The DOI matches its Crossref record; 30 of the 32 references it cites were found in a registry or an index; none of the 21 sources its claims cite is checked for support yet.
Adsorption of cadmium by magnesium-modified biochar at different pyrolysis temperatures
Open accessAbstract
Metal pollution in soil is an increasing concern. Cadmium poses significant risks to ecosystems, and methodologies for its removal, including adsorption, have been researched. There are several environmentally friendly adsorbing materials (such as Biochar) for Cd removal. In this study, to improve the adsorptive capacity of Cd, coconut and peanut shells were used as raw materials to prepare Biochar at 300 °C and 600 °C. The effects of the pyrolysis temperature and material type on the physicochemical properties of the adsorbents were investigated by elemental analysis, scanning electron microscopy, and Fourier transform infrared spectroscopy. Magnesium-loaded BC was synthesized to determine its Cd2+ absorptivity. The adsorption characteristics and mechanisms of Cd2+ in an aqueous phase were studied through batch adsorption experiments. The results demonstrated that the pseudo-second-order kinetics model accurately described the adsorption kinetics of adsorbents of Cd2+. The adsorption behavior of the Cd2+ adsorbent conforms to the single layer adsorption described by the Langmuir model. Adsorption of Cd2+ involves a spontaneous endothermic process. The initial pH of the solution greatly influenced the adsorption of Cd2+ and showed a trend of rapid growth and then slow growth. Thus, magnesium-modified biomass carbon has good potential for applications in pollutant remediation.
Overview
CoChat Summary
TL;DR
This study found that magnesium modification and higher pyrolysis temperature improved the Cd²⁺ adsorption performance of coconut-shell and peanut-shell biochars. The best-performing adsorbent reported was 600 MHBC, with a maximum adsorption capacity of 75.35 mg·g⁻¹, and Cd²⁺ uptake was best described by the pseudo-second-order kinetic and Langmuir isotherm models.
Key findings
- Mg modification increased surface area and pore volume: for example, BET surface area rose from 25.60 m²·g⁻¹ in 300 YBC to 79.95 m²·g⁻¹ in 300 MYBC, and from 34.00 m²·g⁻¹ in 300 HBC to 184.71 m²·g⁻¹ in 600 MHBC.
- Kinetic fitting showed the pseudo-second-order model fit best for Cd²⁺ adsorption, with higher R² values than the pseudo-first-order model across samples (e.g., 300 YBC: 0.9995 vs 0.9798; 600 MHBC: 0.9993 vs 0.9457).
- The paper reports a maximum adsorption capacity of 75.35 mg·g⁻¹ for the modified carbon material, and states that modified carbon adsorbed more Cd²⁺ than original carbon.
- Adsorption increased with initial Cd²⁺ concentration up to about 80 mg·L⁻¹ and reached equilibrium above 100 mg·L⁻¹; adsorption also increased with higher temperature and higher pH.
Methods
- Biochars were prepared from coconut shell and peanut shell at 300 or 600 °C under N₂, then some were Mg-modified using 0.1 M MgCl₂ impregnation and additional carbonization; samples were labeled YBC/HBC and MYBC/MHBC.
- Batch adsorption tests were run in 100 mL bottles with 0.05 g adsorbent, 25 mL Cd²⁺ solution, 200 rpm shaking for 24 h at 25 ± 1 °C; kinetic tests sampled multiple time points up to 1440 min, and isotherms were measured at 298, 308, and 318 K over 20–200 mg·L⁻¹ Cd²⁺.
- Data were analyzed by fitting pseudo-first-order, pseudo-second-order, intra-particle diffusion, Langmuir, and Freundlich models; characterization used SEM, FTIR, BET, elemental analysis, XRD, and EDS.
Limitations
- The paper does not report sample sizes beyond triplicate adsorption experiments, and it provides no statistical inference beyond fitted R² and parameter values.
- The text makes evident that some tables are incomplete or inconsistently rendered in the provided version (e.g., Table 3 and portions of Table 5), which limits exact extraction of all reported parameters; this is evident from the text.
- Although the authors state that MBC has “great potential” for remediation, the study is limited to controlled aqueous batch experiments and does not test field-scale soil remediation performance; this is evident from the text.
Model-written summary. Check it against the paper before relying on it.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
0 Valid · 0 Not valid · 18 Not checked · 74 Own results and interpretations
A result the paper reports from its own data — it cites no other source for it, so there is none to check. The quote shows it is in the paper.
