3D printing in medicine of congenital heart diseases
Open accessThe DOI matches its Crossref record; 43 of the 43 references it cites were found in a registry or an index.
Abstract
Congenital heart diseases causing significant hemodynamic and functional consequences require surgical repair. Understanding of the precise surgical anatomy is often challenging and can be inadequate or wrong. Modern high resolution imaging techniques and 3D printing technology allow 3D printing of the replicas of the patient's heart for precise understanding of the complex anatomy, hands-on simulation of surgical and interventional procedures, and morphology teaching of the medical professionals and patients. CT or MR images obtained with ECG-gating and breath-holding or respiration navigation are best suited for 3D printing. 3D echocardiograms are not ideal but can be used for printing limited areas of interest such as cardiac valves and ventricular septum. Although the print materials still require optimization for representation of cardiovascular tissues and valves, the surgeons find the models suitable for practicing closure of the septal defects, application of the baffles within the ventricles, reconstructing the aortic arch, and arterial switch procedure. Hands-on surgical training (HOST) on models may soon become a mandatory component of congenital heart disease surgery program. 3D printing will expand its utilization with further improvement of the use of echocardiographic data and image fusion algorithm across multiple imaging modalities and development of new printing materials. Bioprinting of implants such as stents, patches and artificial valves and tissue engineering of a part of or whole heart using the patient's own cells will open the door to a new era of personalized medicine.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Figures









Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Claims other papers make about this one
Each is checked against this paper’s own text: does it say what the citing paper says it does?
The source backs part of the claim, not all of it — or backs it for a different population, condition or comparison.
In the citing paper
“Models that replicate the geometrically complex structure of the heart, harboring chambers and large vessels with soft biomaterials, can be achieved using 3D bioprinting.”
From In situ expansion, differentiation, and electromechanical coupling of human cardiac muscle in a 3D bioprinted, chambered organoid (2020) · cites this paper as [16]
Experimental — accuracy not yet measuredThe source backs part of the claim, not all of it — or backs it for a different population, condition or comparison.
In the citing paper
“The concept is gaining traction, as the ability to print tissues composed entirely of native proteins, cells and/or biocompatible synthetic components is possible and accessible to many laboratories9–17.”
From In situ expansion, differentiation, and electromechanical coupling of human cardiac muscle in a 3D bioprinted, chambered organoid (2020) · cites this paper as [16]
Experimental — accuracy not yet measured
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Congenital Heart Defects in Europe: Prevalence and Perinatal Mortality, 2000 to 2005
Dolk, H., Loane, M., Garne, E., & a European Surveillance of Congenital Anomalies (EUROCAT) Working Group (2011) · Circulation · doi:10.1161/circulationaha.110.958405 · Cited by 944
Medical 3D Printing for the Radiologist
Mitsouras, D., Liacouras, P., Imanzadeh, A., Giannopoulos, A. A., Cai, T., Kumamaru, K. K., George, E., Wake, N., Caterson, E. J., Pomahac, B., et al. (2015) · RadioGraphics · doi:10.1148/rg.2015140320 · Cited by 619
Cardiac tissue engineering using tissue printing technology and human cardiac progenitor cells
Gaetani, R., Doevendans, P. A., Metz, C. H. G., Alblas, J., Messina, E., Giacomello, A., & Sluijter, J. P. G. (2012) · Biomaterials · doi:10.1016/j.biomaterials.2011.11.003 · Cited by 383
Costello, J. P., Olivieri, L. J., Su, L., Krieger, A., Alfares, F., Thabit, O., Marshall, M. B., Yoo, S.-J., Kim, P. C., Jonas, R. A., et al. (2015) · Congenital Heart Disease · doi:10.1111/chd.12238 · Cited by 241
Self-citationSchievano, S., Migliavacca, F., Coats, L., Khambadkone, S., Carminati, M., Wilson, N., Deanfield, J. E., Bonhoeffer, P., & Taylor, A. M. (2007) · Radiology · doi:10.1148/radiol.2422051994 · Cited by 232
Biglino, G., Capelli, C., Wray, J., Schievano, S., Leaver, L.-K., Khambadkone, S., Giardini, A., Derrick, G., Jones, A., & Taylor, A. M. (2015) · BMJ Open · doi:10.1136/bmjopen-2014-007165 · Cited by 228
Jacobs, S., Grunert, R., Mohr, F. W., & Falk, V. (2008) · Interactive CardioVascular and Thoracic Surgery · doi:10.1510/icvts.2007.156588 · Cited by 206
Rapid Prototyping: A New Tool in Understanding and Treating Structural Heart Disease
Kim, M. S., Hansgen, A. R., Wink, O., Quaife, R. A., & Carroll, J. D. (2008) · Circulation · doi:10.1161/circulationaha.107.740977 · Cited by 188
Olivieri, L. J., Krieger, A., Loke, Y.-H., Nath, D. S., Kim, P. C. W., & Sable, C. A. (2015) · Journal of the American Society of Echocardiography · doi:10.1016/j.echo.2014.12.016 · Cited by 182
Current progress in 3D printing for cardiovascular tissue engineering
Mosadegh, B., Xiong, G., Dunham, S., & Min, J. K. (2015) · Biomedical Materials · doi:10.1088/1748-6041/10/3/034002 · Cited by 174
Research works printed but not linked: 2
- Yoo SJ, Thabit O, Lee W, Goo HW, van Arsdell GS (2013) Double outlet right ventricle in your hands. Web publication. https://doi.org/imib-chd.com/wp-content/uploads/morphology/1-dorv-in-your-hands/DORV%20IN%20YOUR%20HANDS%2012%20CASE%20SERIES.pdf .
