CoChat

Rapid-Throughput Skeletal Phenotyping of 100 Knockout Mice Identifies 9 New Genes That Determine Bone Strength

Open access

The DOI matches its Crossref record; 96 of the 96 references it cites were found in a registry or an index.

Abstract

Osteoporosis is a common polygenic disease and global healthcare priority but its genetic basis remains largely unknown. We report a high-throughput multi-parameter phenotype screen to identify functionally significant skeletal phenotypes in mice generated by the Wellcome Trust Sanger Institute Mouse Genetics Project and discover novel genes that may be involved in the pathogenesis of osteoporosis. The integrated use of primary phenotype data with quantitative x-ray microradiography, micro-computed tomography, statistical approaches and biomechanical testing in 100 unselected knockout mouse strains identified nine new genetic determinants of bone mass and strength. These nine new genes include five whose deletion results in low bone mass and four whose deletion results in high bone mass. None of the nine genes have been implicated previously in skeletal disorders and detailed analysis of the biomechanical consequences of their deletion revealed a novel functional classification of bone structure and strength. The organ-specific and disease-focused strategy described in this study can be applied to any biological system or tractable polygenic disease, thus providing a general basis to define gene function in a system-specific manner. Application of the approach to diseases affecting other physiological systems will help to realize the full potential of the International Mouse Phenotyping Consortium.

Overview

The claims and statistics of this paper haven’t been checked yet.

Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.

A few free checks a day · papers already verified open instantly · results are public

