Clinical 3D modeling to guide pediatric cardiothoracic surgery and intervention using 3D printed anatomic models, computer aided design and virtual reality
Open accessThe DOI matches its Crossref record; 25 of the 25 references it cites were found in a registry or an index.
Abstract
Background: Surgical and catheter-based interventions for congenital heart disease require precise understanding of complex anatomy. The use of three-dimensional (3D) printing and virtual reality to enhance visuospatial understanding has been well documented, but integration of these methods into routine clinical practice has not been well described. We review the growth and development of a clinical 3D modeling service to inform procedural planning within a high-volume pediatric heart center. Methods: Clinical 3D modeling was performed using cardiac magnetic resonance (CMR) or computed tomography (CT) derived data. Image segmentation and post-processing was performed using FDA-approved software. Patient-specific anatomy was visualized using 3D printed models, digital flat screen models and virtual reality. Surgical repair options were digitally designed using proprietary and open-source computer aided design (CAD) based modeling tools. Results: From 2018 to 2020 there were 112 individual 3D modeling cases performed, 16 for educational purposes and 96 clinically utilized for procedural planning. Over the 3-year period, demand for clinical modeling tripled and in 2020, 3D modeling was requested in more than one-quarter of STAT category 3, 4 and 5 cases. The most common indications for modeling were complex biventricular repair (n = 30, 31%) and repair of multiple ventricular septal defects (VSD) (n = 11, 12%). Conclusions: Using a multidisciplinary approach, clinical application of 3D modeling can be seamlessly integrated into pre-procedural care for patients with congenital heart disease. Rapid expansion and increased demand for utilization of these tools within a high-volume center demonstrate the high value conferred on these techniques by surgeons and interventionalists alike.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Figures






Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Claims other papers make about this one
Each is checked against this paper’s own text: does it say what the citing paper says it does?
The source backs part of the claim, not all of it — or backs it for a different population, condition or comparison.
In the citing paper
“CCT is invaluable in pre-surgical planning, enabling surgeons to obtain a clear roadmap of the heart’s complex anatomy before corrective surgery (Figure 3). It assists in choosing the appropriate surgical approach and minimising intraoperative risks. An innovative application of CCT in TOF management involves the integration of CT data with 3D printing technology [70]. This approach allows for the”
From Multimodality imaging assessment of tetralogy of Fallot: From diagnosis to long-term follow-up (2023) · cites this paper as [70]
Experimental — accuracy not yet measured
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Medical 3D Printing for the Radiologist
Mitsouras, D., Liacouras, P., Imanzadeh, A., Giannopoulos, A. A., Cai, T., Kumamaru, K. K., George, E., Wake, N., Caterson, E. J., Pomahac, B., et al. (2015) · RadioGraphics · doi:10.1148/rg.2015140320 · Cited by 619
Cardiac 3D Printing and its Future Directions
Vukicevic, M., Mosadegh, B., Min, J. K., & Little, S. H. (2017) · JACC: Cardiovascular Imaging · doi:10.1016/j.jcmg.2016.12.001 · Cited by 535
Applications of 3D printing in cardiovascular diseases
Giannopoulos, A. A., Mitsouras, D., Yoo, S.-J., Liu, P. P., Chatzizisis, Y. S., & Rybicki, F. J. (2016) · Nature Reviews Cardiology · doi:10.1038/nrcardio.2016.170 · Cited by 421
Valverde, I., Gomez-Ciriza, G., Hussain, T., Suarez-Mejias, C., Velasco-Forte, M. N., Byrne, N., Ordoñez, A., Gonzalez-Calle, A., Anderson, D., Hazekamp, M. G., et al. (2017) · European Journal of Cardio-Thoracic Surgery · doi:10.1093/ejcts/ezx208 · Cited by 280
