An ORMOSIL-Containing Orthodontic Acrylic Resin with Concomitant Improvements in Antimicrobial and Fracture Toughness Properties
Open accessThe DOI matches its Crossref record; 58 of the 58 references it cites were found in a registry or an index.
Abstract
Global increase in patients seeking orthodontic treatment creates a demand for the use of acrylic resins in removable appliances and retainers. Orthodontic removable appliance wearers have a higher risk of oral infections that are caused by the formation of bacterial and fungal biofilms on the appliance surface. Here, we present the synthetic route for an antibacterial and antifungal organically-modified silicate (ORMOSIL) that has multiple methacryloloxy functionalities attached to a siloxane backbone (quaternary ammonium methacryloxy silicate, or QAMS). By dissolving the water-insoluble, rubbery ORMOSIL in methyl methacrylate, QAMS may be copolymerized with polymethyl methacrylate, and covalently incorporated in the pressure-processed acrylic resin. The latter demonstrated a predominantly contact-killing effect on Streptococcus mutans ATCC 36558 and Actinomyces naselundii ATCC 12104 biofilms, while inhibiting adhesion of Candida albicans ATCC 90028 on the acrylic surface. Apart from its favorable antimicrobial activities, QAMS-containing acrylic resins exhibited decreased water wettability and improved toughness, without adversely affecting the flexural strength and modulus, water sorption and solubility, when compared with QAMS-free acrylic resin. The covalently bound, antimicrobial orthodontic acrylic resin with improved toughness represents advancement over other experimental antimicrobial acrylic resin formulations, in its potential to simultaneously prevent oral infections during appliance wear, and improve the fracture resistance of those appliances.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Figures








Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Claims other papers make about this one
Each is checked against this paper’s own text: does it say what the citing paper says it does?
The source backs part of the claim, not all of it — or backs it for a different population, condition or comparison.
In the citing paper
“QAMS-containing acrylic resins exhibited long-lasting antimicrobial activities, decreased water wettability and improved toughness, without adversely affecting the flexural strength and modulus, water sorption and solubility. The acrylic resin had the potential for preventing bacteria- and fungus-induced stomatitis.”
From Quaternary ammonium-based biomedical materials: State-of-the-art, toxicological aspects and antimicrobial resistance (2017) · cites this paper as [289]
Experimental — accuracy not yet measuredIn the citing paper
“Recently, quaternary ammonium methacryloxy silicate (QAMS) has been developed with both antibacterial and anti-fungal properties for incorporation into dental removable appliances fabricated from acrylic resin (i.e. PMMA) [288], [289], [290]. In those in vitro studies, acrylic resin containing 5 wt% QAMS exhibits contact-killing microbiocidal activities on S. mutans, Actinomyces naeslundii and C.”
From Quaternary ammonium-based biomedical materials: State-of-the-art, toxicological aspects and antimicrobial resistance (2017) · cites this paper as [289]
In the citing paper
“recent studies of QA-containing materials conducted with confocal laser scanning microscopy and three-dimensional reconstruction of biofilms stained with live-dead fluorescent stains [350], [351] indicate that those materials possess a reducing spectrum of biocidal activities from the substrate surface to the top of the biofilms”
From Quaternary ammonium-based biomedical materials: State-of-the-art, toxicological aspects and antimicrobial resistance (2017) · cites this paper as [289]
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Bacterial Biofilms: A Common Cause of Persistent Infections
Costerton, J. W., Stewart, P. S., & Greenberg, E. P. (1999) · Science · doi:10.1126/science.284.5418.1318 · Cited by 12,167
International Organization for Standardization
(2015) · Encyclopedia of Astrobiology · doi:10.1007/978-3-662-44185-5_100574 · Cited by 6,716
Costerton, J. W., Lewandowski, Z., Caldwell, D. E., Korber, D. R., & Lappin-Scott, H. M. (1995) · Annual Review of Microbiology · doi:10.1146/annurev.mi.49.100195.003431 · Cited by 4,544
Mechanisms of biofilm resistance to antimicrobial agents
Mah, T.-F. C., & O'Toole, G. A. (2001) · Trends in Microbiology · doi:10.1016/s0966-842x(00)01913-2 · Cited by 3,921 · cited 1×
“such resistance [31,32], including the inability of antimicrobial”
BackgroundLewis, K. (2001) · Antimicrobial Agents and Chemotherapy · doi:10.1128/aac.45.4.999-1007.2001 · Cited by 1,980 · cited 1×
“such resistance [31,32], including the inability of antimicrobial”
BackgroundChandra, J., Kuhn, D. M., Mukherjee, P. K., Hoyer, L. L., McCormick, T., & Ghannoum, M. A. (2001) · Journal of Bacteriology · doi:10.1128/jb.183.18.5385-5394.2001 · Cited by 1,578 · cited 1×
“albicans biofilm formation is characterized by initial adherence of yeast cells in the first two hours, followed by yeast-hyphal transition, proliferation and maturation within 48 hours [48].”