In the paper
“The broad peak of coconut shell BC was observed at 3423 cm -1 , which corresponds to the stretching vibration of hydroxyl (-OH).”
plainstates an association- Asserted: passes — The authors put it forward as true.
- Checkable: passes — It can be checked against evidence.
- Load-bearing: unclear — It is unclear whether the paper’s conclusions depend on it.
- Based: passes — The paper gives a reason why it holds.
A result the paper reports from its own data — it cites no other source for it, so there is none to check. The quote shows it is in the paper.
In the paper
“Comparing the fitting coefficients R 2 of the two models, the fitting parameters R 2 of the Langmuir model were larger than that of the Freundlich model”
plainstates an association- Asserted: passes — The authors put it forward as true.
- Checkable: passes — It can be checked against evidence.
- Load-bearing: passes — The paper’s conclusions depend on it.
- Based: passes — The paper gives a reason why it holds.
A result the paper states — it cites no source for it, so there is none to check. The quote shows it is in the paper.
In the paper
“The absorption peak of coconut shell BC decreased when the temperature rose to 600 ℃.”
plainstates a cause- Asserted: passes — The authors put it forward as true.
- Checkable: passes — It can be checked against evidence.
- Load-bearing: unclear — It is unclear whether the paper’s conclusions depend on it.
- Based: passes — The paper gives a reason why it holds.
A result the paper reports from its own data — it cites no other source for it, so there is none to check. The quote shows it is in the paper.
In the paper
“The results demonstrated that the pseudo-second-order kinetics model accurately described the adsorption kinetics of adsorbents of Cd 2+ .”
boostedstates an association- Asserted: passes — The authors put it forward as true.
- Checkable: passes — It can be checked against evidence.
- Load-bearing: passes — The paper’s conclusions depend on it.
- Based: passes — The paper gives a reason why it holds.
A result the paper reports from its own data — it cites no other source for it, so there is none to check. The quote shows it is in the paper.
In the paper
“The kinetic adsorption process of the unmodified and magnesium-modified materials was in good agreement with the pseudo-second-order kinetic model.”
plainstates an association- Asserted: passes — The authors put it forward as true.
- Checkable: passes — It can be checked against evidence.
- Load-bearing: passes — The paper’s conclusions depend on it.
- Based: passes — The paper gives a reason why it holds.
47 more claims
Create a free account to see all 92 claims and to verify the 21 references still open.
- It may state two separate claims as one. 35
- Probably not a substantial claim. 5
- The quote only partly states this claim. 2
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
Each contradiction between two passages listed here was confirmed by an independent check.
Rated minor: it would not touch a result — a value no result rests on, a p-value that stays on the same side of the significance level, or a conflict that is clerical, resolved elsewhere in the paper, or outside its own findings.
In the paper
§ Adsorption isotherm
“the fitting parameters R 2 of the Langmuir model were larger than that of the Freundlich model”
§ Adsorption isotherm
“| 300 MYBC | 308 | 2.11 ± 0.65 | 0.5931 ± 0.0682 | 0.9879 | 57.55 ± 5.07 | 0.0133 ± 0.0025 | 0.9668 | | 300 MYBC | 318 | 3.14 ± 0.97 | 0.5751 ± 0.0683 | 0.9855 | 76.61 ± 6.88 | 0.0142 ± 0.0028 | 0.9638 |”
Rated minor: it would not touch a result — a value no result rests on, a p-value that stays on the same side of the significance level, or a conflict that is clerical, resolved elsewhere in the paper, or outside its own findings.
In the paper
§ Sorbent Properties
“After Mg modification, the specific surface area and pore volume of raw carbon increased, but the average void width decreased compared with the raw carbon.”
§ Sorbent Properties
“| 0.01 | 0.01 | 0.15 | 0.05 | 0.051 | 0.02 | 0.084 | 0.09 | Total pore volume (cc•g -1 ) |”
Rated minor: it would not touch a result — a value no result rests on, a p-value that stays on the same side of the significance level, or a conflict that is clerical, resolved elsewhere in the paper, or outside its own findings.
In the paper
§ Adsorption isotherm
“ΔG 0 decreased with the increase of temperature”
§ Adsorption isotherm
“| 600 YBC | -6.19749 | -6.7761 | -6.740356 | 1.7889 | 0.02714 | 0.4017 |”
Rated minor: it would not touch a result — a value no result rests on, a p-value that stays on the same side of the significance level, or a conflict that is clerical, resolved elsewhere in the paper, or outside its own findings.
