An ORMOSIL-Containing Orthodontic Acrylic Resin with Concomitant Improvements in Antimicrobial and Fracture Toughness Properties
Open accessThe DOI matches its Crossref record; 58 of the 58 references it cites were found in a registry or an index.
Abstract
Global increase in patients seeking orthodontic treatment creates a demand for the use of acrylic resins in removable appliances and retainers. Orthodontic removable appliance wearers have a higher risk of oral infections that are caused by the formation of bacterial and fungal biofilms on the appliance surface. Here, we present the synthetic route for an antibacterial and antifungal organically-modified silicate (ORMOSIL) that has multiple methacryloloxy functionalities attached to a siloxane backbone (quaternary ammonium methacryloxy silicate, or QAMS). By dissolving the water-insoluble, rubbery ORMOSIL in methyl methacrylate, QAMS may be copolymerized with polymethyl methacrylate, and covalently incorporated in the pressure-processed acrylic resin. The latter demonstrated a predominantly contact-killing effect on Streptococcus mutans ATCC 36558 and Actinomyces naselundii ATCC 12104 biofilms, while inhibiting adhesion of Candida albicans ATCC 90028 on the acrylic surface. Apart from its favorable antimicrobial activities, QAMS-containing acrylic resins exhibited decreased water wettability and improved toughness, without adversely affecting the flexural strength and modulus, water sorption and solubility, when compared with QAMS-free acrylic resin. The covalently bound, antimicrobial orthodontic acrylic resin with improved toughness represents advancement over other experimental antimicrobial acrylic resin formulations, in its potential to simultaneously prevent oral infections during appliance wear, and improve the fracture resistance of those appliances.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Figures








Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Claims other papers make about this one
Each is checked against this paper’s own text: does it say what the citing paper says it does?
The source backs part of the claim, not all of it — or backs it for a different population, condition or comparison.
In the citing paper
“QAMS-containing acrylic resins exhibited long-lasting antimicrobial activities, decreased water wettability and improved toughness, without adversely affecting the flexural strength and modulus, water sorption and solubility. The acrylic resin had the potential for preventing bacteria- and fungus-induced stomatitis.”
From Quaternary ammonium-based biomedical materials: State-of-the-art, toxicological aspects and antimicrobial resistance (2017) · cites this paper as [289]
Experimental — accuracy not yet measuredIn the citing paper
“Recently, quaternary ammonium methacryloxy silicate (QAMS) has been developed with both antibacterial and anti-fungal properties for incorporation into dental removable appliances fabricated from acrylic resin (i.e. PMMA) [288], [289], [290]. In those in vitro studies, acrylic resin containing 5 wt% QAMS exhibits contact-killing microbiocidal activities on S. mutans, Actinomyces naeslundii and C.”
From Quaternary ammonium-based biomedical materials: State-of-the-art, toxicological aspects and antimicrobial resistance (2017) · cites this paper as [289]
In the citing paper
“recent studies of QA-containing materials conducted with confocal laser scanning microscopy and three-dimensional reconstruction of biofilms stained with live-dead fluorescent stains [350], [351] indicate that those materials possess a reducing spectrum of biocidal activities from the substrate surface to the top of the biofilms”
From Quaternary ammonium-based biomedical materials: State-of-the-art, toxicological aspects and antimicrobial resistance (2017) · cites this paper as [289]
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Bacterial Biofilms: A Common Cause of Persistent Infections
Costerton, J. W., Stewart, P. S., & Greenberg, E. P. (1999) · Science · doi:10.1126/science.284.5418.1318 · Cited by 12,167
International Organization for Standardization
(2015) · Encyclopedia of Astrobiology · doi:10.1007/978-3-662-44185-5_100574 · Cited by 6,716
Costerton, J. W., Lewandowski, Z., Caldwell, D. E., Korber, D. R., & Lappin-Scott, H. M. (1995) · Annual Review of Microbiology · doi:10.1146/annurev.mi.49.100195.003431 · Cited by 4,544
Mechanisms of biofilm resistance to antimicrobial agents
Mah, T.-F. C., & O'Toole, G. A. (2001) · Trends in Microbiology · doi:10.1016/s0966-842x(00)01913-2 · Cited by 3,921 · cited 1×
“such resistance [31,32], including the inability of antimicrobial”
BackgroundLewis, K. (2001) · Antimicrobial Agents and Chemotherapy · doi:10.1128/aac.45.4.999-1007.2001 · Cited by 1,980 · cited 1×
“such resistance [31,32], including the inability of antimicrobial”
BackgroundChandra, J., Kuhn, D. M., Mukherjee, P. K., Hoyer, L. L., McCormick, T., & Ghannoum, M. A. (2001) · Journal of Bacteriology · doi:10.1128/jb.183.18.5385-5394.2001 · Cited by 1,578 · cited 1×
“albicans biofilm formation is characterized by initial adherence of yeast cells in the first two hours, followed by yeast-hyphal transition, proliferation and maturation within 48 hours [48].”
