The DOI matches its Crossref record; 57 of the 57 references it cites were found in a registry or an index.
Characterization of Cellulose Nanocrystals Produced by Acid-Hydrolysis from Sugarcane Bagasse as Agro-Waste
Open accessAbstract
Sugarcane bagasse (SCB) is abundantly available agro-waste world-wide and has been used in different applications and its utilization as a source of cellulose attracting attention in the area of biomedical and other applications. The present study investigates the surface morphology, topography, structural, elemental and thermal properties of cellulose nanocrystals (CNCs) extracted by acid-hydrolysis from sugarcane bagasse as agro-waste. Morphological (field emission scanning electron microscopy (FE-SEM), atomic force microscopy (AFM), transmission electron microscopy (TEM)), structural (fourier transformed infrared (FTIR) spectroscopy, X-ray diffraction (XRD)), elemental analysis (energy dispersive x-ray diffraction (EDX)) and thermal characterization (TG-DTG-DTA) of CNCs was carried out. Morphological characterization clearly showed the formation of rod-shaped CNCs having size in the range of 250-480 nm (length) and 20-60 nm (diameter). Elemental analysis (EDX) showed 0.72 wt% sulfur impurity in CNCs along with other main components. X-ray diffraction and thermal analysis revealed that CNCs have higher crystallinity (72.5%) than that of chemically purified cellulose (CPC) (63.5%) but have lower thermal stability. These lab extracted CNCs supposed to have a high potential as nano-reinforcement into bionanocomposite for biomedical and other value-added products in industrial applications.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Cellulose nanomaterials review: structure, properties and nanocomposites
Moon, R. J., Martini, A., Nairn, J., Simonsen, J., & Youngblood, J. (2011) · Chemical Society Reviews · doi:10.1039/c0cs00108b · Cited by 6,756 · cited 2×
“It has been observed that the performance of CNCs as a nanoreinforcing agent influenced with the variation of morphology and properties of these nanoparticles which depend mainly on original source of cellulose and extraction methods [6,16,28].”
BackgroundCellulose nanocrystals: chemistry, self-assembly, and applications
Habibi, Y., Lucia, L. A., & Rojas, O. J. (2010) · Chemical Reviews · doi:10.1021/cr900339w · Cited by 5,980
Nanocelluloses: A New Family of Nature‐Based Materials
Klemm, D., Kramer, F., Moritz, S., Lindström, T., Ankerfors, M., Gray, D., & Dorris, A. (2011) · Angewandte Chemie International Edition · doi:10.1002/anie.201001273 · Cited by 4,465
Biocomposites reinforced with natural fibers: 2000–2010
Faruk, O., Bledzki, A. K., Fink, H.-P., & Sain, M. (2012) · Progress in Polymer Science · doi:10.1016/j.progpolymsci.2012.04.003 · Cited by 4,262
Park, S., Baker, J. O., Himmel, M. E., Parilla, P. A., & Johnson, D. K. (2010) · Biotechnology for Biofuels · doi:10.1186/1754-6834-3-10 · Cited by 3,395
Microfibrillated cellulose and new nanocomposite materials: a review
Siró, I., & Plackett, D. (2010) · Cellulose · doi:10.1007/s10570-010-9405-y · Cited by 2,883
Review: current international research into cellulose nanofibres and nanocomposites
Eichhorn, S. J., Dufresne, A., Aranguren, M., Marcovich, N. E., Capadona, J. R., Rowan, S. J., Weder, C., Thielemans, W., Roman, M., Renneckar, S., et al. (2010) · Journal of Materials Science · doi:10.1007/s10853-009-3874-0 · Cited by 2,418
Azizi Samir, M. A. S., Alloin, F., & Dufresne, A. (2005) · Biomacromolecules · doi:10.1021/bm0493685 · Cited by 2,311
