CoChat

Polymer modulators in silicon photonics: review and projections

Open access

The DOI matches its Crossref record; 115 of the 116 references it cites were found in a registry or an index.

Abstract

Optical modulators are vital for many applications, including telecommunication, data communication, optical computing, and microwave photonic links. A compact modulator with low voltage drive requirement, low power, high speed, and compatibility with CMOS foundry process is highly desirable. Current modulator technologies in Si suffer from trade‐offs that constrain their power, performance (speed, drive voltage), and area. The introduction of additional materials to the silicon platform for efficient phase shift promises alternatives to relax those trade‐offs. Si‐organic‐hybrid (SOH) devices demonstrate large modulation bandwidth leveraging the electro‐optic (EO) effect and smaller drive voltage or footprint owing to a strong EO coefficient. In this study, we review various SOH modulators and describe their path towards integration to silicon, including their challenges associated with aging and temperature. We also briefly discuss other high‐performance modulators such as plasmonic‐organic‐hybrid (POH), photonic‐crystal‐assisted SOH, and LiNbO 3 .

Overview

The claims and statistics of this paper haven’t been checked yet.

Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.

A few free checks a day · papers already verified open instantly · results are public

Integrity signals

Registry

Crossref · 10.1515/nanoph-2022-0141

Cites

115 of 115 references verified0 citation errors · 0 not checkable

Statistics

Figures

Figure 1: Modulators categorized based on topology, material, and mechanism. Topology can radically change the way an RF signal modulates the light. Different materials make use of different mechanisms for modulation. Not all materials are easy to integrate into a CMOS SOI platform. Some mechanisms are ill-suited for high-speed modulation. Figure reproduced with permission from Optica ([14] [ITO]; [15] [VO2]; [16] [InP]; [17] [GeSi]; [18] [Silicon]; [19] [Lithium Niobate]; [20] [Liquid Crystal]).
Figure 1: Modulators categorized based on topology, material, and mechanism. Topology can radically change the way an RF signal modulates the light. Different materials make use of different mechanisms for modulation. Not all materials are easy to integrate into a CMOS SOI platform. Some mechanisms are ill-suited for high-speed modulation. Figure reproduced with permission from Optica ([14] [ITO]; [15] [VO2]; [16] [InP]; [17] [GeSi]; [18] [Silicon]; [19] [Lithium Niobate]; [20] [Liquid Crystal]).CC BY · PubMed Central
Figure 2: Trade-off between various FoMs for modulators: POH and LNOI modulators, although challenging to integrate to CMOS foundry process, are also shown for the sake of completeness. (a) Inverse of modulation efficiency versus BW. (b) Inverse of modulation efficiency versus energy efficiency, when only dynamic power consumption is taken into account. (c) Inverse of loss efficiency versus energy efficiency, when only dynamic power consumption is taken into account [46–48]. (d) achieving 1.6 Tb/s aggregate data rate by increasing the modulator Gbaud operation, modulation scheme and parallelism (number of fiber pairs × wavelength × polarization). Gbaud is limited to <1 for category I (e.g. LC, thermal, PCM, PTM and ITO), <50 for category II (FCD), <70 for category III (InP and GeSi EAM) but can reach 100 for category IV (LNOI and EOP). The advantages of SOH modulators over FCD are clearly seen. 1.6 Tb/s can be achieved using 50 Gbaud FCD modulators operating in PAM4 with either 16 fibers or 16 λ, or in 64QAM dual-polarization (DP) with 2 λ. With 100 Gbaud EOP modulators, 1.6 Tb/s can be realized in PAM4 with half the fibers or λs, or in 16QAM DP with 2 λ.
Figure 2: Trade-off between various FoMs for modulators: POH and LNOI modulators, although challenging to integrate to CMOS foundry process, are also shown for the sake of completeness. (a) Inverse of modulation efficiency versus BW. (b) Inverse of modulation efficiency versus energy efficiency, when only dynamic power consumption is taken into account. (c) Inverse of loss efficiency versus energy efficiency, when only dynamic power consumption is taken into account [46–48]. (d) achieving 1.6 Tb/s aggregate data rate by increasing the modulator Gbaud operation, modulation scheme and parallelism (number of fiber pairs × wavelength × polarization). Gbaud is limited to <1 for category I (e.g. LC, thermal, PCM, PTM and ITO), <50 for category II (FCD), <70 for category III (InP and GeSi EAM) but can reach 100 for category IV (LNOI and EOP). The advantages of SOH modulators over FCD are clearly seen. 1.6 Tb/s can be achieved using 50 Gbaud FCD modulators operating in PAM4 with either 16 fibers or 16 λ, or in 64QAM dual-polarization (DP) with 2 λ. With 100 Gbaud EOP modulators, 1.6 Tb/s can be realized in PAM4 with half the fibers or λs, or in 16QAM DP with 2 λ.CC BY · PubMed Central