BackgroundDesigning surfaces that kill bacteria on contact
Tiller, J. C., Liao, C.-J., Lewis, K., & Klibanov, A. M. (2001) · Proceedings of the National Academy of Sciences · doi:10.1073/pnas.111143098 · Cited by 1,196 · cited 2×
“Incorporating QAMS into the acrylic polymer matrix appears to be a promising alternative for formulating an antimicrobial orthodontic acrylic resin that kills oral microorganisms upon contact [19].”
BackgroundAntibacterial action of chitosan and carboxymethylated chitosan
Liu, X., Guan, Y. L., Yang, D. Z., Li, Z., & Yao, K. D. (2000) · Journal of Applied Polymer Science · doi:10.1002/1097-4628(20010214)79:7<1265::aid-app140>3.0.co;2-h · Cited by 1,188 · cited 1×
“The diffusion coefficients of water (D; cm(2)/s) for the 5 orthodontic acrylic groups were calculated using the approximation [28]:”
MethodLaboratory of Biomechanics and Biomedical Engineering, D. O. M. E., Katsikogianni, M., & Missirlis, Y. (2004) · European Cells and Materials · doi:10.22203/ecm.v008a05 · Cited by 1,178
Bacterial adhesion: From mechanism to control
Hori, K., & Matsumoto, S. (2010) · Biochemical Engineering Journal · doi:10.1016/j.bej.2009.11.014 · Cited by 799 · cited 1×
“Adhesion of microorganisms to a material surface is the initial step in the formation of biofilms [41].”
BackgroundAlginate Overproduction Affects Pseudomonas aeruginosa Biofilm Structure and Function
Hentzer, M., Teitzel, G. M., Balzer, G. J., Heydorn, A., Molin, S., Givskov, M., & Parsek, M. R. (2001) · Journal of Bacteriology · doi:10.1128/jb.183.18.5395-5401.2001 · Cited by 693 · cited 1×
“The oral biofilm reactor consisted of a reactor vessel and a specimen holder (Figure S1) containing 18 recessed holders for insertion of substrate disks over which microbial biofilms could be grown [22].”
BackgroundGottenbos, B., van der Mei, H. C., Klatter, F., Nieuwenhuis, P., & Busscher, H. J. (2002) · Biomaterials · doi:10.1016/s0142-9612(01)00263-0 · Cited by 505
Cheng, L., Weir, M. D., Xu, H. H. K., Antonucci, J. M., Kraigsley, A. M., Lin, N. J., Lin-Gibson, S., & Zhou, X. (2012) · Dental Materials · doi:10.1016/j.dental.2012.01.005 · Cited by 354 · cited 1×
“[39], has also exhibited sustained antibacterial effect on S.”