BackgroundDesigning surfaces that kill bacteria on contact
Tiller, J. C., Liao, C.-J., Lewis, K., & Klibanov, A. M. (2001) · Proceedings of the National Academy of Sciences · doi:10.1073/pnas.111143098 · Cited by 1,196 · cited 2×
“Incorporating QAMS into the acrylic polymer matrix appears to be a promising alternative for formulating an antimicrobial orthodontic acrylic resin that kills oral microorganisms upon contact [19].”
BackgroundAntibacterial action of chitosan and carboxymethylated chitosan
Liu, X., Guan, Y. L., Yang, D. Z., Li, Z., & Yao, K. D. (2000) · Journal of Applied Polymer Science · doi:10.1002/1097-4628(20010214)79:7<1265::aid-app140>3.0.co;2-h · Cited by 1,188 · cited 1×
“The diffusion coefficients of water (D; cm(2)/s) for the 5 orthodontic acrylic groups were calculated using the approximation [28]:”
MethodLaboratory of Biomechanics and Biomedical Engineering, D. O. M. E., Katsikogianni, M., & Missirlis, Y. (2004) · European Cells and Materials · doi:10.22203/ecm.v008a05 · Cited by 1,178
Bacterial adhesion: From mechanism to control
Hori, K., & Matsumoto, S. (2010) · Biochemical Engineering Journal · doi:10.1016/j.bej.2009.11.014 · Cited by 799 · cited 1×
“Adhesion of microorganisms to a material surface is the initial step in the formation of biofilms [41].”
Background
Cited by
Jiao, Y., Niu, L.-N., Ma, S., Li, J., Tay, F. R., & Chen, J.-H. (2017) · Progress in Polymer Science · doi:10.1016/j.progpolymsci.2017.03.001 · Cited by 639
“However, recent studies of QA-containing materials conducted with confocal laser scanning microscopy and three-dimensional reconstruction of biofilms stained with live-dead fluorescent stains [350, 351] indicate that those materials possess a reducing spectrum of biocidal activities from the substrate surface to the t…”
BackgroundSelf-citationDental materials with antibiofilm properties
Wang, Z., Shen, Y., & Haapasalo, M. (2014) · Dental Materials · doi:10.1016/j.dental.2013.12.001 · Cited by 188
Incorporation of antimicrobial agents in denture base resin: A systematic review
An, S., Evans, J. L., Hamlet, S. M., & Love, R. M. (2020) · Journal of Prosthetic Dentistry · doi:10.1016/j.prosdent.2020.03.033 · Cited by 76
Zhou, H., Weir, M. D., Antonucci, J. M., Schumacher, G. E., Zhou, X.-D., & Xu, H. H. (2014) · International Journal of Oral Science · doi:10.1038/ijos.2014.18 · Cited by 73
Lee, B., Lee, C.-C., Lin, H., Shih, W.-A., Hsieh, W., Lai, C., Takeuchi, Y., & Chen, Y. (2016) · Carbohydrate Polymers · doi:10.1016/j.carbpol.2016.06.026 · Cited by 63
Choi, W., Jin, J., Park, S., Kim, J., Lee, M.-J., Sun, H., Kwon, J., Lee, H., Choi, S., & Hong, J. (2020) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.9b21566 · Cited by 59
Gou, Y.-P., Meghil, M. M., Pucci, C. R., Breschi, L., Pashley, D. H., Cutler, C. W., Niu, L., Li, J., & Tay, F. R. (2018) · Acta Biomaterialia · doi:10.1016/j.actbio.2018.06.008 · Cited by 60
Self-citationQuercetin as a simple but versatile primer in dentin bonding
Li, K., Yang, H., Yan, H.-Y., Sun, Y., Chen, X., Guo, J., Yue, J., & Huang, C. (2017) · RSC Advances · doi:10.1039/c7ra07467k · Cited by 50
Next-generation antifungal drugs: Mechanisms, efficacy, and clinical prospects
Lu, X., Zhou, J., Ming, Y., Wang, Y., He, R., Li, Y., Feng, L., Zeng, B., Du, Y., & Wang, C. (2025) · Acta Pharmaceutica Sinica B · doi:10.1016/j.apsb.2025.06.013 · Cited by 57
“It has been shown to exert notable inhibitory effects against several oral pathogens, including Porphyromonas gingivalis , Escherichia coli , Streptococcus species, Actinomyces naeslundii , and Enterococcus faecalis 399-403 .”
