Metal additive-manufacturing process and residual stress modeling
Open accessThe DOI matches its Crossref record; 45 of the 45 references it cites were found in a registry or an index.
Abstract
Additive manufacturing (AM), widely known as 3D printing, is a direct digital manufacturing process, where a component can be produced layer by layer from 3D digital data with no or minimal use of machining, molding, or casting. AM has developed rapidly in the last 10 years and has demonstrated significant potential in cost reduction of performance-critical components. This can be realized through improved design freedom, reduced material waste, and reduced post processing steps. Modeling AM processes not only provides important insight in competing physical phenomena that lead to final material properties and product quality but also provides the means to exploit the design space towards functional products and materials. The length- and timescales required to model AM processes and to predict the final workpiece characteristics are very challenging. Models must span length scales resolving powder particle diameters, the build chamber dimensions, and several hundreds or thousands of meters of heat source trajectories. Depending on the scan speed, the heat source interaction time with feedstock can be as short as a few microseconds, whereas the build time can span several hours or days depending on the size of the workpiece and the AM process used. Models also have to deal with multiple physical aspects such as heat transfer and phase changes as well as the evolution of the material properties and residual stresses throughout the build time. The modeling task is therefore a multi-scale, multi-physics endeavor calling for a complex interaction of multiple algorithms. This paper discusses models required to span the scope of AM processes with a particular focus towards predicting as-built material characteristics and residual stresses of the final build. Verification and validation examples are presented, the over-spanning goal is to provide an overview of currently available modeling tools and how they can contribute to maturing additive manufacturing.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Numerical Heat Transfer and Fluid Flow
Patankar, S. V. (2018) · CRC Press eBooks · doi:10.1201/9781482234213 · Cited by 23,360
A discrete numerical model for granular assemblies
Cundall, P. A., & Strack, O. D. L. (1979) · Géotechnique · doi:10.1680/geot.1979.29.1.47 · Cited by 17,527
Volume of fluid (VOF) method for the dynamics of free boundaries
Hirt, C. W., & Nichols, B. D. (1981) · Journal of Computational Physics · doi:10.1016/0021-9991(81)90145-5 · Cited by 16,105
Numerical Heat Transfer and Fluid Flow
Hsu, C.-J. (1981) · Nuclear Science and Engineering · doi:10.13182/nse81-a20112 · Cited by 15,125
Generating optimal topologies in structural design using a homogenization method
Bendsøe, M. P., & Kikuchi, N. (1988) · Computer Methods in Applied Mechanics and Engineering · doi:10.1016/0045-7825(88)90086-2 · Cited by 7,467
LATTICE BOLTZMANN METHOD FOR FLUID FLOWS
Chen, S., & Doolen, G. D. (1998) · Annual Review of Fluid Mechanics · doi:10.1146/annurev.fluid.30.1.329 · Cited by 7,314
A new finite element model for welding heat sources
Goldak, J., Chakravarti, A., & Bibby, M. (1984) · Metallurgical Transactions B · doi:10.1007/bf02667333 · Cited by 3,374
Multiphase Flows with Droplets and Particles
Crowe, C. T., Schwarzkopf, J. D., Sommerfeld, M., & Tsuji, Y. (2011) · doi:10.1201/b11103 · Cited by 3,076
Laser Processing and Chemistry
Bäuerle, D. (1996) · Springer eBooks · doi:10.1007/978-3-662-03253-4 · Cited by 2,196
(2006) · A-to-Z Guide to Thermodynamics, Heat and Mass Transfer, and Fluids Engineering · doi:10.1615/atoz.e.evaofdrop · Cited by 2,132
Reaction Kinetics in Processes of Nucleation and Growth