BackgroundOral Colonization By Candida Albicans
Cannon, R. D., & Chaffin, W. L. (1999) · Critical Reviews in Oral Biology & Medicine · doi:10.1177/10454411990100030701 · Cited by 335 · cited 1×
“During the adhesion phase, the yeast cells bind to a surface coated with a glycoproteinaceous conditioning film [49].”
BackgroundSurface-bonded antimicrobial activity of an organosilicon quaternary ammonium chloride
Isquith, A. J., Abbott, E. A., & Walters, P. A. (1972) · Applied Microbiology · doi:10.1128/aem.24.6.859-863.1972 · Cited by 329 · cited 1×
“against a broad range of microorganisms [35].”
Antonucci, J. M., Zeiger, D. N., Tang, K., Lin-Gibson, S., Fowler, B. O., & Lin, N. J. (2012) · Dental Materials · doi:10.1016/j.dental.2011.10.004 · Cited by 287 · cited 1×
“This is comparable to a recent study when similar concentrations of a quaternary ammonium methacrylate were incorporated into resins used for preparing tooth-colored filling materials [25].”
ResultBiofilm formation of Candida albicans is variably affected by saliva and dietary sugars
Jin, Y., Samaranayake, L. P., Samaranayake, Y., & Yip, H. K. (2004) · Archives of Oral Biology · doi:10.1016/j.archoralbio.2004.04.011 · Cited by 266 · cited 1×
“It should be noted that the salivary pellicle has an impact on both bacterial [44] and fungal [45] attachment to teeth and prostheses in the oral cavity.”
BackgroundMinagi, S., Miyake, Y., Inagaki, K., Tsuru, H., & Suginaka, H. (1985) · Infection and Immunity · doi:10.1128/iai.47.1.11-14.1985 · Cited by 263 · cited 1×
“[50] have reported enhanced adhesion of C.”
Flexural properties and impact strength of denture base polymer reinforced with woven glass fibers
Kanie, T., Fujii, K., Arikawa, H., & Inoue, K. (2000) · Dental Materials · doi:10.1016/s0109-5641(99)00097-4 · Cited by 210 · cited 1×
“possible strategy for improving their mechanical properties [53].”
BackgroundMonteiro, D. R., Gorup, L. F., Takamiya, A. S., de Camargo, E. R., Filho, A. C. R., & Barbosa, D. B. (2012) · Journal of Prosthodontics · doi:10.1111/j.1532-849x.2011.00772.x · Cited by 192 · cited 1×
“As acrylic resin is a rather hydrophobic polymer with low water uptake, releasing of silver nanoparticles from the bulk resin is limited [12,13].”
BackgroundLaboratory methods for studies of bacterial adhesion
An, Y. H., & Friedman, R. J. (1997) · Journal of Microbiological Methods · doi:10.1016/s0167-7012(97)00058-4 · Cited by 187 · cited 1×
“Biofilm formation can be described as a two-phase process, including an initial, instantaneous and reversible physical phase (phase one), followed by a time-dependent and irreversible molecular and cellular phase (phase two) [42].”
BackgroundToxicity of methyl methacrylate in dentistry
Leggat, P. A., & Kedjarune, U. (2003) · International Dental Journal · doi:10.1111/j.1875-595x.2003.tb00736.x · Cited by 186 · cited 1×
“As remnant MMA within the polymerized PMMA acrylic is cytotoxic [29], experiments were performed before and after the processed QAMS-containing acrylic were subjected to methanol extraction of the residual MMA.”
MethodChávez de Paz, L. E. (2009) · Applied and Environmental Microbiology · doi:10.1128/aem.02000-08 · Cited by 184 · cited 2×
“1, Faculty of Odontology, Malmö University, Malmö, Sweden) [23].”
