The DOI matches its Crossref record; 3 of the 3 references it cites were found in a registry or an index.
Movement Velocity as a Measure of Loading Intensity in Resistance Training
Abstract
This study examined the possibility of using movement velocity as an indicator of relative load in the bench press (BP) exercise. One hundred and twenty strength-trained males performed a test (T1) with increasing loads for the individual determination of the one-repetition maximum (1RM) and full load-velocity profile. Fifty-six subjects performed the test on a second occasion (T2) following 6 weeks of training. A very close relationship between mean propulsive velocity (MPV) and load (%1RM) was observed (R (2)=0.98). Mean velocity attained with 1RM was 0.16+/-0.04 m x s(-1) and was found to influence the MPV attained with each %1RM. Despite a mean increase of 9.3% in 1RM from T1 to T2, MPV for each %1RM remained stable. Stability in the load-velocity relationship was also confirmed regardless of individual relative strength. These results confirm an inextricable relationship between relative load and MPV in the BP that makes it possible to: 1) evaluate maximal strength without the need to perform a 1RM test, or test of maximum number of repetitions to failure (XRM); 2) determine the %1RM that is being used as soon as the first repetition with any given load is performed; 3) prescribe and monitor training load according to velocity, instead of percentages of 1RM or XRM.
Overview
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
Claims other papers make about this one
Each is checked against this paper’s own text: does it say what the citing paper says it does?
In the citing paper
“Several researchers have highlighted strong relationships between load and movement velocity, with the assessment of strength qualities being load-velocity specific [15, 16].”
From Comparison of weightlifting, traditional resistance training and plyometrics on strength, power and speed: a systematic review with meta-analysis. (2022) · cites this paper as [16]
Citations
Cites
The heat of shortening and the dynamic constants of muscle
Hill, A. V. (1938) · Proceedings of the Royal Society of London. Series B - Biological Sciences · doi:10.1098/rspb.1938.0050 · Cited by 3,669
Kinematics, Kinetics, and Muscle Activation during Explosive Upper Body Movements
Newton, R. U., Kraemer, W. J., Häkkinen, K., Humphries, B. J., & Murphy, A. J. (1996) · Journal of Applied Biomechanics · doi:10.1123/jab.12.1.31 · Cited by 359
Effect of training on the relationship between maximal and submaximal strength
BRAITH, R. W., GRAVES, J. E., LEGGETT, S. H., & POLLOCK, M. L. (1993) · Medicine & Science in Sports & Exercise · doi:10.1249/00005768-199301000-00018 · Cited by 183
Cited by
Velocity Loss as an Indicator of Neuromuscular Fatigue during Resistance Training
SÁNCHEZ-MEDINA, L., & GONZÁLEZ-BADILLO, J. J. (2011) · Medicine & Science in Sports & Exercise · doi:10.1249/mss.0b013e318213f880 · Cited by 852
Self-citationPareja‐Blanco, F., Rodríguez‐Rosell, D., Sánchez‐Medina, L., Sanchis‐Moysi, J., Dorado, C., Mora‐Custodio, R., Yáñez‐García, J. M., Morales‐Alamo, D., Pérez‐Suárez, I., Calbet, J. A. L., et al. (2017) · Scandinavian Journal of Medicine & Science in Sports · doi:10.1111/sms.12678 · Cited by 505
Self-citationVelocity-Based Training: From Theory to Application
Weakley, J., Mann, B., Banyard, H., McLaren, S., Scott, T., & Garcia-Ramos, A. (2021) · Strength & Conditioning Journal · doi:10.1519/ssc.0000000000000560 · Cited by 460
“Sanchez-Medina L, Perez C, Gonzalez- Badillo J. Importance of the propulsive phase in strength assessment.”
BackgroundMethodInfluentialReliability and Validity of the Load–Velocity Relationship to Predict the 1RM Back Squat
Banyard, H. G., Nosaka, K., & Haff, G. G. (2017) · Journal of Strength and Conditioning Research · doi:10.1519/jsc.0000000000001657 · Cited by 301
“However, even though mean propulsive velocity has been shown to be a key variable in many studies (8,11,27,28), it is also noted that it may add an unnecessary level of complexity to velocity measurements for strength and conditioning practitioners (27).”
Pérez-Castilla, A., Piepoli, A., Delgado-García, G., Garrido-Blanca, G., & García-Ramos, A. (2019) · Journal of Strength and Conditioning Research · doi:10.1519/jsc.0000000000003118 · Cited by 288
“lift or by a set of repetitions to failure, the load can be prescribed to match the desired velocity (17,34).”
Metadata
- Authors
- González-Badillo, J. J., & Sánchez-Medina, L.
- Venue
- International Journal of Sports Medicine
- Publisher
- Georg Thieme Verlag KG
- Published
- 2010-02-23
- Volume
- 31
- Issue
- 05
- Pages
- 347-352
- ISSN
- 0172-4622 (ISSN-L)
- 1439-3964
- OpenAlex
- W2001289296
- Cited by
- 788
- References
- 3
- Citations by year
- 2026: 92 · 2025: 70 · 2024: 72 · 2023: 71 · 2022: 84 · 2021: 79 · 2020: 89 · 2019: 53 · 2018: 43 · 2017: 55 · 2016: 27 · 2015: 18 · 2014: 11 · 2013: 8 · 2012: 11
- FWCI
- 7.70
- Type
- journal article
- Language
- en
- Open access
- closed
- Locations
- International Journal of Sports Medicine (publishedVersion)
- PubMed (publishedVersion)
- Topics
- Health Sciences › Medicine › Orthopedics and Sports Medicine › Sports Performance and Training
- Health Sciences › Medicine › Physiology (medical) › Cardiovascular and exercise physiology
- Physical Sciences › Engineering › Biomedical Engineering › Sports Dynamics and Biomechanics
- Keywords
- movement speed, load-velocity relationship, resistance training, bench press, one-repetition maximum, maximal strength, training load monitoring, training load prescription
- MeSH terms
- Adult, Biomechanical Phenomena, Exercise Test, Humans, Male, Movement, Task Performance and Analysis, Weight Lifting, Weight-Bearing, Muscle Strength, Resistance Training, Young Adult
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: Movement Velocity as a Measure of Loading Intensity in Resistance Training. https://app.cochat.ai/papers/10.1055/s-0030-1248333
- The paper
- González-Badillo, J. J., & Sánchez-Medina, L. (2010). Movement Velocity as a Measure of Loading Intensity in Resistance Training. International Journal of Sports Medicine. https://doi.org/10.1055/s-0030-1248333
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.