Lavoine, N., Desloges, I., Dufresne, A., & Bras, J. (2012) · Carbohydrate Polymers · doi:10.1016/j.carbpol.2012.05.026 · Cited by 1,791
Beck-Candanedo, S., Roman, M., & Gray, D. G. (2005) · Biomacromolecules · doi:10.1021/bm049300p · Cited by 1,588
Extraction, preparation and characterization of cellulose fibres and nanocrystals from rice husk
Johar, N., Ahmad, I., & Dufresne, A. (2012) · Industrial Crops and Products · doi:10.1016/j.indcrop.2011.12.016 · Cited by 1,438
Oh, S. Y., Yoo, D. I., Shin, Y., Kim, H. C., Kim, H. Y., Chung, Y. S., Park, W. H., & Youk, J. H. (2005) · Carbohydrate Research · doi:10.1016/j.carres.2005.08.007 · Cited by 1,389
Optimization of the isolation of nanocrystals from microcrystalline cellulose by acid hydrolysis
Bondeson, D., Mathew, A., & Oksman, K. (2006) · Cellulose · doi:10.1007/s10570-006-9061-4 · Cited by 1,372
Roman, M., & Winter, W. T. (2004) · Biomacromolecules · doi:10.1021/bm034519+ · Cited by 1,272
Isolation of nanocellulose from waste sugarcane bagasse (SCB) and its characterization
Mandal, A., & Chakrabarty, D. (2011) · Carbohydrate Polymers · doi:10.1016/j.carbpol.2011.06.030 · Cited by 1,073
Chen, W., Yu, H., Liu, Y., Chen, P., Zhang, M., & Hai, Y. (2011) · Carbohydrate Polymers · doi:10.1016/j.carbpol.2010.10.040 · Cited by 971
Nelson, M. L., & O'Connor, R. T. (1964) · Journal of Applied Polymer Science · doi:10.1002/app.1964.070080323 · Cited by 941
Peng, B. L., Dhar, N., Liu, H. L., & Tam, K. C. (2011) · The Canadian Journal of Chemical Engineering · doi:10.1002/cjce.20554 · Cited by 890
Obtaining Cellulose Nanofibers with a Uniform Width of 15 nm from Wood
Abe, K., Iwamoto, S., & Yano, H. (2007) · Biomacromolecules · doi:10.1021/bm700624p · Cited by 885
Lin, N., Huang, J., & Dufresne, A. (2012) · Nanoscale · doi:10.1039/c2nr30260h · Cited by 885
Nelson, M. L., & O'Connor, R. T. (1964) · Journal of Applied Polymer Science · doi:10.1002/app.1964.070080322 · Cited by 719
Extraction and characterization of cellulose nanocrystals from agro-industrial residue – Soy hulls
Flauzino Neto, W. P., Silvério, H. A., Dantas, N. O., & Pasquini, D. (2013) · Industrial Crops and Products · doi:10.1016/j.indcrop.2012.06.041 · Cited by 705
Influence of various chemical treatments on the composition and structure of hemp fibres
Troëdec, M. L., Sedan, D., Peyratout, C. S., Bonnet, J. P., Smith, A., Guinebretière, R., Gloaguen, V., & Krausz, P. (2007) · Composites Part A Applied Science and Manufacturing · doi:10.1016/j.compositesa.2007.12.001 · Cited by 700
Structural FTIR analysis and thermal characterisation of lyocell and viscose-type fibres
Carrillo, F., Colom, X., Suñol, J. J., & Saurina, J. (2004) · European Polymer Journal · doi:10.1016/j.eurpolymj.2004.05.003 · Cited by 656
Thermal degradation behaviors of spherical cellulose nanocrystals with sulfate groups
Wang, N., Ding, E., & Cheng, R. (2007) · Polymer · doi:10.1016/j.polymer.2007.03.062 · Cited by 631
Structure, morphology and thermal characteristics of banana nano fibers obtained by steam explosion
Deepa, B., Abraham, E., Cherian, B. M., Bismarck, A., Blaker, J. J., Pothan, L. A., Leao, A. L., de Souza, S. F., & Kottaisamy, M. (2011) · Bioresource Technology · doi:10.1016/j.biortech.2010.09.030 · Cited by 601
Bioprocess preparation of wheat straw fibers and their characterization
Sain, M., & Panthapulakkal, S. (2006) · Industrial Crops and Products · doi:10.1016/j.indcrop.2005.01.006 · Cited by 575
Garside, P., & Wyeth, P. (2003) · Studies in Conservation · doi:10.1179/sic.2003.48.4.269 · Cited by 561
