CoChat

In Vitro Thermodynamic Dissection of Human Copper Transfer from Chaperone to Target Protein

Open access

The DOI matches its Crossref record; 36 of the 36 references it cites were found in a registry or an index; 8 of the 24 sources its claims cite were checked for support.

Abstract

Transient protein-protein and protein-ligand interactions are fundamental components of biological activity. To understand biological activity, not only the structures of the involved proteins are important but also the energetics of the individual steps of a reaction. Here we use in vitro biophysical methods to deduce thermodynamic parameters of copper (Cu) transfer from the human copper chaperone Atox1 to the fourth metal-binding domain of the Wilson disease protein (WD4). Atox1 and WD4 have the same fold (ferredoxin-like fold) and Cu-binding site (two surface exposed cysteine residues) and thus it is not clear what drives metal transfer from one protein to the other. Cu transfer is a two-step reaction involving a metal-dependent ternary complex in which the metal is coordinated by cysteines from both proteins (i.e., Atox1-Cu-WD4). We employ size exclusion chromatography to estimate individual equilibrium constants for the two steps. This information together with calorimetric titration data are used to reveal enthalpic and entropic contributions of each step in the transfer process. Upon combining the equilibrium constants for both steps, a metal exchange factor (from Atox1 to WD4) of 10 is calculated, governed by a negative net enthalpy change of ∼10 kJ/mol. Thus, small variations in interaction energies, not always obvious upon comparing protein structures alone, may fuel vectorial metal transfer.

Overview

CoChat Summary

TL;DR

This in vitro study dissects the two-step transfer of Cu from human chaperone Atox1 to the Wilson disease protein domain WD4, using SEC, CD, and ITC to resolve equilibrium and enthalpy/entropy contributions. It finds a modest vectorial Cu-exchange factor of ~10–11 driven by a net favorable enthalpy change, despite an unfavorable entropy change.

Key findings

  • Cu transfer proceeds through a metal-bridged Atox1-Cu-WD4 hetero-complex; SEC analysis at three starting concentrations gave average K1 = 0.42 × 10^6 M⁻¹ and K2 = 26.1 × 10⁻⁶ M, yielding K1·K2 ≈ 11.
  • The overall reaction has ΔG ≈ –5.5 kJ/mol, with step 1 ΔG = –30.1 kJ/mol and step 2 ΔG = +24.6 kJ/mol; the net driving force is enthalpic, with overall ΔH = –11.1 kJ/mol and TΔS = –5.6 kJ/mol.
  • ITC resolved step enthalpies: hetero-complex formation is exothermic (ΔH1 = –25.1 kJ/mol) with a small favorable entropy change (TΔS1 = +5.0 kJ/mol), while dissociation into products is endothermic (ΔH2 = +14.0 kJ/mol) with unfavorable entropy (TΔS2 = –10.6 kJ/mol).
  • The K1·K2 value of ~10 agrees with prior NMR-derived Kex for Atox1/WD4 (~5) and Atox1/MK2 or MK5 (5–10), supporting a shallow but real vectorial gradient toward WD4.

Methods

  • Recombinant human Atox1 and WD4 (ATP7B residues 356–429) were purified as apo proteins; holo forms were loaded with stoichiometric Cu in the presence of DTT.
  • Near-UV CD monitored Cu-Cys ligand-to-metal charge-transfer and ternary-complex formation; SEC with dual 254/280 nm detection separated apo/holo Atox1, WD4, and hetero-complex species; ITC measured reaction heats; NMR diffusion checked WD4 monomeric state.
  • Equilibrium constants K1 and K2 were derived from SEC species concentrations, then combined with ITC data via a linked-equilibria model and Matlab fitting to extract ΔH1 and ΔH2.

Limitations

  • The paper states that in vivo ATP hydrolysis may speed up the reaction and change the thermodynamics of Cu transfer from chaperone to target.
  • The SEC analysis assumes equilibrium is established on the column, that concentrations are well above the individual Cu-binding KD values, and that added metal binds stoichiometrically in a 1:1 ratio; the ITC-derived K1 differed from the SEC value by less than a factor of four, which the authors consider within experimental uncertainty.
  • Evident from the text: this is an in vitro reconstituted system using isolated Atox1 and WD4, not full-length ATP7B or cellular conditions, and the hetero-complex coordination is inferred from CD/SEC/MS rather than directly solved structurally.

Model-written summary. Check it against the paper before relying on it.

Integrity signals

Registry

Crossref · 10.1371/journal.pone.0036102

Cites

36 of 36 references verified0 citation errors · 0 not checkable

Statistics

Nothing to recompute.