Integrity signals

Registry

Crossref · 10.1371/journal.pgen.1002858

Cites

96 of 96 references verified0 citation errors · 0 not checkable

Statistics

Figures

Figure 1 Faxitron x-ray microradiography and micro-CT. A, Faxitron femur images from WT and Sparc mice (arrows indicate location for cortical bone thickness measurement, bar = 1 mm). B, Bone mineral content (BMC) in WT and Sparc mice. Pseudo-colored images in which lower BMC is in green and yellow and higher BMC is red and purple. C, Cumulative frequency histograms of BMC in n = 77 female, 16 week-old WT (mean ±2.0SD reference range in grey) and Sparc mice (red line). The median grey level is indicated by the dotted line. Graphs showing mean (solid line), 1.0SD (dotted line) and 2.0SD (grey box) for D, median grey level BMC, E, bone length and F, cortical thickness in WT (n = 77) mice. Values for Sparc (n = 2) in red. Micro-CT tibia images from G, WT and H, Sparc mice (bar = 1 mm). Graphs showing mean, 1.0SD and 2.0SD for I, BV/TV, J, trabecular number (Tb.N) and K, trabecular thickness (Tb.Th) in WT mice. Values for Sparc in red.
Figure 1 Faxitron x-ray microradiography and micro-CT. A, Faxitron femur images from WT and Sparc mice (arrows indicate location for cortical bone thickness measurement, bar = 1 mm). B, Bone mineral content (BMC) in WT and Sparc mice. Pseudo-colored images in which lower BMC is in green and yellow and higher BMC is red and purple. C, Cumulative frequency histograms of BMC in n = 77 female, 16 week-old WT (mean ±2.0SD reference range in grey) and Sparc mice (red line). The median grey level is indicated by the dotted line. Graphs showing mean (solid line), 1.0SD (dotted line) and 2.0SD (grey box) for D, median grey level BMC, E, bone length and F, cortical thickness in WT (n = 77) mice. Values for Sparc (n = 2) in red. Micro-CT tibia images from G, WT and H, Sparc mice (bar = 1 mm). Graphs showing mean, 1.0SD and 2.0SD for I, BV/TV, J, trabecular number (Tb.N) and K, trabecular thickness (Tb.Th) in WT mice. Values for Sparc in red.CC BY · PubMed Central
Figure 2 Biomechanical analysis. A, Load-displacement curve from a WT tibia showing yield load, maximum load, fracture load and gradient of the linear elastic phase (stiffness). B, Curves from WT and Sparc. C, Graphs showing mean (solid line), 1.0SD (dotted line) and 2.0SD (grey box) for yield load, maximum load, fracture load and stiffness of WT (n = 77) mice. Values for Sparc in red. D, Energy dissipated prior to maximum load (DEML, purple) and elastic stored energy at maximum load (ESEML, yellow). E, Graph showing mean ±1.0SD and 2.0SD for the proportion DEML/(DEML+ESEML) prior to maximum load for WT mice. Value for Sparc in red. F, Energy dissipated prior to fracture (DEF, purple) and elastic stored energy at fracture (ESEF, yellow). G, Graph showing mean ±1.0SD and 2.0SD for the proportion DEF/(DEF+ESEF) prior to fracture for WT mice. Value for Sparc in red. y-axis scale reflects angular transformation to normalize data distribution.
Figure 2 Biomechanical analysis. A, Load-displacement curve from a WT tibia showing yield load, maximum load, fracture load and gradient of the linear elastic phase (stiffness). B, Curves from WT and Sparc. C, Graphs showing mean (solid line), 1.0SD (dotted line) and 2.0SD (grey box) for yield load, maximum load, fracture load and stiffness of WT (n = 77) mice. Values for Sparc in red. D, Energy dissipated prior to maximum load (DEML, purple) and elastic stored energy at maximum load (ESEML, yellow). E, Graph showing mean ±1.0SD and 2.0SD for the proportion DEML/(DEML+ESEML) prior to maximum load for WT mice. Value for Sparc in red. F, Energy dissipated prior to fracture (DEF, purple) and elastic stored energy at fracture (ESEF, yellow). G, Graph showing mean ±1.0SD and 2.0SD for the proportion DEF/(DEF+ESEF) prior to fracture for WT mice. Value for Sparc in red. y-axis scale reflects angular transformation to normalize data distribution.CC BY · PubMed Central
Figure 3 Knockout strains with abnormal skeletal phenotypes. Venn diagram showing strains with at least one outlier structural parameter >2.0SD from the C57BL/6 reference mean determined by Faxitron, micro-CT, Mahalanobis distance calculation or primary phenotype screening. Strains with at least one outlier biomechanical parameter in blue. 10 strains with major phenotypes are highlighted in boxes.
Figure 3 Knockout strains with abnormal skeletal phenotypes. Venn diagram showing strains with at least one outlier structural parameter >2.0SD from the C57BL/6 reference mean determined by Faxitron, micro-CT, Mahalanobis distance calculation or primary phenotype screening. Strains with at least one outlier biomechanical parameter in blue. 10 strains with major phenotypes are highlighted in boxes.CC BY · PubMed Central
Figure 4 Functional classification of bone structure. A, Load-displacement curve from WT tibia showing 2.0SD distribution of C57BL/6 reference range in grey. B, Curves from Bbx, Cadm1 and Fam73b mice with weak but flexible bones and low bone mineral content (BMC). C, Curves from Sparc, Prpsap2, and Slc38a10 mice with weak and brittle bones and low BMC. D, Curves from Asxl1, Trim45, Spns2 and Setdb1 mice with strong but brittle bones and high BMC. E, Proportion of energy dissipated prior to fracture (DEF/DEF+ESEF) versus maximum load. The y-axis scale reflects angular transformation to normalise data distribution. Strains with major phenotypes in red and individual WT mice in black. The plot separates four functional categories of bone structure that include normal bone which is strong and flexible with normal BMC and the three abnormal categories in B, C, and D.