Efficacy of removing Candida albicans from orthodontic acrylic bases: an in vitro study
Ghazal, A. R. A., Idris, G., Hajeer, M. Y., Alawer, K., & Cannon, R. D. (2019) · BMC Oral Health · doi:10.1186/s12903-019-0765-x · Cited by 55
Effect of a novel quaternary ammonium silane cavity disinfectant on durability of resin–dentine bond
Daood, U., Yiu, C. K. Y., Burrow, M. F., Niu, L., & Tay, F. R. (2017) · Journal of Dentistry · doi:10.1016/j.jdent.2017.03.003 · Cited by 46
Self-citationLiu, S.-Y., Tonggu, L., Niu, L., Gong, S., Fan, B., Wang, L., Zhao, J.-H., Huang, C., Pashley, D. H., & Tay, F. R. (2016) · Scientific Reports · doi:10.1038/srep21882 · Cited by 50
Self-citationApplication of antibacterial nanoparticles in orthodontic materials
Zhang, Y., Qin, D., Wei, F., & Li, X. (2022) · Nanotechnology Reviews · doi:10.1515/ntrev-2022-0137 · Cited by 44
“The accumulation of microorganisms on acrylic resins increases the incidence of caries and oral dis - eases and jeopardizes the e ffi ciency of orthodontic treat - ments [ 127 ] .”
BackgroundGhorbanzadeh, R., Pourakbari, B., & Bahador, A. (2015) · The Journal of Contemporary Dental Practice · doi:10.5005/jp-journals-10024-1678 · Cited by 39
“6 years (7-15) harboring Streptococcus mutans, Streptococcus sobrinus and Lactobacillus acidophilus as well as Lactobacillus casei participated in the randomized, doubleblind, cross-over study.”
BackgroundGong, S.-Q., Epasinghe, D. J., Zhou, B., Niu, L.-N., Kimmerling, K. A., Rueggeberg, F. A., Yiu, C. K. Y., Mao, J., Pashley, D. H., & Tay, F. R. (2013) · Acta Biomaterialia · doi:10.1016/j.actbio.2013.02.031 · Cited by 36
“In a previous study, QAMS was incorporated into an orthodontic acrylic resin system [16].”
BackgroundMethodInfluentialSelf-citationShahabi, M., Fazel, S. M., & Rangrazi, A. (2021) · Biomimetics · doi:10.3390/biomimetics6010007 · Cited by 36
“The accumulation of these microorganisms increases the incidence of caries and oral diseases and jeopardizes the efficiency of orthodontic treatments [1].”
BackgroundBijle, M. N., Abdalla, M. M., Ashraf, U., Ekambaram, M., & Yiu, C. K. Y. (2020) · Journal of Dentistry · doi:10.1016/j.jdent.2020.103528 · Cited by 37
Self-citationCampos, K. D. P. L., Viana, G. M., Cabral, L. M., Portela, M. B., Hirata, R., Cavalcante, L. M. A., Lourenço, E., & Telles, D. D. M. (2019) · Dental Materials · doi:10.1016/j.dental.2019.10.007 · Cited by 36
Ladder-like polysilsesquioxanes with antibacterial chains and durable siloxane networks
Park, S., Kim, J., Choi, W., Lee, M.-J., Heo, J., Choi, D., Jung, S.-W., Kwon, J., Choi, S., & Hong, J. (2020) · Chemical Engineering Journal · doi:10.1016/j.cej.2020.124686 · Cited by 36
Lee, B., Chen, Y.-J., Wei, T., Ma, T.-L., & Chang, C. (2018) · International Journal of Molecular Sciences · doi:10.3390/ijms19092764 · Cited by 35
“In addition to the antibacterial effect, results have also shown that QAMS incorporation does not affect the flexural strength or modulus [11].”
