The DOI matches its Crossref record; 21 of the 21 references it cites were found in a registry or an index.
Systematic review of digital twin technology and applications
Open accessAbstract
As one of the most important applications of digitalization, intelligence, and service, the digital twin (DT) breaks through the constraints of time, space, cost, and security on physical entities, expands and optimizes the relevant functions of physical entities, and enhances their application value. This phenomenon has been widely studied in academia and industry. In this study, the concept and definition of DT, as utilized by scholars and researchers in various fields of industry, are summarized. The internal association between DT and related technologies is explained. The four stages of DT development history are identified. The fundamentals of the technology, evaluation indexes, and model frameworks are reviewed. Subsequently, a conceptual ternary model of DT based on time, space, and logic is proposed. The technology and application status of typical DT systems are described. Finally, the current technical challenges of DT technology are analyzed, and directions for future development are discussed.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
A Cyber-Physical Systems architecture for Industry 4.0-based manufacturing systems
Lee, J., Bagheri, B., & Kao, H.-A. (2015) · Manufacturing Letters · doi:10.1016/j.mfglet.2014.12.001 · Cited by 5,113 · cited 1×
“Process-level DTs are typically used in the following applications: Intelligent manufacturing The manufacturing industry has moved away from purely physical-mechanical processing and entered an era of interaction and iteration between physical and digital worlds [76, 77].”
BackgroundDigital Twin: Mitigating Unpredictable, Undesirable Emergent Behavior in Complex Systems
Grieves, M., & Vickers, J. (2017) · Transdisciplinary Perspectives on Complex Systems · doi:10.1007/978-3-319-38756-7_4 · Cited by 3,727 · cited 4×
“Grieves and Vickers [7] argued that a DT requires not only virtual mapping of products at the macro-geometric level but also all the information about actual manufactured products at the micro-atomic level.”
BackgroundInfluentialThe Digital Twin Paradigm for Future NASA and U.S. Air Force Vehicles
Glaessgen, E., & Stargel, D. (2012) · 53rd AIAA/ASME/ASCE/AHS/ASC Structures, Structural Dynamics and Materials Conference 20th AIAA/ASME/AHS Adaptive Structures Conference 14th AIAA · doi:10.2514/6.2012-1818 · Cited by 3,395 · cited 3×
“Reference Year DT definition 1 [9] 2012 DT is a multi‑scale integrated simulation of a physical equipment or system that makes full use of virtual models, real‑time sen‑ sor data, and historical data on the equipment or system to map the entire life cycle of the process 2 [8] 2012 DT models need to…”
BackgroundMethodDigital twin-driven product design, manufacturing and service with big data
Tao, F., Cheng, J., Qi, Q., Zhang, M., Zhang, H., & Sui, F. (2018) · The International Journal of Advanced Manufacturing Technology · doi:10.1007/s00170-017-0233-1 · Cited by 2,920
About The Importance of Autonomy and Digital Twins for the Future of Manufacturing
Rosen, R., von Wichert, G., Lo, G., & Bettenhausen, K. D. (2015) · IFAC-PapersOnLine · doi:10.1016/j.ifacol.2015.06.141 · Cited by 1,474 · cited 2×
“DT was defined from a linkage-focused perspective by Rosen et al. [11] who argued that a DT not only comprises a large collection of digital products but also should possess a good architecture so that all components are linked.”
BackgroundMethodDigital Twin—The Simulation Aspect
Boschert, S., & Rosen, R. (2016) · Mechatronic Futures · doi:10.1007/978-3-319-32156-1_5 · Cited by 1,158 · cited 1×
“Currently, DTs are characterized by three functions [4]: (1) data fusion of various features of physical objects and high-fidelity real-time mapping of physical objects; (2) coexistence and coevolution throughout the lifecycle of physical objects; and (3) description, optimization, and control of…”
BackgroundReengineering aircraft structural life prediction using a digital twin
Tuegel, E. J., Ingraffea, A. R., Eason, T. G., & Spottswood, S. M. (2011) · International Journal of Aerospace Engineering · doi:10.1155/2011/154798 · Cited by 1,119
Recent advances and trends in predictive manufacturing systems in big data environment
Lee, J., Lapira, E., Bagheri, B., & Kao, H.-A. (2013) · Manufacturing Letters · doi:10.1016/j.mfglet.2013.09.005 · Cited by 1,090
Digital twin driven prognostics and health management for complex equipment
Tao, F., Zhang, M., Liu, Y., & Nee, A. Y. C. (2018) · CIRP Annals · doi:10.1016/j.cirp.2018.04.055 · Cited by 1,000
A Novel Cloud-Based Framework for the Elderly Healthcare Services Using Digital Twin
Liu, Y., Zhang, L., Yang, Y., Zhou, L., Ren, L., Wang, F., Liu, R., Pang, Z., & Deen, M. J. (2019) · IEEE Access · doi:10.1109/access.2019.2909828 · Cited by 763
Self-citation
Cited by
Digital Twins for Healthcare Using Wearables
Johnson, Z., & Saikia, M. J. (2024) · Bioengineering · doi:10.3390/bioengineering11060606 · Cited by 74
Kang, M.-S., Lee, D.-H., Bajestani, M. S., Kim, D. B., & Noh, S. D. (2024) · Machines · doi:10.3390/machines13010019 · Cited by 32
Metadata
- Authors
- Yao, J.-F., Yang, Y., Wang, X.-C., & Zhang, X.-P.
- Venue
- Visual Computing for Industry, Biomedicine, and Art
- Published
- 2023-05-30
- Volume
- 6
- Issue
- 1
- Pages
- 10-10
- ISSN
- 2096-496X (ISSN-L)
- 2524-4442
- OpenAlex
- W4378745639
- Cited by
- 222
- References
- 21
- FWCI
- 7.40
- Type
- journal article
- Language
- en
- Open access
- diamond
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: Systematic review of digital twin technology and applications. https://app.cochat.ai/papers/10.1186/s42492-023-00137-4
- The paper
- Yao, J.-F., Yang, Y., Wang, X.-C., & Zhang, X.-P. (2023). Systematic review of digital twin technology and applications. Visual Computing for Industry, Biomedicine, and Art. https://doi.org/10.1186/s42492-023-00137-4
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.