Figures

Figure 1 Illustration of Scheme 1. Upon mixing Cu-loaded Atox1 (purple) and apo-WD (green), the proteins interact and form a hetero-complex, Atox1-Cu-WD4 (shown with Cu coordinating one Cys in Atox1 and both Cys in WD4; however, there are other possible Cu coordinations in the hetero-complex [17]), and also products, apo-Atox1 and Cu-WD4, according to the equilibrium constants K1 and K2.
Figure 1 Illustration of Scheme 1. Upon mixing Cu-loaded Atox1 (purple) and apo-WD (green), the proteins interact and form a hetero-complex, Atox1-Cu-WD4 (shown with Cu coordinating one Cys in Atox1 and both Cys in WD4; however, there are other possible Cu coordinations in the hetero-complex [17]), and also products, apo-Atox1 and Cu-WD4, according to the equilibrium constants K1 and K2.CC BY · PubMed Central
Figure 2 CD reveals ternary complex. A. Near-UV CD of apo and holo-forms of Atox1 and WD4. B. Near-UV CD of a 1-to-1 mixture of Cu-Atox1 and apo-WD. For comparison the theoretical CD signal derived for no reaction (i.e., sum of Cu-Atox1 and apo-WD4 signals) and for 100% reaction (i.e., signals for apo-Atox1 and holo-WD4) are also shown. The dotted line is the calculated CD signal for 100% pure heterocomplex at the same concentration (see text).
Figure 2 CD reveals ternary complex. A. Near-UV CD of apo and holo-forms of Atox1 and WD4. B. Near-UV CD of a 1-to-1 mixture of Cu-Atox1 and apo-WD. For comparison the theoretical CD signal derived for no reaction (i.e., sum of Cu-Atox1 and apo-WD4 signals) and for 100% reaction (i.e., signals for apo-Atox1 and holo-WD4) are also shown. The dotted line is the calculated CD signal for 100% pure heterocomplex at the same concentration (see text).CC BY · PubMed Central
Figure 3 SEC probed at 2 wavelengths is used to separate equilibrium species in Scheme 1. A. SEC analysis of a mixture of the two apo proteins (300 µM each) at 280 and 254 nm. B. SEC analysis of holo Atox1 (300 µM) at 280 and 254 nm. C. SEC analysis at 280 nm of a mixture of 300 µM Cu-Atox1 and 300 µM apo-WD4. For comparison, the 280 nm elution trace for the mixture of the two apo-proteins is shown. D. SEC analysis at 280 nm and 254 nm of a mixture of 300 µM Cu-Atox1 and 300 µM apo-WD4. E. De-convolution of the underlying peaks in the elution trace of the Cu-Atox1+apo-WD4 mixture.
Figure 3 SEC probed at 2 wavelengths is used to separate equilibrium species in Scheme 1. A. SEC analysis of a mixture of the two apo proteins (300 µM each) at 280 and 254 nm. B. SEC analysis of holo Atox1 (300 µM) at 280 and 254 nm. C. SEC analysis at 280 nm of a mixture of 300 µM Cu-Atox1 and 300 µM apo-WD4. For comparison, the 280 nm elution trace for the mixture of the two apo-proteins is shown. D. SEC analysis at 280 nm and 254 nm of a mixture of 300 µM Cu-Atox1 and 300 µM apo-WD4. E. De-convolution of the underlying peaks in the elution trace of the Cu-Atox1+apo-WD4 mixture.CC BY · PubMed Central
Figure 4 ITC reveals interaction energetics. A. A solution of 666 µM Cu-Atox1 (in the syringe) is titrated into a solution of 52 µM apoWD4 (in the reaction chamber) at 3°C. B. A solution of 666 µM apo-Atox1 (in the syringe) is titrated into a solution of 62 µM apoWD4 (in the reaction chamber) at 3°C. The top plots are the raw data of heats versus time and the bottom plots are integrated heats as a function of molar ratio of Atox1/WD4. Noise estimation based on the data in B predicts uncertainties for individual ITC points of 0.03 kcal/mol.
Figure 4 ITC reveals interaction energetics. A. A solution of 666 µM Cu-Atox1 (in the syringe) is titrated into a solution of 52 µM apoWD4 (in the reaction chamber) at 3°C. B. A solution of 666 µM apo-Atox1 (in the syringe) is titrated into a solution of 62 µM apoWD4 (in the reaction chamber) at 3°C. The top plots are the raw data of heats versus time and the bottom plots are integrated heats as a function of molar ratio of Atox1/WD4. Noise estimation based on the data in B predicts uncertainties for individual ITC points of 0.03 kcal/mol.CC BY · PubMed Central
Figure 5 Computer simulations mimic ITC titration. A. Concentrations of the five species as a function of progress of the titration experiment shown in Figure 4A using the K values that were derived from the SEC data. B. ITC experimental data (from Figure 4A) together with the best fit to the data (see Supplement for details).
Figure 5 Computer simulations mimic ITC titration. A. Concentrations of the five species as a function of progress of the titration experiment shown in Figure 4A using the K values that were derived from the SEC data. B. ITC experimental data (from Figure 4A) together with the best fit to the data (see Supplement for details).CC BY · PubMed Central

Verification

Claims the paper makes

7 Valid · 0 Not valid · 8 Not checked · 67 Own results and interpretations

45 more claims

Create a free account to see all 82 claims and to verify the 3 references still open.