BackgroundObłąk, E., Piecuch, A., Dworniczek, E., & Olejniczak, T. (2015) · Journal of Oleo Science · doi:10.5650/jos.ess14195 · Cited by 34
Zhou, H., Liu, H., Weir, M. D., Reynolds, M. A., Zhang, K., & Xu, H. H. K. (2016) · Journal of Dentistry · doi:10.1016/j.jdent.2016.07.014 · Cited by 32
“While the 3D viability distributions in dental biofilms were studied via CLSM techniques previously [32,33,38,39], to date, there has been no report on the effect of quaternary amine charge density of dental resin on the 3D viability distribution of biofilms.”
Elabd, G. M., Eldars, W., Shamaa, M. S., & Tawfik, M. A. (2024) · BMC Oral Health · doi:10.1186/s12903-023-03805-2 · Cited by 29
“Therefore, it would be ideal to have an addition that significantly improves acrylic baseplate inhibitory actions while maintaining its biocompatibility [8].”
BackgroundOne-pot synthesis of antibacterial monomers with dual biocidal modes
Zhang, W., Luo, X.-J., Niu, L., Liu, S.-Y., Zhu, W.-C., Epasinghe, J., Chen, L., Li, G.-H., Huang, C., Mao, J., et al. (2014) · Journal of Dentistry · doi:10.1016/j.jdent.2014.06.001 · Cited by 29
“An example of this facile synthesis scheme is the use of tetraethoxysilane (TEOS) for coupling SIQAC to 3-(trimethoxysilyl)propyl methacrylate (3MPTS).(18) An antimicrobial quaternary ammonium methacryloxy silane (QAMS) molecule is formed, which can be dissolved in low concentration in methyl methacrylate to produce a…”
MethodSelf-citationGong, S.-Q., Epasinghe, D. J., Zhang, W., Zhou, B., Niu, L.-N., Ryou, H., Eid, A. A., Frassetto, A., Yiu, C. K. Y., Arola, D. D., et al. (2014) · Polym. Chem. · doi:10.1039/c3py00635b · Cited by 23
Self-citationAnti-herpesviral effects of a novel broad range anti-microbial quaternary ammonium silane, K21
Gulve, N., Kimmerling, K., Johnston, A. D., Krueger, G. R., Ablashi, D. V., & Prusty, B. K. (2016) · Antiviral Research · doi:10.1016/j.antiviral.2016.05.004 · Cited by 22
An, S., Evans, J. L., Hamlet, S. M., & Love, R. M. (2021) · Journal of Prosthetic Dentistry · doi:10.1016/j.prosdent.2021.09.004 · Cited by 22
Naji, S. A., Kashi, T. S. J., Pourhajibagher, M., Behroozibakhsh, M., Masaeli, R., & Bahador, A. (2018) · PubMed Central · Cited by 20
Charavet, C., Graveline, L., Gourdain, Z., & Lupi, L. (2021) · Children · doi:10.3390/children8110967 · Cited by 25
“[37,38], which found better mechanical properties in QAMS-containing resin with no significant cytotoxicity.”
BackgroundSugii, M. M., Ferreira, F. A. D. S., Cogo, K., Lima, D. A. N. L., Groppo, F. C., Imasato, H., Filho, U. P. R., & Aguiar, F. H. B. (2016) · Materials Science and Engineering C · doi:10.1016/j.msec.2016.12.084 · Cited by 21
Incorporation of the microencapsulated antimicrobial agent phytoncide into denture base resin
An, S., Judge, R. B., Wong, R., Arzmi, M. H., Palamara, J. E. A., & Dashper, S. G. (2018) · Australian Dental Journal · doi:10.1111/adj.12640 · Cited by 16
“Denture stomatitis is induced by infections or trauma, angular cheilitis, and denture irritation hyperplasia, amongst other conditions (3, 5-9).”