Extraction of cellulose nanocrystals from mengkuang leaves (Pandanus tectorius)
Sheltami, R. M., Abdullah, I., Ahmad, I., Dufresne, A., & Kargarzadeh, H. (2012) · Carbohydrate Polymers · doi:10.1016/j.carbpol.2012.01.062 · Cited by 534
Silvério, H. A., Flauzino Neto, W. P., Dantas, N. O., & Pasquini, D. (2013) · Industrial Crops and Products · doi:10.1016/j.indcrop.2012.10.014 · Cited by 527
Homogeneous isolation of nanocellulose from sugarcane bagasse by high pressure homogenization
Li, J., Wei, X., Wang, Q., Chen, J., Chang, G., Kong, L., Su, J., & Liu, Y. (2012) · Carbohydrate Polymers · doi:10.1016/j.carbpol.2012.07.038 · Cited by 526
Transparent and conductive paper from nanocellulose fibers
Hu, L., Zheng, G., Yao, J., Liu, N., Weil, B., Eskilsson, M., Karabulut, E., Ruan, Z., Fan, S., Bloking, J. T., et al. (2013) · Energy Environ. Sci. · doi:10.1039/c2ee23635d · Cited by 510
Zuluaga, R., Putaux, J. L., Cruz, J., Vélez, J., Mondragon, I., & Gañán, P. (2009) · Carbohydrate Polymers · doi:10.1016/j.carbpol.2008.09.024 · Cited by 448
Recent Advances in the Application of Natural Fiber Based Composites
Pandey, J. K., Ahn, S. H., Lee, C. S., Mohanty, A. K., & Misra, M. (2010) · Macromolecular Materials and Engineering · doi:10.1002/mame.201000095 · Cited by 436
Abe, K., & Yano, H. (2009) · Cellulose · doi:10.1007/s10570-009-9334-9 · Cited by 380
Recyclable organic solar cells on cellulose nanocrystal substrates
Zhou, Y., Fuentes-Hernandez, C., Khan, T. M., Liu, J.-C., Hsu, J., Shim, J. W., Dindar, A., Youngblood, J. P., Moon, R. J., & Kippelen, B. (2013) · Scientific Reports · doi:10.1038/srep01536 · Cited by 359
O'Connor, R. T., DuPré, E. F., & Mitcham, D. (1958) · Textile Research Journal · doi:10.1177/004051755802800503 · Cited by 346
Bacterial cellulose nanocrystals exhibiting high thermal stability and their polymer nanocomposites
George, J., Ramana, K. V., Bawa, A. S., & Siddaramaiah (2011) · International Journal of Biological Macromolecules · doi:10.1016/j.ijbiomac.2010.09.013 · Cited by 319
Polymorphism of Cellulose I Family: Reinvestigation of Cellulose IVI
Wada, M., Heux, L., & Sugiyama, J. (2004) · Biomacromolecules · doi:10.1021/bm0345357 · Cited by 310
Sugarcane bagasse whiskers: Extraction and characterizations
Teixeira, E. D. M., Bondancia, T. J., Teodoro, K. B. R., Corrêa, A. C., Marconcini, J. M., & Mattoso, L. H. C. (2011) · Industrial Crops and Products · doi:10.1016/j.indcrop.2010.08.009 · Cited by 304
Vartiainen, J., Pöhler, T., Sirola, K., Pylkkänen, L., Alenius, H., Hokkinen, J., Tapper, U., Lahtinen, P., Kapanen, A., Putkisto, K., et al. (2011) · Cellulose · doi:10.1007/s10570-011-9501-7 · Cited by 297
Synthesis and characterization of methylcellulose from sugar cane bagasse cellulose
Viera, R. G. P., Filho, G. R., de Assunção, R. M. N., S. Meireles, C. D., Vieira, J. G., & de Oliveira, G. S. (2007) · Carbohydrate Polymers · doi:10.1016/j.carbpol.2006.05.007 · Cited by 276
Molecularly Engineered Nanocomposites: Layer-by-Layer Assembly of Cellulose Nanocrystals
Podsiadlo, P., Choi, S.-Y., Shim, B., Lee, J., Cuddihy, M., & Kotov, N. A. (2005) · Biomacromolecules · doi:10.1021/bm050333u · Cited by 272
Isolation, preparation and characterization of cellulose microfibers obtained from bagasse
Bhattacharya, D., Germinario, L. T., & Winter, W. T. (2008) · Carbohydrate Polymers · doi:10.1016/j.carbpol.2007.12.005 · Cited by 237
Pasquini, D., Teixeira, E. D. M., Curvelo, A. A. D. S., Belgacem, M. N., & Dufresne, A. (2010) · Industrial Crops and Products · doi:10.1016/j.indcrop.2010.06.022 · Cited by 203
