The DOI matches its Crossref record; 9 of the 9 references it cites were found in a registry or an index.
Fault-Propagation Folds: Geometry, Kinematic Evolution, and Hydrocarbon Traps (1)
Abstract
Fault-propagation folding, a common folding mechanism in fold and thrust belts, occurs when a propagating thrust fault loses slip and terminates upsection by transferring its shortening to a fold developing at its tip. Area-balanced theoretical models that relate the footwall cutoff angle (θ) to the fold interlimb half-angles (γ* and γ) show that open folds (high γ* and γ) are characterized by relative thickening of stratigraphically higher units, whereas tight folds (low γ* and γ) are characterized by relative thinning of these units. The propagation of thrusts is commonly characterized by the progressive tightening of the fold hinge and steepening of the front limb. Thickening of stratigraphically higher units in the early stages of folding is followed by localized thinning of the front limb in the late stages. The geometry of a fault-propagation fold can be modified by subsequent translation on propagating thrusts. The thrust fault may propagate through the undeformed units, along the synclinal axial plane, or through the forelimb of the anticline, depending on the tightness of the fold. Deeper thrusts commonly are abandoned upsection, and the slip transferred to steeper imbricates, resulting in the listric geometries of many thrust faults. The fold also can be transported over a ramp and onto an upper detachment, resulting in a transition to fault-bend folding. Fault-propagation folds with or without additional fold translation can be distinguished from translated detachment folds by the detailed geometries of the hanging wall and footwall structures, and by the characteristic differences in their relations between fault slip and depth to detachment. Some important characteristics of fault-propagation folds are that they require no slip transfer in or out of the structure, involve a minimum amount of shortening, and have a relatively large depth to detachment, compared to other types of fault-related folds. Fault-propagation folds form important hydrocarbon traps in fold and thrust belts. Some common trap types include fold traps in the crestal area, and fault traps in the footwall and along imbricates on the forelimb and the backlimb of major basement-detached and basement-involved anticlines. Secondary traps also occur in intraplate and leading-edge structures within major thrust sheets.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Structural History and Tectonics of Iran: A Review
(2), J. S. (1968) · AAPG Bulletin · doi:10.1306/5d25c4a5-16c1-11d7-8645000102c1865d · Cited by 1,865
Geometry and kinematics of fault-bend folding
Suppe, J. (1983) · American Journal of Science · doi:10.2475/ajs.283.7.684 · Cited by 1,718
Dahlstrom, C. D. A. (1969) · Canadian Journal of Earth Sciences · doi:10.1139/e69-069 · Cited by 1,164
Principles of structural geology
(1949) · Journal of the Franklin Institute · doi:10.1016/0016-0032(49)90159-3 · Cited by 599
Banks, C. J., & Warburton, J. (1986) · Journal of Structural Geology · doi:10.1016/0191-8141(86)90045-3 · Cited by 323
(2), S. M. (1986) · AAPG Bulletin · doi:10.1306/94886a7e-1704-11d7-8645000102c1865d · Cited by 228
Mitra, S., & Namson, J. S. (1989) · American Journal of Science · doi:10.2475/ajs.289.5.563 · Cited by 174
Oil and Gas Prospecting Beneath Precambrian of Foreland Thrust Plates in Rocky Mountains
Gries, R. (1983) · AAPG Bulletin · doi:10.1306/03b5acb4-16d1-11d7-8645000102c1865d · Cited by 89
Hull, C. E., & Warman, H. R. (1970) · American Association of Petroleum Geologists eBooks · doi:10.1306/m14368c22 · Cited by 21
Cited by
Inverse and forward numerical modeling of trishear fault‐propagation folds
Allmendinger, R. W. (1998) · Tectonics · doi:10.1029/98tc01907 · Cited by 523
Crustal scale geometry of the Zagros fold–thrust belt, Iran
McQuarrie, N. (2004) · Journal of Structural Geology · doi:10.1016/j.jsg.2003.08.009 · Cited by 521
Tavani, S., Storti, F., Lacombe, O., Corradetti, A., Muñoz, J. A., & Mazzoli, S. (2015) · Earth-Science Reviews · doi:10.1016/j.earscirev.2014.11.013 · Cited by 270
A balanced model of the southern Central Andes
Schmitz, M. (1994) · Tectonics · doi:10.1029/93tc02232 · Cited by 138
The 2011 Mw 7.1 Van (Eastern Turkey) earthquake
Elliott, J. R., Copley, A. C., Holley, R., Scharer, K., & Parsons, B. (2013) · Journal of Geophysical Research: Solid Earth · doi:10.1002/jgrb.50117 · Cited by 87
Metadata
- Authors
- (2), S. M.
- Venue
- AAPG Bulletin
- Published
- 1990
- Volume
- 74
- Issue
- 6
- Pages
- 921-945
- ISSN
- 0149-1423 (ISSN-L)
- OpenAlex
- W2102068038
- Cited by
- 372
- References
- 9
- FWCI
- 7.85
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: Fault-Propagation Folds: Geometry, Kinematic Evolution, and Hydrocarbon Traps (1). https://app.cochat.ai/papers/10.1306/0c9b23cb-1710-11d7-8645000102c1865d
- The paper
- (2), S. M. (1990). Fault-Propagation Folds: Geometry, Kinematic Evolution, and Hydrocarbon Traps (1). AAPG Bulletin. https://doi.org/10.1306/0c9b23cb-1710-11d7-8645000102c1865d
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.