BackgroundLi, X., Zuo, W., Luo, M. F., Shi, Z., Cui, Z., & Zhu, S. (2013) · Materials Letters · doi:10.1016/j.matlet.2013.04.077 · Cited by 13
Ajami, S., Habibagahi, R., Khashei, R., & Soroorian, M. (2020) · Dental Press Journal of Orthodontics · doi:10.1590/2177-6709.25.6.043-048.oar · Cited by 13
Quaternary ammonium silane (k21) based intracanal medicament triggers biofilm destruction
Kuan, E. K. S., Lim, X. J., Chew, S. X., Ong, S. F., See, L. Y., Lim, S. H., Wong, L. A., Davamani, F. A., Nagendrababu, V., Fawzy, A., et al. (2021) · BMC Oral Health · doi:10.1186/s12903-021-01470-x · Cited by 12
“In this study, a new class of Organosilane quaternary ammoniums (k21(QAS)); KHG FiteBac® Technology, GA, USA) was investigated containing one molecule of 3-(trimethoxysilyl) propyldimethyloctadecyl ammonium chloride (SiQAC) and three molecules of 3 methacryloxypropyltrimethoxysilane which were attached with a silane-b…”
MethodLai, C., Nguyen, A., Ye, L., Hao, J., Koo, H., Mante, F. K., & Özer, F. (2022) · Molecules · doi:10.3390/molecules27248848 · Cited by 12
“mutans deposits while maintaining its biocompatibility remains highly desirable [18].”
BackgroundBahador, A. (2014) · Annual Research & Review in Biology · doi:10.9734/arrb/2014/6611 · Cited by 10
“1589 effects of orthodontic acrylic appliances, while maintaining its biocompatibility is highly desirable [12].”
BackgroundLee, M.-J., Mangal, U., Kim, S., Yoon, Y.-P., Ahn, E.-S., Jang, E.-S., Kwon, J., & Choi, S. (2020) · Polymers · doi:10.3390/polym12081716 · Cited by 11
John, C. N., Abrantes, P. M. D. S., Prusty, B. K., Ablashi, D. V., & Africa, C. W. J. (2019) · Frontiers in Microbiology · doi:10.3389/fmicb.2019.01021 · Cited by 10
Patel, M., Barrera, L., Chu, L., & Whang, K. (2024) · Journal of Prosthetic Dentistry · doi:10.1016/j.prosdent.2024.03.013 · Cited by 9
Morán‐Martínez, J., Parra, R. B. D. R., Betancourt‐Martínez, N. D., García-Garza, R., Jiménez-Villarreal, J., Castañeda, M. S. N., Nava‐Rivera, L. E., Umaña, J. A. F., Carranza-Rosales, P., & Pérez-Vertti, R. D. A. (2018) · Journal of Nanomaterials · doi:10.1155/2018/2585918 · Cited by 10
“Currently, the search for improvement of existing materials in the field of orthodontics has been a subject of study; for example, the organically modified antibacterial silicates (ORMOSIL) such as quaternary ammonium methacryloxy silicate (QAMS) is added to the orthodontic acrylic resins in order to improve antimicro…”
BackgroundJang, E.-J., Hong, Y.-J., Jeong, Y.-H., Kim, K.-E., Jo, E.-S., Lee, M.-J., & Yang, S. (2024) · BMC Oral Health · doi:10.1186/s12903-024-04547-5 · Cited by 6
Oral Microbiome in Orthodontic Acrylic Retainer
Kasibut, P., Kuvatanasuchati, J., Thaweboon, B., & Sirisoontorn, I. (2022) · Polymers · doi:10.3390/polym14173583 · Cited by 6
“Patients’ oral health can be jeopardized by the development of biofilms adhering to the surfaces of the acrylic retainers [11].”
BackgroundQuaternary ammonium compound derivatives for biomedical applications
Sugii, M. M., Ferreira, F. A. D. S., Cogo, K., Filho, U. P. R., & Aguiar, F. H. B. (2019) · Elsevier eBooks · doi:10.1016/b978-0-08-102814-8.00006-8 · Cited by 7
Bahador, A. (2014) · Annual Research & Review in Biology · doi:10.9734/arrb/2014/7166 · Cited by 4
“Therefore, an additive that robustly enhances the inhibitory effects of ABA, while maintaining its biocompatibility, is highly desirable [7].”