Johnson, W. (1939) · Medical Entomology and Zoology · Cited by 1,682
King, W. E., Anderson, A. T., Ferencz, R. M., Hodge, N. E., Kamath, C., Khairallah, S. A., & Rubenchik, A. M. (2015) · Applied Physics Reviews · doi:10.1063/1.4937809 · Cited by 1,258
Qiu, C., Panwisawas, C., Ward, R., Basoalto, H., Brooks, J. W., & Attallah, M. M. (2015) · Acta Materialia · doi:10.1016/j.actamat.2015.06.004 · Cited by 1,041
Multiphase Flows with Droplets and Particles
Naterer, G. F. (2021) · CRC Press eBooks · doi:10.1201/9781003206125-6 · Cited by 1,010
Dinda, G. P., Dasgupta, A. K., & Mazumder, J. (2009) · Materials Science and Engineering: A · doi:10.1016/j.msea.2009.01.009 · Cited by 858
Laser Processing and Chemistry
Bäuerle, D. (2011) · Springer eBooks · doi:10.1007/978-3-642-17613-5 · Cited by 843
A priori derivation of the lattice Boltzmann equation
He, X., & Luo, L.-S. (1997) · Physical Review E · doi:10.1103/physreve.55.r6333 · Cited by 816
Roberts, I. A., Wang, C., Esterlein, R., Stanford, M., & Mynors, D. J. (2009) · International Journal of Machine Tools and Manufacture · doi:10.1016/j.ijmachtools.2009.07.004 · Cited by 796
Hussein, A., Hao, L., Yan, C., & Everson, R. (2013) · Materials & Design (1980-2015) · doi:10.1016/j.matdes.2013.05.070 · Cited by 706
Ding, J., Colegrove, P., Mehnen, J., Ganguly, S., Sequeira Almeida, P. M., Wang, F., & Williams, S. (2011) · Computational Materials Science · doi:10.1016/j.commatsci.2011.06.023 · Cited by 689
Modeling metal deposition in heat transfer analyses of additive manufacturing processes
Michaleris, P. (2014) · Finite Elements in Analysis and Design · doi:10.1016/j.finel.2014.04.003 · Cited by 527
Murr, L. E., Martinez, E., Amato, K. N., Gaytan, S. M., Hernandez, J., Ramirez, D. A., Shindo, P. W., Medina, F., & Wicker, R. B. (2012) · Journal of Materials Research and Technology · doi:10.1016/s2238-7854(12)70009-1 · Cited by 470
Mesoscopic simulation of selective beam melting processes
Körner, C., Attar, E., & Heinl, P. (2011) · Journal of Materials Processing Technology · doi:10.1016/j.jmatprotec.2010.12.016 · Cited by 450
Heigel, J. C., Michaleris, P., & Reutzel, E. W. (2015) · Additive Manufacturing · doi:10.1016/j.addma.2014.10.003 · Cited by 438
Sintering of commercially pure titanium powder with a Nd:YAG laser source
Fischer, P., Romano, V., Weber, H. P., Karapatis, N. P., Boillat, É., & Glardon, R. (2003) · Acta Materialia · doi:10.1016/s1359-6454(02)00567-0 · Cited by 408
Szost, B. A., Terzi, S., Martina, F., Boisselier, D., Prytuliak, A., Pirling, T., Hofmann, M., & Jarvis, D. J. (2016) · Materials & Design · doi:10.1016/j.matdes.2015.09.115 · Cited by 393
Calculation of laser absorption by metal powders in additive manufacturing
Boley, C. D., Khairallah, S. A., & Rubenchik, A. M. (2015) · Applied Optics · doi:10.1364/ao.54.002477 · Cited by 371
Thermomechanical Modeling of Additive Manufacturing Large Parts
Denlinger, E. R., Irwin, J., & Michaleris, P. (2014) · Journal of Manufacturing Science and Engineering · doi:10.1115/1.4028669 · Cited by 345
Fundamental consolidation mechanisms during selective beam melting of powders
Körner, C., Bauereiß, A., & Attar, E. (2013) · Modelling and Simulation in Materials Science and Engineering · doi:10.1088/0965-0393/21/8/085011 · Cited by 323
Residual stress and distortion modeling of electron beam direct manufacturing Ti-6Al-4V
Denlinger, E. R., Heigel, J. C., & Michaleris, P. (2015) · Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture · doi:10.1177/0954405414539494 · Cited by 263
Young’s modulus and volume porosity relationships for additive manufacturing applications
Choren, J. A., Heinrich, S. M., & Silver-Thorn, M. B. (2013) · Journal of Materials Science · doi:10.1007/s10853-013-7237-5 · Cited by 208
Density of Additively-Manufactured, 316L SS Parts Using Laser Powder-Bed Fusion at Powers Up to 400W