InfluentialRole of chemical interactions in bacterial adhesion to polymer surfaces
Speranza, G., Gottardi, G., Pederzolli, C., Lunelli, L., Canteri, R., Pasquardini, L., Carli, E., Lui, A., Maniglio, D., Brugnara, M., et al. (2004) · Biomaterials · doi:10.1016/j.biomaterials.2003.08.061 · Cited by 179
Comparison of fracture tests of denture base materials
Zappini, G., Kammann, A., & Wachter, W. (2003) · The Journal of Prosthetic Dentistry · doi:10.1016/j.prosdent.2003.09.008 · Cited by 176 · cited 1×
“Hence, future work should be performed on the impact resistance of orthodontic acrylic resins containing QAMS [58].”
BackgroundEffect of resin hydrophilicity and temperature on water sorption of dental adhesive resins
Yiu, C. K. Y., King, N. M., Carrilho, M. R. O., Sauro, S., Rueggeberg, F. A., Prati, C., Carvalho, R. M., Pashley, D. H., & Tay, F. R. (2006) · Biomaterials · doi:10.1016/j.biomaterials.2005.09.037 · Cited by 163
Self-citationHarkes, G., Feijen, J., & Dankert, J. (1991) · Biomaterials · doi:10.1016/0142-9612(91)90074-k · Cited by 160 · cited 1×
“In addition, surface characteristics such as hydrophobicity and charge density may influence bacterial adhesion and proliferation [46,47].”
BackgroundWady, A. F., Machado, A. L., Zucolotto, V., Zamperini, C. A., Berni, E., & Vergani, C. E. (2012) · Journal of Applied Microbiology · doi:10.1111/j.1365-2672.2012.05293.x · Cited by 156 · cited 1×
“As acrylic resin is a rather hydrophobic polymer with low water uptake, releasing of silver nanoparticles from the bulk resin is limited [12,13].”
BackgroundIn Vitro and In Vivo Activities of Levofloxacin against Biofilm-Producing Pseudomonas aeruginosa
Ishida, H., Ishida, Y., Kurosaka, Y., Otani, T., Sato, K., & Kobayashi, H. (1998) · Antimicrobial Agents and Chemotherapy · doi:10.1128/aac.42.7.1641 · Cited by 149 · cited 1×
“exopolysaccharide matrix of a biofilm [33], and decreases in”
BackgroundThe Surface Activity of Silicones: A Short Review
Owen, M. J. (1980) · Industrial & Engineering Chemistry Product Research and Development · doi:10.1021/i360073a023 · Cited by 148 · cited 1×
“Because the cross-linked backbone of a polymer determines its mechanical behavior, polymers prepared from SiQAC-functionalized macromonomers may have improved toughness and damping properties, due to the flexibility of the siloxane backbone, as compared with rigid C–C bonds [20].”
BackgroundAntibacterial effects of a new dental acrylic resin containing silver nanoparticles
Kassaee, M. Z., Akhavan, A., Sheikh, N., & Sodagar, A. (2008) · Journal of Applied Polymer Science · doi:10.1002/app.28762 · Cited by 141
Effect of removable orthodontic appliances on oral colonisation by mutans streptococci in children
Batoni, G., Pardini, M., Giannotti, A., Ota, F., Rita Giuca, M., Gabriele, M., Campa, M., & Senesi, S. (2001) · European Journal Of Oral Sciences · doi:10.1034/j.1600-0722.2001.00089.x · Cited by 138 · cited 1×
“Removable orthodontic appliances often promote the accumulation and colonization of dental plaque bacteria including Streptococcus mutans [5] and Candida albicans [6].”
BackgroundBacterial adhesion inhibition of the quaternary ammonium functionalized silica nanoparticles
Song, J., Kong, H., & Jang, J. (2011) · Colloids and Surfaces B Biointerfaces · doi:10.1016/j.colsurfb.2010.10.027 · Cited by 131
Antimicrobial acrylic materials with in situ generated silver nanoparticles
Oei, J. D., Zhao, W. W., Chu, L., DeSilva, M., Ghimire, A., Rawls, H. R., & Whang, K. (2011) · Journal of Biomedical Materials Research Part B Applied Biomaterials · doi:10.1002/jbm.b.31963 · Cited by 122 · cited 1×
“13], or generated in-situ during resin polymerization [14], have been impregnated in acrylic resins to confer antimicrobial activity to the removal appliances.”