Figure 3: Categorizing various waveguide structures based on light–matter interaction: Weak-field overlap [top]: (a) Non-slotted Si waveguide coated with EOP [37] in an MZM topology. Skinny waveguides (40 nm) increase leakage to improve field overlap. (b) An SWG-assisted version in a racetrack MRM topology [56]. Strong-field overlap [Bottom]: (c) Cross-section of a slot-waveguide MZM. Optical field mode confinement inside the slot and effective overlap with the RF mode field (inset) [50]. (d) Partially slotted waveguide utilized in a race-track MRM featuring a compact strip-to-slot mode converter, high modulation efficiency and quality factor compared to fully slotted MRM [57] (e) Segmented slot waveguides benefit from simpler (i.e. single etch). fabrication due to narrow fins carrying the electric signal for higher speed and lower IL operation [58]. EOP modulators with complicated manufacturing: (f) Photonic crystal (PC)-assisted slot-waveguides featuring enhanced modal field and wider slot width which can alleviate incomplete poling issues [59]. (g) A POH MRM infiltrated with EOP [52]. (h) A POH phase shifter used in an MZM with ultra-low energy consumption and large BW [40]. Figure reproduced with permission from [37], SpringerNature (a); [56], Wiley (b); [50], SpringerNature (c); [59], Optica (f); [52], Optica (g). Figure adapted with permission from [58], AIP (e); [57], SPIE (d); [40]; Science (h). Distributed under Creative Commonslicense CC BY 4.0.
Figure 3: Categorizing various waveguide structures based on light–matter interaction: Weak-field overlap [top]: (a) Non-slotted Si waveguide coated with EOP [37] in an MZM topology. Skinny waveguides (40 nm) increase leakage to improve field overlap. (b) An SWG-assisted version in a racetrack MRM topology [56]. Strong-field overlap [Bottom]: (c) Cross-section of a slot-waveguide MZM. Optical field mode confinement inside the slot and effective overlap with the RF mode field (inset) [50]. (d) Partially slotted waveguide utilized in a race-track MRM featuring a compact strip-to-slot mode converter, high modulation efficiency and quality factor compared to fully slotted MRM [57] (e) Segmented slot waveguides benefit from simpler (i.e. single etch). fabrication due to narrow fins carrying the electric signal for higher speed and lower IL operation [58]. EOP modulators with complicated manufacturing: (f) Photonic crystal (PC)-assisted slot-waveguides featuring enhanced modal field and wider slot width which can alleviate incomplete poling issues [59]. (g) A POH MRM infiltrated with EOP [52]. (h) A POH phase shifter used in an MZM with ultra-low energy consumption and large BW [40]. Figure reproduced with permission from [37], SpringerNature (a); [56], Wiley (b); [50], SpringerNature (c); [59], Optica (f); [52], Optica (g). Figure adapted with permission from [58], AIP (e); [57], SPIE (d); [40]; Science (h). Distributed under Creative Commonslicense CC BY 4.0.CC BY · PubMed Central
Figure 4: (a) Cross-section of a slot-waveguide infiltrated with EOP polymer. (b) Chromophore dipoles in polymer host. Dipoles are not aligned before poling [54]. (c) False-colored SEM image of the slot indicating almost-perfect infiltration of SEO125 polymer [97]. (d) Electrothermal poling set-up: under applied external (DC) field, the sample is heated at a determined rate (typically 10 °C/min) up to 95 °C and then stabilized for 10 additional minutes for each 10 °C of temperature increase. This is somewhat crucial to allow dipole orientation. Finally, the EOP sample reaches the glass temperature (T g). (e) While maintaining the poling field, the sample is cooled down to room temperature as rapidly as possible followed by removing the poling field. (f) Temperature and leakage current should be monitored during the poling procedure. Figure reproduced with permission from [32], ACS.
Figure 4: (a) Cross-section of a slot-waveguide infiltrated with EOP polymer. (b) Chromophore dipoles in polymer host. Dipoles are not aligned before poling [54]. (c) False-colored SEM image of the slot indicating almost-perfect infiltration of SEO125 polymer [97]. (d) Electrothermal poling set-up: under applied external (DC) field, the sample is heated at a determined rate (typically 10 °C/min) up to 95 °C and then stabilized for 10 additional minutes for each 10 °C of temperature increase. This is somewhat crucial to allow dipole orientation. Finally, the EOP sample reaches the glass temperature (T g). (e) While maintaining the poling field, the sample is cooled down to room temperature as rapidly as possible followed by removing the poling field. (f) Temperature and leakage current should be monitored during the poling procedure. Figure reproduced with permission from [32], ACS.CC BY · PubMed Central
Figure 5: (a) Poled polymers transition from their metastable (“1”) state to the relaxed state (“3”) at a rate controlled by the barrier height (h) [54]. (b) Extrapolation of normalized V π increase for two different EOP modulators for various temperatures. Figure reproduced with permission from [112], SPIE. (c) Normalized Q factors (dB) for OOK at 56, 100 and 110 Gb/s versus operating ambient temperature (25–110 °C). Inset: measured optical eye diagrams of 56 and 100 Gb/s at elevated temperature (105 °C) [37]. (d) Measured BERs of 200 Gb/s PAM4 versus operating ambient temperatures (22–110 °C). The solid red line represents the fitted curve. Inset: measured optical eye diagrams of 200 Gb/s PAM4 at elevated temperatures (100–110 °C) [37]. Distributed under Creative Commons license CC BY 4.0.
Figure 5: (a) Poled polymers transition from their metastable (“1”) state to the relaxed state (“3”) at a rate controlled by the barrier height (h) [54]. (b) Extrapolation of normalized V π increase for two different EOP modulators for various temperatures. Figure reproduced with permission from [112], SPIE. (c) Normalized Q factors (dB) for OOK at 56, 100 and 110 Gb/s versus operating ambient temperature (25–110 °C). Inset: measured optical eye diagrams of 56 and 100 Gb/s at elevated temperature (105 °C) [37]. (d) Measured BERs of 200 Gb/s PAM4 versus operating ambient temperatures (22–110 °C). The solid red line represents the fitted curve. Inset: measured optical eye diagrams of 200 Gb/s PAM4 at elevated temperatures (100–110 °C) [37]. Distributed under Creative Commons license CC BY 4.0.CC BY · PubMed Central

