The DOI matches its Crossref record; 1 of the 1 references it cites were found in a registry or an index.
Heat flow in the Uinta Basin determined from bottom hole temperature (BHT) data
Abstract
The thermal resistance (or Bullard) method is used to judge the utility of petroleum well bottom-hole temperature data in determining surface heat flow and subsurface temperature patterns in a sedimentary basin. Thermal resistance, defined as the quotient of a depth parameter z and thermal conductivity k, governs subsurface temperatures B. In practice, bottom-hole and surface temperatures are combined with a measured or estimated thermal conductivity profile to determine the surface heat flow q 0 which, in turn, is used for all consequent subsurface temperature computations. The method has been applied to the Tertiary Uinta Basin, northeastern Utah. Average geothermal gradient and heat flow for the Uinta Basin are 25 degrees C km (super -1) and 57 mW/m 2 , respectively. Heat flow appears to decrease systematically from 65 to 40 mWm (super -2) from the Duchesne River northward toward the south flank of the Uinta Mountains. This decrease may be the result of refraction of heat into the highly conductive quartzose Precambrian Uinta Mountain Group. More likely, however, it is related to groundwater recharge in late Paleozoic and Mesozoic sandstone and limestone beds that flank the south side of the Uintas. Heat flow values determined for the southeast portion of the basin show some scatter about a mean value of 64 mWm (super -2) but no systematic variation.--Modified journal abstract.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Thermal conductivities of fused and crystalline quartz
Ratcliffe, E. H. (1959) · British Journal of Applied Physics · doi:10.1088/0508-3443/10/1/306 · Cited by 148
Cited by
Anderson, M. P. (2005) · Groundwater · doi:10.1111/j.1745-6584.2005.00052.x · Cited by 1,139
Permeability of the continental crust: Implications of geothermal data and metamorphic systems
Manning, C. E., & Ingebritsen, S. E. (1999) · Reviews of Geophysics · doi:10.1029/1998rg900002 · Cited by 670
Weighing the deep continental biosphere
McMahon, S., & Parnell, J. (2014) · FEMS Microbiology Ecology · doi:10.1111/1574-6941.12196 · Cited by 264
Metadata
- Authors
- Chapman, D. S., Keho, T. H., Bauer, M. S., & Picard, M. D.
- Venue
- Geophysics
- Publisher
- Society of Exploration Geophysicists
- Published
- 1984-04-01
- Volume
- 49
- Issue
- 4
- Pages
- 453-466
- ISSN
- 0016-8033 (ISSN-L)
- 1942-2156
- OpenAlex
- W2081497798
- Cited by
- 161
- References
- 1
- FWCI
- 6.32
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: Heat flow in the Uinta Basin determined from bottom hole temperature (BHT) data. https://app.cochat.ai/papers/10.1190/1.1441680
- The paper
- Chapman, D. S., Keho, T. H., Bauer, M. S., & Picard, M. D. (1984). Heat flow in the Uinta Basin determined from bottom hole temperature (BHT) data. Geophysics. https://doi.org/10.1190/1.1441680
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.