BackgroundLessa, F. C. R., Enoki, C., Ito, I. Y., Faria, G., Matsumoto, M. A. N., & Nelson‐Filho, P. (2007) · American Journal of Orthodontics and Dentofacial Orthopedics · doi:10.1016/j.ajodo.2006.09.042 · Cited by 121
Effect of silver nano particles on flexural strength of acrylic resins
Sodagar, A., Kassaee, M. Z., Akhavan, A., Javadi, N., Arab, S., & Kharazifard, M. J. (2011) · Journal of Prosthodontic Research · doi:10.1016/j.jpor.2011.06.002 · Cited by 109
Oosterhof, J. J. H., Buijssen, K. J. D. A., Busscher, H. J., van der Laan, B. F. A. M., & van der Mei, H. C. (2006) · Applied and Environmental Microbiology · doi:10.1128/aem.72.5.3673-3677.2006 · Cited by 109
Antibacterial Nanocomposite with Calcium Phosphate and Quaternary Ammonium
Cheng, L., Weir, M. D., Zhang, K., Xu, S. M., Chen, Q., Zhou, X., & Xu, H. H. K. (2012) · Journal of Dental Research · doi:10.1177/0022034512440579 · Cited by 100 · cited 1×
“mutans after water-aging for 180 days [40].”
Pratt-Terpstra, I. H., Weerkamp, A. H., & Busscher, H. J. (1989) · Journal of Dental Research · doi:10.1177/00220345890680030501 · Cited by 100 · cited 1×
“It should be noted that the salivary pellicle has an impact on both bacterial [44] and fungal [45] attachment to teeth and prostheses in the oral cavity.”
BackgroundArendorf, T., & Addy, M. (1985) · Journal Of Clinical Periodontology · doi:10.1111/j.1600-051x.1985.tb00926.x · Cited by 94 · cited 1×
“Removable orthodontic appliances often promote the accumulation and colonization of dental plaque bacteria including Streptococcus mutans [5] and Candida albicans [6].”
BackgroundGong, S.-Q., Niu, L.-N., Kemp, L. K., Yiu, C. K. Y., Ryou, H., Qi, Y.-P., Blizzard, J. D., Nikonov, S., Brackett, M. G., Messer, R. L. W., et al. (2012) · Acta Biomaterialia · doi:10.1016/j.actbio.2012.05.031 · Cited by 75 · cited 2×
“The QAMS, being an organically modified silicate (ORMOSIL), was synthesized by sol-gel reaction in the manner described previously [17].”
BackgroundMethodSelf-citationThe effects of orthodontic appliances on Candida in the human mouth
Hibino, K., Wong, R., Hägg, U., & Samaranayake, L. P. (2009) · International Journal of Paediatric Dentistry · doi:10.1111/j.1365-263x.2009.00988.x · Cited by 75 · cited 1×
“Uncontrolled accumulation of bacterial and fungal biofilms on or surrounding dental devices may contribute to dental caries [2], periodontal disease [3], and chronic atrophic candidiasis [4].”
BackgroundAHLSTRÖM, B., THOMPSON, R. A., & EDEBO, L. (1999) · APMIS · doi:10.1111/j.1699-0463.1999.tb01560.x · Cited by 72 · cited 9×
“Leaching of N+ species from acrylic specimens containing 6 wt% QAMS was significantly higher, while specimens containing 5% SiQAC (without methacryloxy groups that copolymerized with PMMA) leached the most (P,0.05).”
