The DOI matches its Crossref record; 34 of the 34 references it cites were found in a registry or an index.
Reliability and Concurrent Validity of Seven Commercially Available Devices for the Assessment of Movement Velocity at Different Intensities During the Bench Press
Open accessAbstract
Pérez-Castilla, A, Piepoli, A, Delgado-García, G, Garrido-Blanca, G, and García-Ramos, A. Reliability and concurrent validity of seven commercially available devices for the assessment of movement velocity at different intensities during the bench press. J Strength Cond Res 33(5): 1258–1265, 2019—The aim of this study was to compare the reliability and validity of 7 commercially available devices to measure movement velocity during the bench press exercise. Fourteen men completed 2 testing sessions. One-repetition maximum (1RM) in the bench press exercise was determined in the first session. The second testing session consisted of performing 3 repetitions against 5 loads (45, 55, 65, 75, and 85% of 1RM). The mean velocity was simultaneously measured using an optical motion sensing system (Trio-OptiTrack; “gold-standard”) and 7 commercially available devices: 1 linear velocity transducer (T-Force), 2 linear position transducers (Chronojump and Speed4Lift), 1 camera-based optoelectronic system (Velowin), 1 smartphone application (PowerLift), and 2 inertial measurement units (IMUs) (PUSH band and Beast sensor). The devices were ranked from the most to the least reliable as follows: (a) Speed4Lift (coefficient of variation [CV] = 2.61%); (b) Velowin (CV = 3.99%), PowerLift (3.97%), Trio-OptiTrack (CV = 4.04%), T-Force (CV = 4.35%), and Chronojump (CV = 4.53%); (c) PUSH band (CV = 9.34%); and (d) Beast sensor (CV = 35.0%). A practically perfect association between the Trio-OptiTrack system and the different devices was observed (Pearson's product-moment correlation coefficient (r) range = 0.947–0.995; p < 0.001) with the only exception of the Beast sensor (r = 0.765; p < 0.001). These results suggest that linear velocity/position transducers, camera-based optoelectronic systems, and the smartphone application could be used to obtain accurate velocity measurements for restricted linear movements, whereas the IMUs used in this study were less reliable and valid.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Progressive Statistics for Studies in Sports Medicine and Exercise Science
HOPKINS, W. G., MARSHALL, S. W., BATTERHAM, A. M., & HANIN, J. (2009) · Medicine & Science in Sports & Exercise · doi:10.1249/mss.0b013e31818cb278 · Cited by 9,128
Atkinson, G., & Nevill, A. M. (1998) · Sports Medicine · doi:10.2165/00007256-199826040-00002 · Cited by 3,779
Velocity Loss as an Indicator of Neuromuscular Fatigue during Resistance Training
SÁNCHEZ-MEDINA, L., & GONZÁLEZ-BADILLO, J. J. (2011) · Medicine & Science in Sports & Exercise · doi:10.1249/mss.0b013e318213f880 · Cited by 852
Movement Velocity as a Measure of Loading Intensity in Resistance Training
González-Badillo, J. J., & Sánchez-Medina, L. (2010) · International Journal of Sports Medicine · doi:10.1055/s-0030-1248333 · Cited by 788 · cited 2×
“lift or by a set of repetitions to failure, the load can be prescribed to match the desired velocity (17,34).”
Reliability of Measures Obtained During Single and Repeated Countermovement Jumps
Cormack, S. J., Newton, R. U., McGuigan, M. R., & Doyle, T. L. A. (2008) · International Journal of Sports Physiology and Performance · doi:10.1123/ijspp.3.2.131 · Cited by 730
Pareja‐Blanco, F., Rodríguez‐Rosell, D., Sánchez‐Medina, L., Sanchis‐Moysi, J., Dorado, C., Mora‐Custodio, R., Yáñez‐García, J. M., Morales‐Alamo, D., Pérez‐Suárez, I., Calbet, J. A. L., et al. (2017) · Scandinavian Journal of Medicine & Science in Sports · doi:10.1111/sms.12678 · Cited by 505
Importance of the Propulsive Phase in Strength Assessment
Sanchez-Medina, L., Perez, C. E., & Gonzalez-Badillo, J. J. (2010) · International Journal of Sports Medicine · doi:10.1055/s-0029-1242815 · Cited by 454
Velocity- and Power-Load Relationships of the Bench Pull vs. Bench Press Exercises
Sánchez-Medina, L., González-Badillo, J., Pérez, C., & Pallarés, J. (2013) · International Journal of Sports Medicine · doi:10.1055/s-0033-1351252 · Cited by 289
A Brief Review of Strength and Ballistic Assessment Methodologies in Sport
McMaster, D. T., Gill, N., Cronin, J., & McGuigan, M. (2014) · Sports Medicine · doi:10.1007/s40279-014-0145-2 · Cited by 264
Movement velocity as a measure of exercise intensity in three lower limb exercises
Conceição, F., Fernandes, J., Lewis, M., Gonzaléz-Badillo, J. J., & Jimenéz-Reyes, P. (2016) · Journal of Sports Sciences · doi:10.1080/02640414.2015.1090010 · Cited by 234
Cited by
Ranchal-Sanchez, A., Diaz-Bernier, V. M., De La Florida-Villagran, C. A., Llorente-Cantarero, F. J., Campos-Perez, J., & Jurado-Castro, J. M. (2020) · Nutrients · doi:10.3390/nu12071912 · Cited by 63
Morning versus evening intake of creatine in elite female handball players
Jurado-Castro, J. M., Campos-Pérez, J., Vilches-Redondo, M. Á., Mata, F., Navarrete-Pérez, A., & Ranchal-Sanchez, A. (2021) · International Journal of Environmental Research and Public Health · doi:10.3390/ijerph19010393 · Cited by 10
Metadata
- Authors
- Pérez-Castilla, A., Piepoli, A., Delgado-García, G., Garrido-Blanca, G., & García-Ramos, A.
- Venue
- Journal of Strength and Conditioning Research
- Published
- 2019-05
- Volume
- 33
- Issue
- 5
- Pages
- 1258-1265
- ISSN
- 1064-8011 (ISSN-L)
- OpenAlex
- W2923371000
- Cited by
- 288
- References
- 34
- FWCI
- 29.15
- Type
- journal article
- Language
- en
- Open access
- green
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: Reliability and Concurrent Validity of Seven Commercially Available Devices for the Assessment of Movement Velocity at Different Intensities During the Bench Press. https://app.cochat.ai/papers/10.1519/jsc.0000000000003118
- The paper
- Pérez-Castilla, A., Piepoli, A., Delgado-García, G., Garrido-Blanca, G., & García-Ramos, A. (2019). Reliability and Concurrent Validity of Seven Commercially Available Devices for the Assessment of Movement Velocity at Different Intensities During the Bench Press. Journal of Strength and Conditioning Research. https://doi.org/10.1519/jsc.0000000000003118
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.