- Yoo SJ, Thabit O, Lee W, Goo HW, Yim D, Ide H, van Arsdell GS (2015) Most peculiar hearts in your hands. Criss-cross, superoinferior, twisted, topsy-turvy, etc. What do they all mean? Web publication. https://doi.org/imib-chd.com/wp-content/uploads/morphology/2-mph-in-your-hands/MOST%20PECULIAR%20HEARTS%20IN%20YOUR%20HANDS%20Full%20Pages.pdf
Cited by
Applications of 3D printing in cardiovascular diseases
Giannopoulos, A. A., Mitsouras, D., Yoo, S.-J., Liu, P. P., Chatzizisis, Y. S., & Rybicki, F. J. (2016) · Nature Reviews Cardiology · doi:10.1038/nrcardio.2016.170 · Cited by 421
Self-citationKupfer, M. E., Lin, W.-H., Ravikumar, V., Qiu, K., Wang, L., Gao, L., Bhuiyan, D. B., Lenz, M., Ai, J., Mahutga, R. R., et al. (2020) · Circulation Research · doi:10.1161/circresaha.119.316155 · Cited by 329
Hands-on surgical training of congenital heart surgery using 3-dimensional print models
Yoo, S.-J., Spray, T., Austin, E. H., Yun, T.-J., & van Arsdell, G. S. (2017) · The Journal of Thoracic and Cardiovascular Surgery · doi:10.1016/j.jtcvs.2016.12.054 · Cited by 198
Self-citationGoo, H. W., Park, S. J., & Yoo, S.-J. (2020) · Korean Journal of Radiology · doi:10.3348/kjr.2019.0625 · Cited by 176
Self-citationMaintaining safety and efficacy for 3D printing in medicine
Christensen, A. M., & Rybicki, F. J. (2017) · 3D Printing in Medicine · doi:10.1186/s41205-016-0009-5 · Cited by 141
Metadata
- Authors
- Yoo, S.-J., Thabit, O., Kim, E. K., Ide, H., Yim, D., Dragulescu, A., Seed, M., Grosse-Wortmann, L., & van Arsdell, G.
- Affiliations
- University of Toronto (CA)
- Corresponding author
- Yoo, Shi-Joon
- Venue
- 3D Printing in Medicine
- Published
- 2016-12
- Volume
- 2
- Issue
- 1
- Pages
- 3-3
- ISSN
- 2365-6271 (ISSN-L)
- PMC
- PMC6036784
- OpenAlex
- W2530815572
- Cited by
- 181
- References
- 42
- Citations by year
- 2026: 7 · 2025: 17 · 2024: 26 · 2023: 24 · 2022: 24 · 2021: 17 · 2020: 17 · 2019: 14 · 2018: 21 · 2017: 13 · 2016: 1
- FWCI
- 1.17
- Type
- journal article
- Language
- en
- Open access
- gold
- doi.org
- Licence
- cc-by
- creativecommons.org/licenses/by/4.0 (tdm)
- Locations
- 3D Printing in Medicine (publishedVersion, cc-by)
- Europe PMC (PubMed Central) (publishedVersion, cc-by)
- PubMed Central (publishedVersion, cc-by)
- PubMed (publishedVersion)
- TSpace (University of Toronto) (submittedVersion, cc-by)
- DOAJ (DOAJ: Directory of Open Access Journals) (submittedVersion, cc-by-sa)
- Topics
- Physical Sciences › Engineering › Biomedical Engineering › Anatomy and Medical Technology
- Health Sciences › Medicine › Cardiology and Cardiovascular Medicine › Congenital Heart Disease Studies
- Physical Sciences › Engineering › Biomedical Engineering › 3D Printing in Biomedical Research
- Keywords
- 3D printing, congenital heart disease, surgical anatomy, surgical training, patient-specific cardiac models, ECG gating, three-dimensional echocardiography, septal defect closure, aortic arch reconstruction, arterial switch operation, bioprinting, tissue engineering, personalized medicine
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: 3D printing in medicine of congenital heart diseases. https://app.cochat.ai/papers/10.1186/s41205-016-0004-x
- The paper
- Yoo, S.-J., Thabit, O., Kim, E. K., Ide, H., Yim, D., Dragulescu, A., Seed, M., Grosse-Wortmann, L., & van Arsdell, G. (2016). 3D printing in medicine of congenital heart diseases. 3D Printing in Medicine. https://doi.org/10.1186/s41205-016-0004-x
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.