BackgroundInfluentialFatigue resistance of removable orthodontic appliance reinforced with glass fibre weave
Rantala, L. I., Lastumäki, T. M., Peltomäki, T., & VALLITTU, P. K. (2003) · Journal of Oral Rehabilitation · doi:10.1046/j.1365-2842.2003.01108.x · Cited by 61 · cited 1×
“This reduction renders the appliance more susceptible to fracture, due to its low resistance to impact, low flexural strength, or low fatigue strength [16].”
BackgroundRegis, R. R., Zanini, A. P., Della Vecchia, M. P., Silva-Lovato, C. H., Oliveira Paranhos, H. F., & de Souza, R. F. (2011) · Journal of Prosthodontics · doi:10.1111/j.1532-849x.2011.00719.x · Cited by 60
Denture base acrylic reinforced with high modulus fibre
Grave, A. M. H., Chandler, H. D., & Wolfaardt, J. F. (1985) · Dental Materials · doi:10.1016/s0109-5641(85)80015-4 · Cited by 54
Shinonaga, Y., & Arita, K. (2011) · Acta Biomaterialia · doi:10.1016/j.actbio.2011.09.017 · Cited by 45 · cited 1×
“Using a hybrid process of plasma-based ion implantation and deposition, Shinonaga and Arita introduced antibacterial properties to acrylic resins by incorporating fluorine and silver ions [15].”
MethodKopecký, F. (1996) · PubMed · Cited by 35
Regis, R. R., Vecchia, M. P. D., Pizzolitto, A. C., Compagnoni, M. A., Souza, P. P. C., & Souza, R. F. D. (2012) · Journal of Prosthodontics · doi:10.1111/j.1532-849x.2011.00815.x · Cited by 30
Proximal Caries Increment in Connection with Orthodontic Treatment with Removable Appliances
Bjerklin, K., Gärskog, B., & Rönnerman, A. (1983) · British Journal of Orthodontics · doi:10.1179/bjo.10.1.21 · Cited by 30
Zahra, E. V., De Wever, B., Decelis, S., Mallia, K., & Camilleri, S. (2011) · PubMed · Cited by 23
Yamamoto, K. (1995) · Analytica Chimica Acta · doi:10.1016/0003-2670(94)00428-o · Cited by 19 · cited 1×
“As the fluorescein staining test did not account for the amount of QAMS released into solution as an unbound component, the amount of leached QAMS into the aged solution used for storing the QAMS-containing acrylic was determined using the bromophenol blue assay [24,26].”
MethodSong, L. X., & Baney, R. H. (2010) · Textile Research Journal · doi:10.1177/0040517510380776 · Cited by 18 · cited 2×
“These deactivation processes are significantly enhanced in the presence of NaCl [51].”
BackgroundAnti-adhesive and antibacterial properties of a proprietary denture cleanser
Morgan, T. D., & Wilson, M. J. (2000) · Journal of Applied Microbiology · doi:10.1046/j.1365-2672.2000.01158.x · Cited by 16
Applied Biomedical Microbiology
(2009) · CRC Press eBooks · doi:10.1201/9780849375712 · Cited by 6
Tamura, K., Nakano, K., Miyake, S., Takada, A., & Ooshima, T. (2005) · Pediatric Dental Journal · doi:10.1016/s0917-2394(05)70056-2 · Cited by 5 · cited 1×
“Uncontrolled accumulation of bacterial and fungal biofilms on or surrounding dental devices may contribute to dental caries [2], periodontal disease [3], and chronic atrophic candidiasis [4].”