Hydrogel, aerogel and film of cellulose nanofibrils functionalized with silver nanoparticles
Dong, H., Snyder, J. F., Tran, D. T., & Leadore, J. L. (2013) · Carbohydrate Polymers · doi:10.1016/j.carbpol.2013.03.041 · Cited by 194
High-yield Carbonization of Cellulose by Sulfuric Acid Impregnation
Kim, D.-Y., Nishiyama, Y., Wada, M., & Kuga, S. (2001) · Cellulose · doi:10.1023/a:1016621103245 · Cited by 186
Hurtubise, F. G., & Krassig, H. (1960) · Analytical Chemistry · doi:10.1021/ac60158a010 · Cited by 184
Spiridon, I., Teacă, C.-A., & Bodîrlău, R. (2010) · BioResources · doi:10.15376/biores.6.1.400-413 · Cited by 159
Extraction of Cellulose Nanocrystals from Phormium tenax Fibres
Fortunati, E., Puglia, D., Monti, M., Peponi, L., Santulli, C., Kenny, J. M., & Torre, L. (2012) · Journal of Polymers and the Environment · doi:10.1007/s10924-012-0543-1 · Cited by 150
Synthesis and characterization of methylcellulose/PVA based porous composite
Kumar, A., Negi, Y. S., Bhardwaj, N. K., & Choudhary, V. (2012) · Carbohydrate Polymers · doi:10.1016/j.carbpol.2012.02.019 · Cited by 149
Self-citationSiqueira, G. D. F., Tapin‐Lingua, S., Bras, J., Perez, D. D. S., & Dufresne, A. (2010) · Cellulose · doi:10.1007/s10570-010-9463-1 · Cited by 133
Julien, S., Chornet, E., & Overend, R. P. (1993) · Journal of Analytical and Applied Pyrolysis · doi:10.1016/0165-2370(93)80020-z · Cited by 106
Nanocrystalline cellulose prepared from softwood kraft pulp via ultrasonic-assisted acid hydrolysis
Li, W. H., Wang, R., & Liu, S. (2011) · BioResources · doi:10.15376/biores.6.4.4271-4281 · Cited by 98
Synthesis And Characterization Of Cellulose Nanocrystals/PVA Based Bionanocomposite
Kumar, A., Negi, Y. S., Bhardwaj, N. K., & Choudhary, V. (2013) · Advanced Materials Letters · doi:10.5185/amlett.2012.12482 · Cited by 67
Self-citationGeorge, J., Sajeevkumar, V. A., Kumar, R., Ramana, K. V., Sabapathy, S. N., & Bawa, A. S. (2008) · Journal of Applied Polymer Science · doi:10.1002/app.27802 · Cited by 59
Wong, S., & Shanks, R. A. (2008) · Wiley eBooks · doi:10.1002/9780470391501.ch13 · Cited by 15
Cited by
Nanotechnology in agri-food production: an overview
Sekhon, B. (2014) · Nanotechnology, Science and Applications · doi:10.2147/nsa.s39406 · Cited by 1,073
Application of xanthan gum as polysaccharide in tissue engineering: A review
Kumar, A., Rao, K. M., & Han, S. S. (2018) · Carbohydrate Polymers · doi:10.1016/j.carbpol.2017.10.009 · Cited by 540
Self-citationDeepa, B., Abraham, E., Cordeiro, N., Mozetic, M., Mathew, A. P., Oksman, K., Faria, M., Thomas, S., & Pothan, L. A. (2015) · Cellulose · doi:10.1007/s10570-015-0554-x · Cited by 420
Chemical isolation and characterization of different cellulose nanofibers from cotton stalks
Soni, B., Hassan, E. B., & Mahmoud, B. (2015) · Carbohydrate Polymers · doi:10.1016/j.carbpol.2015.08.031 · Cited by 380
New Developments in Medical Applications of Hybrid Hydrogels Containing Natural Polymers
Vasile, C., Pamfil, D., Stoleru, E., & Baican, M. (2020) · Molecules · doi:10.3390/molecules25071539 · Cited by 337
Metadata
- Authors
- Kumar, A., Singh Negi, Y., Choudhary, V., & Kant Bhardwaj, N.
- Venue
- Journal of Materials Physics and Chemistry
- Published
- 2020-10-29
- Volume
- 2
- Issue
- 1
- Pages
- 1-8
- ISSN
- 2333-4436 (ISSN-L)
- OpenAlex
- W2121306887
- Cited by
- 682
- References
- 57
- FWCI
- 17.61
- Type
- journal article
- Language
- en
- Open access
- diamond
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.