BackgroundBahador, A., Ghorbanzadeh, R., Kassaee, M. Z., & Sodagar, A. (2014) · Cited by 4
Arıcı, N., & Ural, Ç. (2013) · Turkish Journal of Orthodontics · doi:10.13076/j.tjo.2013.26.02_92 · Cited by 3
“However, few studies have investigated the influence of denture cleansers on cold-cured acrylic resin surfaces.(1,26,27) Therefore, the aim of this study was to evaluate and compare the effects of one denture cleanser on the surface roughness of heat-cured and cold-cured acrylic resin materials used in orthodontics an…”
BackgroundGupta, V., & Whang, K. (2025) · Journal of Prosthodontic Research · doi:10.2186/jpr.jpr_d_24_00155 · Cited by 2
Huang, C. M., Yin, I. X., Niu, J. Y., Yu, O. Y., & Hung, C. C. (2026) · Dental Materials · doi:10.1016/j.dental.2026.03.159 · Cited by 2
Mechanical and Time-Dependent Stability of K18-IBOA-Modified 3D-Printed Denture Base Resins
Bennett, G. W., Beatty, M. W., & Simetich, B. (2026) · Materials · doi:10.3390/ma19122430 · Cited by 1
“Prior work incorporating K18 into powder–liquid orthodontic acrylic formulations demonstrated enhanced fracture toughness, with no adverse effect on flexural strength or modulus [19,24].”
InfluentialNanosilver Weds Acrylic Resin: A Fit or Misfit? A Review
Selvaraj, S., & Dorairaj, J. (2015) · Journal of Advanced Oral Research · doi:10.1177/2229411220150302 · Cited by 1
“the inhibitory effects of the acrylic prosthesis, while maintaining its biocompatibility, is highly enviable.[8]”
BackgroundAssessment of the Antifungal Activity of PMMA-MgO and PMMA-Ag Nanocomposite
Arf, A. N., Kareem, F. A., Khdir, Y. K., & Zafar, M. S. (2024) · Kurdistan Journal of Applied Research · doi:10.24017/science.2024.1.6 · Cited by 1
“The accumulation of these microorganisms increases the risk of developing cavities and oral diseases, posing a threat to the effectiveness of orthodontic treatments [2].”
BackgroundChoi, Y.-R., & Kang, M.-K. (2023) · Journal of Korean society of Dental Hygiene · doi:10.13065/jksdh.20230051
Metadata
- Authors
- Gong, S.-Q., Epasinghe, J., Rueggeberg, F. A., Niu, L.-N., Mettenberg, D., Yiu, C. K. Y., Blizzard, J. D., Wu, C. D., Mao, J., Drisko, C. L., Pashley, D. H., & Tay, F. R.
- Affiliations
- Georgia State University (US)
- Air Force Medical University (CN)
- University of Hong Kong (HK)
- University of Illinois Chicago (US)
- Tongji Hospital (CN)
- Corresponding author
- Mao, Jing
- Tay, Franklin R.
- Venue
- PLoS ONE
- Publisher
- Public Library of Science (PLoS)
- Published
- 2012-08-01
- Volume
- 7
- Issue
- 8
- Pages
- e42355
- ISSN
- 1932-6203 (ISSN-L)
- PMC
- PMC3411672
- OpenAlex
- W2055733391
- Cited by
- 53
- References
- 57
- Citations by year
- 2026: 2 · 2025: 2 · 2024: 4 · 2023: 2 · 2022: 3 · 2021: 4 · 2020: 6 · 2019: 4 · 2018: 5 · 2017: 3 · 2016: 5 · 2015: 3 · 2014: 5 · 2013: 5
- FWCI
- 5.86
- Type
- journal article
- Language
- en
- Open access
- gold
- doi.org
- Locations
- PLoS ONE (publishedVersion, cc-by)
- Europe PMC (PubMed Central) (publishedVersion, cc-by)
- PubMed Central (publishedVersion, cc-by)
- PubMed (publishedVersion)
- DOAJ (DOAJ: Directory of Open Access Journals) (submittedVersion)
- Figshare (submittedVersion, cc-by)
- The HKU Scholars Hub (University of Hong Kong) (submittedVersion, cc-by-nc-nd)
- Funders
- National Institute of Dental and Craniofacial Research (R01DE015306)
- Topics
- Health Sciences › Dentistry › General Dentistry › Dental materials and restorations
- Life Sciences › Immunology and Microbiology › Applied Microbiology and Biotechnology › Antimicrobial agents and applications
- Physical Sciences › Materials Science › Materials Chemistry › Silicone and Siloxane Chemistry
- Keywords
- organically modified silica, antimicrobial activity, antifungal activity, biofilm inhibition, Streptococcus mutans, Candida albicans, fracture toughness, water wettability, removable orthodontic appliances
- MeSH terms
- Acrylic Resins, Actinomyces, Anti-Infective Agents, Candida albicans, Orthodontic Appliances, Removable, Resins, Synthetic, Siloxanes, Streptococcus mutans
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.