Figure 4 Functional classification of bone structure. A, Load-displacement curve from WT tibia showing 2.0SD distribution of C57BL/6 reference range in grey. B, Curves from Bbx, Cadm1 and Fam73b mice with weak but flexible bones and low bone mineral content (BMC). C, Curves from Sparc, Prpsap2, and Slc38a10 mice with weak and brittle bones and low BMC. D, Curves from Asxl1, Trim45, Spns2 and Setdb1 mice with strong but brittle bones and high BMC. E, Proportion of energy dissipated prior to fracture (DEF/DEF+ESEF) versus maximum load. The y-axis scale reflects angular transformation to normalise data distribution. Strains with major phenotypes in red and individual WT mice in black. The plot separates four functional categories of bone structure that include normal bone which is strong and flexible with normal BMC and the three abnormal categories in B, C, and D.CC BY · PubMed Central
Figure 5 Knockout strains with major phenotypes affecting bone structure and strength. A, Digital radiographs of femurs from WT mice and each of the 10 knockout strains with major phenotypes (bar = 1 mm). B, Magnified images of mid-diaphysis, the region where cortical thickness was determined (bar = 1 mm). C, Grey-scale images pseudo-coloured using a 16-colour palette in which lower BMC is in green and yellow and higher BMC is red and purple (bar = 1 mm). D, Cumulative frequency histograms of whole femur BMC in WT mice and knockout strains: Bbx, Cadm1 and Fam73b mice with weak but flexible bones and low BMC (left); Prpsap2, Slc38a10 and Sparc mice with weak and brittle bones and low BMC (middle); and Asxl1, Setdb1, Spns2 and Trim45 mice with strong but brittle bones and high BMC (right). E, Transverse sections of tibias from WT and knockout mice imaged by micro-CT (bar = 1 mm). F, Mid-sagittal longitudinal sections of tibias from WT and knockout mice imaged by micro-CT (bar = 1 mm).
Figure 5 Knockout strains with major phenotypes affecting bone structure and strength. A, Digital radiographs of femurs from WT mice and each of the 10 knockout strains with major phenotypes (bar = 1 mm). B, Magnified images of mid-diaphysis, the region where cortical thickness was determined (bar = 1 mm). C, Grey-scale images pseudo-coloured using a 16-colour palette in which lower BMC is in green and yellow and higher BMC is red and purple (bar = 1 mm). D, Cumulative frequency histograms of whole femur BMC in WT mice and knockout strains: Bbx, Cadm1 and Fam73b mice with weak but flexible bones and low BMC (left); Prpsap2, Slc38a10 and Sparc mice with weak and brittle bones and low BMC (middle); and Asxl1, Setdb1, Spns2 and Trim45 mice with strong but brittle bones and high BMC (right). E, Transverse sections of tibias from WT and knockout mice imaged by micro-CT (bar = 1 mm). F, Mid-sagittal longitudinal sections of tibias from WT and knockout mice imaged by micro-CT (bar = 1 mm).CC BY · PubMed Central
Figure 6 Relationship between mid-diaphyseal cortical bone diameter and strength. A, Graphs showing mid-diaphyseal cortical bone diameter mean (solid line), 1.0SD (dotted line) and 2.0SD (grey box) in mutant strains with weak but flexible, weak and brittle, and strong but brittle bones. B, Relationship between fracture load and mid-diaphyseal cortical bone diameter. Strains with major phenotypes in red and individual WT mice in black. The 2.0SD reference range for each variable is represented by the grey box. The plot separates four functional categories of bone structure that include normal bone which is strong and flexible with normal BMC and the three abnormal categories weak but flexible (low BMC, green), weak and brittle (low BMC, purple) and strong but brittle (high BMC, orange). C, Relationship between energy dissipated prior to fracture (DEF/(DEF+ESEF)) and cortical bone diameter. The y-axis scale reflects angular transformation to normalize data distribution. The same functional categories of bone structure are separated by this plot.
Figure 6 Relationship between mid-diaphyseal cortical bone diameter and strength. A, Graphs showing mid-diaphyseal cortical bone diameter mean (solid line), 1.0SD (dotted line) and 2.0SD (grey box) in mutant strains with weak but flexible, weak and brittle, and strong but brittle bones. B, Relationship between fracture load and mid-diaphyseal cortical bone diameter. Strains with major phenotypes in red and individual WT mice in black. The 2.0SD reference range for each variable is represented by the grey box. The plot separates four functional categories of bone structure that include normal bone which is strong and flexible with normal BMC and the three abnormal categories weak but flexible (low BMC, green), weak and brittle (low BMC, purple) and strong but brittle (high BMC, orange). C, Relationship between energy dissipated prior to fracture (DEF/(DEF+ESEF)) and cortical bone diameter. The y-axis scale reflects angular transformation to normalize data distribution. The same functional categories of bone structure are separated by this plot.CC BY · PubMed Central

