CoChat

Application of Thermogravimetric Analysis for the Proximate Analysis of Livestock Wastes

Cantrell, Keri B., Martin, Jerry H., Ro, Kyoung S. · 2010 · Journal of ASTM International
Cited by 45

The DOI matches its Crossref record; 1 of the 1 references it cites were found in a registry or an index.

Abstract

There is worldwide interest in deriving increasing amounts of energy from bio-based agricultural materials including not only lignocellulosic residues but also a significant quantity of available livestock manure. This manure can be used as a feedstock for various thermochemical conversion processes such as pyrolysis and gasification. In order to apply these processes, the manure must be properly characterized for volatile matter (VM) and ash contents. The determination of these components is not mentioned specifically in current ASTM standards for livestock manure. In this study, we employed the use of thermogravimetric analysis (TGA) for the rapid assessment of VM and ash content in swine, dairy, rabbit, and poultry manures using references from the ASTM coal and coke standards. The TGA assessment of VM in the manures were the same as those values found by non-automated means (ASTM D3175-07) ranging from 47 to 78 wt%db. The TGA assessment of the ash was also the same when compared to ash results via non-instrumental means following ASTM D3174-04. Ash values ranged from 4 to 47 wt%db. There was one exception when testing a high ash containing swine lagoon sludge. Under the TGA method, this sludge underwent more complete devolatilization and oxidation. This was primarily attributed to the small sample size leading to uniform internal heating. The modification of the TGA ash method aimed at shortening the run time generated similar results as both the original TGA method and non-automated method. Thus, TGA ash determination in manure should occur above 600°C with preferences for the following method: Zero-grade air at 2–4 furnace volumes/min, heating rate of 11°C⋅min−1, temperature range of 110–950°C, and isothermal hold at 950°C for 10 min. VM determination via TGA should follow ASTM D3175-07.

Overview

The claims and statistics of this paper haven’t been checked yet.

Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.

A few free checks a day · papers already verified open instantly · results are public

Integrity signals

Registry

Crossref · 10.1520/jai102583

Cites

1 of 1 references verified0 citation errors · 0 not checkable

Statistics

Verification

Claims the paper makes

The claims and statistics of this paper haven’t been checked yet.

Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.

A few free checks a day · papers already verified open instantly · results are public

Self-check

Percentages, sums and reported differences re-computed from the paper’s own numbers.

The self-check needs the paper’s full text.

Citations

Cites

Cited by

See all 45

Metadata

Authors
Cantrell, K. B., Martin, J. H., & Ro, K. S.
Venue
Journal of ASTM International
Published
2010-03-01
Volume
7
Issue
3
Pages
1-13
ISSN
1546-962X (ISSN-L)
OpenAlex
W2008329347
Cited by
45
References
1
FWCI
1.27
Type
journal article
Language
en
Open access
closed

About these checks

Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.

Statistics and arithmetic are recomputed, not judged.

Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.

What counts as a claim ›How we measure confidence ›How we check this ›

Are you an author, or do you see a problem with this page? Request a review

Data sources

Bibliographic data: Semantic Scholar, OpenAlex, Crossref.

Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).

Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.