BackgroundMonticello, R. A., & White, W. C. (2009) · CRC Press eBooks · doi:10.1201/9780849375712.ch4 · Cited by 4
Monticello, R. A., & White, W. C. (2009) · CRC Press eBooks · doi:10.1201/9780849375712-7 · Cited by 2
Cited by
Jiao, Y., Niu, L.-N., Ma, S., Li, J., Tay, F. R., & Chen, J.-H. (2017) · Progress in Polymer Science · doi:10.1016/j.progpolymsci.2017.03.001 · Cited by 639
“However, recent studies of QA-containing materials conducted with confocal laser scanning microscopy and three-dimensional reconstruction of biofilms stained with live-dead fluorescent stains [350, 351] indicate that those materials possess a reducing spectrum of biocidal activities from the substrate surface to the t…”
BackgroundSelf-citationDental materials with antibiofilm properties
Wang, Z., Shen, Y., & Haapasalo, M. (2014) · Dental Materials · doi:10.1016/j.dental.2013.12.001 · Cited by 188
Incorporation of antimicrobial agents in denture base resin: A systematic review
An, S., Evans, J. L., Hamlet, S. M., & Love, R. M. (2020) · Journal of Prosthetic Dentistry · doi:10.1016/j.prosdent.2020.03.033 · Cited by 76
Zhou, H., Weir, M. D., Antonucci, J. M., Schumacher, G. E., Zhou, X.-D., & Xu, H. H. (2014) · International Journal of Oral Science · doi:10.1038/ijos.2014.18 · Cited by 73
Lee, B., Lee, C.-C., Lin, H., Shih, W.-A., Hsieh, W., Lai, C., Takeuchi, Y., & Chen, Y. (2016) · Carbohydrate Polymers · doi:10.1016/j.carbpol.2016.06.026 · Cited by 63
Metadata
- Authors
- Gong, S.-Q., Epasinghe, J., Rueggeberg, F. A., Niu, L.-N., Mettenberg, D., Yiu, C. K. Y., Blizzard, J. D., Wu, C. D., Mao, J., Drisko, C. L., Pashley, D. H., & Tay, F. R.
- Affiliations
- Georgia State University (US)
- Air Force Medical University (CN)
- University of Hong Kong (HK)
- University of Illinois Chicago (US)
- Tongji Hospital (CN)
- Corresponding author
- Mao, Jing
- Tay, Franklin R.
- Venue
- PLoS ONE
- Publisher
- Public Library of Science (PLoS)
- Published
- 2012-08-01
- Volume
- 7
- Issue
- 8
- Pages
- e42355
- ISSN
- 1932-6203 (ISSN-L)
- PMC
- PMC3411672
- OpenAlex
- W2055733391
- Cited by
- 53
- References
- 57
- Citations by year
- 2026: 2 · 2025: 2 · 2024: 4 · 2023: 2 · 2022: 3 · 2021: 4 · 2020: 6 · 2019: 4 · 2018: 5 · 2017: 3 · 2016: 5 · 2015: 3 · 2014: 5 · 2013: 5
- FWCI
- 5.86
- Type
- journal article
- Language
- en
- Open access
- gold
- doi.org
- Locations
- PLoS ONE (publishedVersion, cc-by)
- Europe PMC (PubMed Central) (publishedVersion, cc-by)
- PubMed Central (publishedVersion, cc-by)
- PubMed (publishedVersion)
- DOAJ (DOAJ: Directory of Open Access Journals) (submittedVersion)
- Figshare (submittedVersion, cc-by)
- The HKU Scholars Hub (University of Hong Kong) (submittedVersion, cc-by-nc-nd)
- Funders
- National Institute of Dental and Craniofacial Research (R01DE015306)
- Topics
- Health Sciences › Dentistry › General Dentistry › Dental materials and restorations
- Life Sciences › Immunology and Microbiology › Applied Microbiology and Biotechnology › Antimicrobial agents and applications
- Physical Sciences › Materials Science › Materials Chemistry › Silicone and Siloxane Chemistry
- Keywords
- organically modified silica, antimicrobial activity, antifungal activity, biofilm inhibition, Streptococcus mutans, Candida albicans, fracture toughness, water wettability, removable orthodontic appliances
- MeSH terms
- Acrylic Resins, Actinomyces, Anti-Infective Agents, Candida albicans, Orthodontic Appliances, Removable, Resins, Synthetic, Siloxanes, Streptococcus mutans
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.