited by 2,196
(2006) · A-to-Z Guide to Thermodynamics, Heat and Mass Transfer, and Fluids Engineering · doi:10.1615/atoz.e.evaofdrop · Cited by 2,132
Cited by
Process defects and in situ monitoring methods in metal powder bed fusion: a review
Grasso, M., & Colosimo, B. M. (2017) · Measurement Science and Technology · doi:10.1088/1361-6501/aa5c4f · Cited by 833
Paolini, A., Kollmannsberger, S., & Rank, E. (2019) · Additive Manufacturing · doi:10.1016/j.addma.2019.100894 · Cited by 673
Metal additive manufacturing in the commercial aviation industry: A review
Gisario, A., Kazarian, M., Martina, F., & Mehrpouya, M. (2019) · Journal of Manufacturing Systems · doi:10.1016/j.jmsy.2019.08.005 · Cited by 574
Multi-scale defects in powder-based additively manufactured metals and alloys
Fu, J., Li, H., Song, X., & Fu, M. W. (2022) · Journal of Materials Science & Technology · doi:10.1016/j.jmst.2022.02.015 · Cited by 391
Meier, C., Weissbach, R., Weinberg, J., Wall, W. A., & Hart, A. J. (2019) · Journal of Materials Processing Technology · doi:10.1016/j.jmatprotec.2018.10.037 · Cited by 298
Metadata
- Authors
- Megahed, M., Mindt, H.-W., N’Dri, N., Duan, H., & Desmaison, O.
- Venue
- Integrating Materials and Manufacturing Innovation
- Published
- 2016-02-24
- Volume
- 5
- Issue
- 1
- Pages
- 61-93
- ISSN
- 2193-9764 (ISSN-L)
- 2193-9772
- OpenAlex
- W2292222952
- Cited by
- 305
- References
- 45
- FWCI
- 22.72
- Type
- journal article
- Language
- en
- Open access
- hybrid
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: Metal additive-manufacturing process and residual stress modeling. https://app.cochat.ai/papers/10.1186/s40192-016-0047-2
- The paper
- Megahed, M., Mindt, H.-W., N’Dri, N., Duan, H., & Desmaison, O. (2016). Metal additive-manufacturing process and residual stress modeling. Integrating Materials and Manufacturing Innovation. https://doi.org/10.1186/s40192-016-0047-2
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.