Lawrence Livermore National Lab. (LLNL), L., Kamath, C., USDOE, El-dasher, B., Gallegos, G., King, W. E., & Sisto, A. (2013) · doi:10.2172/1116929 · Cited by 207
The role of process variables in laser-based direct metal solid freeform fabrication
Beuth, J., & Klingbeil, N. (2001) · JOM · doi:10.1007/s11837-001-0067-y · Cited by 180
Pinkerton, A. J. (2007) · Journal of Physics D Applied Physics · doi:10.1088/0022-3727/40/23/012 · Cited by 165
Powder Bed Layer Characteristics: The Overseen First-Order Process Input
Mindt, H.-W., Megahed, M., Lavery, N., Holmes, M. A., & Brown, S. G. R. (2016) · Metallurgical and Materials Transactions A · doi:10.1007/s11661-016-3470-2 · Cited by 154
Self-citationBi, G., Sun, C., Chen, H.-C., Ng, F. L., & Khin, C. C. (2014) · Materials & Design (1980-2015) · doi:10.1016/j.matdes.2014.04.020 · Cited by 135
Martukanitz, R. P., Michaleris, P., Palmer, T. A., DebRoy, T., Liu, Z., Otis, R., Heo, T. W., & Chen, L. (2014) · Additive manufacturing · doi:10.1016/j.addma.2014.09.002 · Cited by 123
Direct manufacturing of 3D objects by selective laser melting of metal powders
Yadroitsau, I. (2008) · OpenGrey (Institut de l'Information Scientifique et Technique) · Cited by 102
Laser Repair of Superalloy Single Crystals with Varying Substrate Orientations
Mokadem, S., Bezençon, C., Hauert, A., Jacot, A., & Kurz, W. (2007) · Metallurgical and Materials Transactions A · doi:10.1007/s11661-007-9172-z · Cited by 98
Papadakis, L., Loizou, A., Risse, J., Bremen, S., & Schrage, J. (2014) · Virtual and Physical Prototyping · doi:10.1080/17452759.2013.868005 · Cited by 89
Fast Prediction and Validation of Part Distortion in Selective Laser Melting
Li, C., Fu, C. H., Guo, Y. B., & Fang, F. (2015) · Procedia Manufacturing · doi:10.1016/j.promfg.2015.09.042 · Cited by 76
Li, J., Wang, H. M., & Tang, H. (2012) · Materials Science and Engineering A · doi:10.1016/j.msea.2012.04.037 · Cited by 75
Casting constraints in structural optimization via a level-set method
Allaire, G., Jouve, F., & Michailidis, G. (2013) · HAL · Cited by 39
Li, P., Warner, D. H., Fatemi, A., & Phan, N. (2016) · AIAA/ASME/ASCE/AHS/ASC Structures, Structural Dynamics, and Materials Conference (SDM) · doi:10.2514/6.2016-1656 · Cited by 21
Solidification macroprocesses - Thermal-mechanical Modeling of Stress, Distortion and Hot Tearing)
Bellet, M., & Thomas, B. G. (2007) · HAL · Cited by 2
Cited by
Process defects and in situ monitoring methods in metal powder bed fusion: a review
Grasso, M., & Colosimo, B. M. (2017) · Measurement Science and Technology · doi:10.1088/1361-6501/aa5c4f · Cited by 833
Paolini, A., Kollmannsberger, S., & Rank, E. (2019) · Additive Manufacturing · doi:10.1016/j.addma.2019.100894 · Cited by 673
Metal additive manufacturing in the commercial aviation industry: A review
Gisario, A., Kazarian, M., Martina, F., & Mehrpouya, M. (2019) · Journal of Manufacturing Systems · doi:10.1016/j.jmsy.2019.08.005 · Cited by 574
Multi-scale defects in powder-based additively manufactured metals and alloys
Fu, J., Li, H., Song, X., & Fu, M. W. (2022) · Journal of Materials Science & Technology · doi:10.1016/j.jmst.2022.02.015 · Cited by 391
Meier, C., Weissbach, R., Weinberg, J., Wall, W. A., & Hart, A. J. (2019) · Journal of Materials Processing Technology · doi:10.1016/j.jmatprotec.2018.10.037 · Cited by 298
Metadata
- Authors
- Megahed, M., Mindt, H.-W., N’Dri, N., Duan, H., & Desmaison, O.
- Venue
- Integrating Materials and Manufacturing Innovation
- Published
- 2016-02-24
- Volume
- 5
- Issue
- 1
- Pages
- 61-93
- ISSN
- 2193-9764 (ISSN-L)
- 2193-9772
- OpenAlex
- W2292222952
- Cited by
- 305
- References
- 45
- FWCI
- 22.72
- Type
- journal article
- Language
- en
- Open access
- hybrid
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.