Verification

Claims the paper makes

The claims and statistics of this paper haven’t been checked yet.

Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.

A few free checks a day · papers already verified open instantly · results are public

Claims other papers make about this one

Each is checked against this paper’s own text: does it say what the citing paper says it does?

Self-check

Percentages, sums and reported differences re-computed from the paper’s own numbers.

The self-check needs the paper’s full text.

Citations

Cites

2 retracted

Show all 96 references

Cited by

See all 82

Metadata

Authors
Bassett, J. H. D., Gogakos, A., White, J. K., Evans, H., Jacques, R. M., van der Spek, A. H., Sanger Mouse Genetics Project, Ramirez-Solis, R., Ryder, E., Sunter, D., Boyde, A., Campbell, M. J., Croucher, P. I., & Williams, G. R.
Affiliations
  • Imperial College London (GB)
  • Wellcome Sanger Institute (GB)
  • University of Sheffield (GB)
  • Queen Mary University of London (GB)
  • Garvan Institute of Medical Research (AU)
Corresponding author
  • Croucher, Peter I.
  • Williams, Graham R.
Venue
PLoS Genetics
Published
2012-08-02
Volume
8
Issue
8
Pages
e1002858
ISSN
  • 1553-7390 (ISSN-L)
  • 1553-7404
OpenAlex
W1999038459
Cited by
82
References
93
Citations by year
2026: 4 · 2025: 3 · 2024: 4 · 2023: 4 · 2022: 3 · 2021: 9 · 2020: 9 · 2019: 11 · 2018: 5 · 2017: 4 · 2016: 3 · 2015: 9 · 2014: 12 · 2013: 2
FWCI
7.89
Type
journal article
Language
en
Open access
Locations
  • PLoS Genetics (publishedVersion, cc-by)
  • Europe PMC (PubMed Central) (publishedVersion, cc-by)
  • PubMed Central (publishedVersion, cc-by)
  • PubMed (publishedVersion)
  • White Rose Research Online (University of Leeds, The University of Sheffield, University of York) (acceptedVersion)
  • DOAJ (DOAJ: Directory of Open Access Journals) (submittedVersion, cc-by-sa)
  • Figshare (submittedVersion, cc-by)
  • Queen Mary Research Online (Queen Mary University of London) (submittedVersion, cc-by)
  • Spiral (Imperial College London) (submittedVersion, other-oa)
Funders
  • Ernest Heine Family Foundation
  • Wellcome Trust (18292, 101123, 77157/Z/05/Z, WT077157/Z/05/Z, 094134)
  • European Commission (LSHG-CT-2006-037188)
  • Versus Arthritis (h UK 18292, 18292)
  • Medical Research Council
Topics
  • Health Sciences › Medicine › Orthopedics and Sports Medicine › Bone health and osteoporosis research
  • Life Sciences › Biochemistry, Genetics and Molecular Biology › Molecular Biology › Bone Metabolism and Diseases
  • Life Sciences › Biochemistry, Genetics and Molecular Biology › Genetics › Connective tissue disorders research
Keywords
osteoporosis, bone strength, bone mass, knockout mice, osteopenia, high bone mass, bone biomechanics, bone structure, polygenic disease, mouse genetics, International Mouse Phenotyping Consortium
MeSH terms
Animals, Biomechanical Phenomena, Bone and Bones, Chromosome Mapping, Microradiography, Organ Specificity, Osteoporosis, Phenotype, Tensile Strength, Tomography, X-Ray Computed, Bone Density, Gene Deletion, Mice, Knockout, Positron-Emission Tomography, Mice, High-Throughput Screening Assays, Multimodal Imaging

About these checks

Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.

Statistics and arithmetic are recomputed, not judged.

Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.

What counts as a claim ›How we measure confidence ›How we check this ›

Are you an author, or do you see a problem with this page? Request a review

How to cite

Cite CoChat for the checks on this page, and the paper for its own findings.

This page
CoChat. (2026). Citation check: Rapid-Throughput Skeletal Phenotyping of 100 Knockout Mice Identifies 9 New Genes That Determine Bone Strength. https://app.cochat.ai/papers/10.1371/journal.pgen.1002858
The paper
Bassett, J. H. D., Gogakos, A., White, J. K., Evans, H., Jacques, R. M., van der Spek, A. H., Sanger Mouse Genetics Project, Ramirez-Solis, R., Ryder, E., Sunter, D., Boyde, A., Campbell, M. J., Croucher, P. I., & Williams, G. R. (2012). Rapid-Throughput Skeletal Phenotyping of 100 Knockout Mice Identifies 9 New Genes That Determine Bone Strength. PLoS Genetics. https://doi.org/10.1371/journal.pgen.1002858

Data sources

Bibliographic data: Semantic Scholar, OpenAlex, Crossref.

Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).

Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.