Verification

Claims the paper makes

The claims and statistics of this paper haven’t been checked yet.

Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.

A few free checks a day · papers already verified open instantly · results are public

Claims other papers make about this one

Each is checked against this paper’s own text: does it say what the citing paper says it does?

Self-check

Percentages, sums and reported differences re-computed from the paper’s own numbers.

The self-check needs the paper’s full text.

Citations

Cites

Show all 115 references

Research works printed but not linked: 8

  1. Ahmed A. H., 2019, 2019 IEEE International Solid‐State Circuits Conference‐(ISSCC), 484
  2. Sun J., 2018, Optical Fiber Communication Conference, Th4A
  3. Nikogosyan D. N., 2006, Nonlinear Optical Crystals: A Complete Survey
  4. Lebby M., 2019, ECOS Market Focus
  5. Yu G., 2011, CLEO: Science and Innovations, CTuN5
  6. Zhang W., 2016, 2016 21st OptoElectronics and Communications Conference (OECC) Held Jointly with 2016 International Conference on Photonics in Switching (PS), 1
  7. Hammond S. R., 2022, SPIE Photonics West
  8. K.Liu “Scaling for speed: the impact of polymer pics on optical roadmaps ”inPhotonic Integration Conference 2018.

Cited by

See all 96

Metadata

Authors
Taghavi, I., Moridsadat, M., Tofini, A., Raza, S., Jaeger, N. A. F., Chrostowski, L., Shastri, B. J., & Shekhar, S.
Affiliations
  • University of British Columbia (CA)
  • Queen's University (CA)
Corresponding author
Taghavi, Iman
Venue
Nanophotonics
Publisher
Wiley
Published
2022-07-15
Volume
11
Issue
17
Pages
3855-3871
ISSN
  • 2192-8606 (ISSN-L)
  • 2192-8614
OpenAlex
W4285589045
Cited by
78
References
116
Citations by year
2026: 20 · 2025: 24 · 2024: 22 · 2023: 9 · 2022: 3
FWCI
0.95
Type
journal article
Language
en
Open access
Licence
Locations
  • Nanophotonics (publishedVersion, cc-by)
  • PubMed Central (publishedVersion, cc-by)
  • PubMed (publishedVersion)
  • DOAJ (DOAJ: Directory of Open Access Journals) (submittedVersion, cc-by-sa)
Funders
Natural Sciences and Engineering Research Council of Canada
Topics
  • Physical Sciences › Engineering › Electrical and Electronic Engineering › Photonic and Optical Devices
  • Physical Sciences › Physics and Astronomy › Atomic and Molecular Physics, and Optics › Photorefractive and Nonlinear Optics
  • Physical Sciences › Physics and Astronomy › Atomic and Molecular Physics, and Optics › Plasmonic and Surface Plasmon Research
Keywords
silicon photonics, electro-optic effect, optical phase shifter, low driving voltage, modulation bandwidth, device aging, temperature dependence, lithium niobate modulator

About these checks

Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.

Statistics and arithmetic are recomputed, not judged.

Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.

What counts as a claim ›How we measure confidence ›How we check this ›

Are you an author, or do you see a problem with this page? Request a review

How to cite

Cite CoChat for the checks on this page, and the paper for its own findings.

This page
CoChat. (2026). Citation check: Polymer modulators in silicon photonics: review and projections. https://app.cochat.ai/papers/10.1515/nanoph-2022-0141
The paper
Taghavi, I., Moridsadat, M., Tofini, A., Raza, S., Jaeger, N. A. F., Chrostowski, L., Shastri, B. J., & Shekhar, S. (2022). Polymer modulators in silicon photonics: review and projections. Nanophotonics. https://doi.org/10.1515/nanoph-2022-0141

Data sources

Bibliographic data: Semantic Scholar, OpenAlex, Crossref.

Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).

Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.