RSNA Special Interest Group for 3D Printing, Chepelev, L., Wake, N., Ryan, J., Althobaity, W., Gupta, A., Arribas, E., Santiago, L., Ballard, D. H., Wang, K. C., et al. (2018) · 3D Printing in Medicine · doi:10.1186/s41205-018-0030-y · Cited by 272
3D printing in medicine of congenital heart diseases
Yoo, S.-J., Thabit, O., Kim, E. K., Ide, H., Yim, D., Dragulescu, A., Seed, M., Grosse-Wortmann, L., & van Arsdell, G. (2016) · 3D Printing in Medicine · doi:10.1186/s41205-016-0004-x · Cited by 181
Interactive Whole-Heart Segmentation in Congenital Heart Disease
Pace, D. F., Dalca, A. V., Geva, T., Powell, A. J., Moghari, M. H., & Golland, P. (2015) · Lecture notes in computer science · doi:10.1007/978-3-319-24574-4_10 · Cited by 126
Garekar, S., Bharati, A. H., Chokhandre, M., Mali, S., Trivedi, B. Y., Changela, V., Solanki, N., Gaikwad, S., & Agarwal, V. (2016) · World Journal for Pediatric and Congenital Heart Surgery · doi:10.1177/2150135116645604 · Cited by 106
Three-Dimensional Printing of Mitral Valve Using Echocardiographic Data
Mahmood, F. U., Owais, K., Taylor, C., Montealegre-Gallegos, M., Manning, W. J., Matyal, R., & Khabbaz, K. R. (2014) · JACC. Cardiovascular imaging · doi:10.1016/j.jcmg.2014.06.020 · Cited by 87
RadioGraphics Update: Medical 3D Printing for the Radiologist
Mitsouras, D., Liacouras, P. C., Wake, N., & Rybicki, F. J. (2020) · Radiographics · doi:10.1148/rg.2020190217 · Cited by 85
Cited by
Multimodality imaging assessment of tetralogy of Fallot: From diagnosis to long-term follow-up
Moscatelli, S., Pergola, V., Motta, R., Fortuni, F., Borrelli, N., Sabatino, J., Leo, I., Avesani, M., Montanaro, C., Surkova, E., et al. (2023) · Children · doi:10.3390/children10111747 · Cited by 17
Metadata
- Authors
- Ghosh, R. M., Jolley, M. A., Mascio, C. E., Chen, J. M., Fuller, S., Rome, J. J., Silvestro, E., & Whitehead, K. K.
- Affiliations
- Children's Hospital of Philadelphia (US)
- West Virginia University (US)
- Corresponding author
- Ghosh, Reena M.
- ORCID
- Venue
- 3D Printing in Medicine
- Published
- 2022-04-21
- Volume
- 8
- Issue
- 1
- Pages
- 11-11
- ISSN
- 2365-6271 (ISSN-L)
- PMC
- PMC9027072
- OpenAlex
- W4224287465
- Cited by
- 52
- References
- 25
- Citations by year
- 2026: 7 · 2025: 7 · 2024: 24 · 2023: 12 · 2022: 2
- FWCI
- 3.27
- Type
- journal article
- Language
- en
- Open access
- gold
- doi.org
- Licence
- cc-by
- creativecommons.org/licenses/by/4.0 (tdm)
- creativecommons.org/licenses/by/4.0 (vor)
- Locations
- 3D Printing in Medicine (publishedVersion, cc-by)
- PubMed Central (publishedVersion, cc-by)
- PubMed (publishedVersion)
- DOAJ (DOAJ: Directory of Open Access Journals) (submittedVersion, cc-by-sa)
- Funders
- National Institutes of Health
- National Heart, Lung, and Blood Institute (R01HL153166)
- Topics
- Physical Sciences › Engineering › Biomedical Engineering › Anatomy and Medical Technology
- Health Sciences › Medicine › Cardiology and Cardiovascular Medicine › Congenital Heart Disease Studies
- Health Sciences › Medicine › Radiology, Nuclear Medicine and Imaging › Cardiac Imaging and Diagnostics
- Keywords
- pediatric cardiothoracic surgery, congenital heart disease, virtual reality, computer-aided design, surgical planning, ventricular septal defect, biventricular repair, cardiac magnetic resonance, cardiac CT, image segmentation, pre-procedural care
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: Clinical 3D modeling to guide pediatric cardiothoracic surgery and intervention using 3D printed anatomic models, computer aided design and virtual reality. https://app.cochat.ai/papers/10.1186/s41205-022-00137-9
- The paper
- Ghosh, R. M., Jolley, M. A., Mascio, C. E., Chen, J. M., Fuller, S., Rome, J. J., Silvestro, E., & Whitehead, K. K. (2022). Clinical 3D modeling to guide pediatric cardiothoracic surgery and intervention using 3D printed anatomic models, computer aided design and virtual reality. 3D Printing in Medicine. https://doi.org/10.1186/s41205-022-00137-9
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.