See all claims — free account
  • Probably not a substantial claim. 10
  • It may state two separate claims as one. 23
  • The quote only partly states this claim. 4

Create a free account to see these claims.

Claims other papers make about this one

Each is checked against this paper’s own text: does it say what the citing paper says it does?

Self-check

Percentages, sums and reported differences re-computed from the paper’s own numbers.

1 of 1

Citations

Cites

Show all 36 references

Research works printed but not linked: 1

  1. L Banci, 2006, The Atx1-Ccc2 complex is a metal-mediated protein-protein interaction., Nat Chem Biol, 2, 367, 10.1038/nchembio797 · DOI · Paper page

Cited by

See all 33

Metadata

Authors
Niemiec, M. S., Weise, C. F., & Wittung-Stafshede, P.
Affiliations
Umeå University (SE)
Corresponding author
Wittung-Stafshede, Pernilla
Venue
PLoS ONE
Published
2012-05-04
Volume
7
Issue
5
Pages
e36102
ISSN
1932-6203 (ISSN-L)
OpenAlex
W2113811934
Cited by
33
References
36
Citations by year
2026: 4 · 2025: 1 · 2023: 1 · 2022: 1 · 2021: 1 · 2020: 1 · 2019: 2 · 2018: 3 · 2017: 2 · 2016: 5 · 2015: 4 · 2014: 2 · 2013: 5
FWCI
3.28
Type
journal article
Language
en
Open access
Locations
  • PLoS ONE (publishedVersion, cc-by)
  • Europe PMC (PubMed Central) (publishedVersion, cc-by)
  • PubMed Central (publishedVersion, cc-by)
  • PubMed (publishedVersion)
  • KTH Publication Database DiVA (KTH Royal Institute of Technology) (submittedVersion, other-oa)
  • DOAJ (DOAJ: Directory of Open Access Journals) (submittedVersion, cc-by-sa)
  • Figshare (submittedVersion, cc-by)
Funders
Knut och Alice Wallenbergs Stiftelse
Topics
  • Health Sciences › Nursing › Nutrition and Dietetics › Trace Elements in Health
  • Physical Sciences › Chemistry › Physical and Theoretical Chemistry › thermodynamics and calorimetric analyses
  • Life Sciences › Biochemistry, Genetics and Molecular Biology › Molecular Biology › Protein Structure and Dynamics
Keywords
copper transfer, Atox1, metallochaperone, enthalpy-entropy compensation, ferredoxin-like fold, calorimetric titration, size exclusion chromatography
MeSH terms
Copper-Transporting ATPases, Copper Transport Proteins, Adenosine Triphosphatases, Binding Sites, Cell Line, Copper, Humans, Thermodynamics, Protein Structure, Tertiary, Molecular Chaperones, Protein Structure, Quaternary, Cation Transport Proteins, Protein Multimerization, Metallochaperones

About these checks

Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.

The claim verdicts this report counts are experimental: their accuracy is not yet measured.

A language model drew the claims from the paper on 2026-10-10, under version 3 of the claim definition (model deepseek-v4.1-flash, prompt extract-v3).

A second model labelled each claim on 2026-10-10 (model jev-1.13-20260917, definition revision gold-guideline-v0.2).

Cited sources are checked with a language model’s help (gpt-6-sol).

Statistics and arithmetic are recomputed, not judged.

Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.

What counts as a claim ›How we measure confidence ›How we check this ›

Are you an author, or do you see a problem with this page? Request a review

How to cite

Cite CoChat for the checks on this page, and the paper for its own findings.

This page
CoChat. (2026). Citation check: In Vitro Thermodynamic Dissection of Human Copper Transfer from Chaperone to Target Protein. https://app.cochat.ai/papers/10.1371/journal.pone.0036102
The paper
Niemiec, M. S., Weise, C. F., & Wittung-Stafshede, P. (2012). In Vitro Thermodynamic Dissection of Human Copper Transfer from Chaperone to Target Protein. PLoS ONE. https://doi.org/10.1371/journal.pone.0036102

Data sources

Bibliographic data: Semantic Scholar, OpenAlex, Crossref.

Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).

Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.