In the paper
§ BC Preparation
“poultry manure pyrolyzed at 600 ℃ (600 HBC)”
§ BC Preparation
“peanut shell pyrolyzed at 600 ℃ and doped with MgCl2 (600 MHBC)”
Rated minor: it would not touch a result — a value no result rests on, a p-value that stays on the same side of the significance level, or a conflict that is clerical, resolved elsewhere in the paper, or outside its own findings.
In the paper
§ Adsorption isotherm
“The maximum adsorption capacity of the modified carbon material was greater than that of original carbon.”
§ Adsorption isotherm
“| 300 MYBC | 298 | 1.30 ± 0.24 | 0.6555 ± 0.0401 | 0.9752 | 60.04 ± 11.27 | 0.0082 ± 0.0027 | 0.9903 |”
2 more findings
Create a free account to see every finding of this check.
Citations
Cites
Biochar as a sorbent for contaminant management in soil and water: A review
Ahmad, M., Rajapaksha, A. U., Lim, J. E., Zhang, M., Bolan, N., Mohan, D., Vithanage, M., Lee, S. S., & Ok, Y. S. (2014) · Chemosphere · doi:10.1016/j.chemosphere.2013.10.071 · Cited by 4,662 · cited 2×
“A higher number of oxygen-functional groups results in stronger cation exchange ability and stronger adsorptive capacity of Cd2+ (Ahmad et al. 2013).”
BackgroundThe forms of alkalis in the biochar produced from crop residues at different temperatures
Yuan, J.-H., Xu, R.-K., & Zhang, H. (2011) · Bioresource Technology · doi:10.1016/j.biortech.2010.11.018 · Cited by 2,029 · cited 1×
“The peak at 1567 cm-1 represents the antisymmetric stretching of -COO (Yuan et al. 2011).”
BackgroundBeesley, L., Moreno-Jiménez, E., Gomez-Eyles, J. L., Harris, E., Robinson, B., & Sizmur, T. (2011) · Environmental Pollution · doi:10.1016/j.envpol.2011.07.023 · Cited by 1,610 · cited 1×
“Meanwhile, due to its rich fixed carbon, it can improve the carbon content in the soil and improve the physical and chemical properties of the soil (Beesley et al. 2011).”
BackgroundRajapaksha, A. U., Chen, S. S., Tsang, D. C. W., Zhang, M., Vithanage, M., Mandal, S., Gao, B., Bolan, N. S., & Ok, Y. S. (2016) · Chemosphere · doi:10.1016/j.chemosphere.2016.01.043 · Cited by 1,322 · cited 1×
“Therefore, it is necessary to modify the microstructure and surface properties of BC to enhance its remediation ability (Rajapaksha et al. 2016; Fang et al. 2018).”
BackgroundTang, W.-W., Zeng, G.-M., Gong, J.-L., Liang, J., Xu, P., Zhang, C., & Huang, B.-B. (2014) · Science of The Total Environment · doi:10.1016/j.scitotenv.2013.09.044 · Cited by 805 · cited 1×
“Studies have focused on the synthesis of carbon-based binary metal oxide composites for removing heavy metals from aqueous solutions (Tang et al. 2014).”
BackgroundYao, Y., Gao, B., Chen, J., & Yang, L. (2013) · Environmental Science & Technology · doi:10.1021/es4012977 · Cited by 787 · cited 1×
“However, the ability of BC to remove contaminants from aqueous solutions is limited (Yao et al. 2013).”
BackgroundHouben, D., Evrard, L., & Sonnet, P. (2013) · Chemosphere · doi:10.1016/j.chemosphere.2013.03.055 · Cited by 726 · cited 1×
“With increasing pH, the negative charge on the surface of carbon increases (Houben et al. 2013), and the electrostatic attraction of Cd2+ increases.”
BackgroundPreparation and characterization of a novel magnetic biochar for arsenic removal
Zhang, M., Gao, B., Varnoosfaderani, S., Hebard, A., Yao, Y., & Inyang, M. (2013) · Bioresource Technology · doi:10.1016/j.biortech.2012.11.132 · Cited by 687 · cited 1×
“Improvements are reflected in the large number of engineered BCs with novel structures and surface properties (Zhang et al. 2013; Song et al. 2014).”
BackgroundBiochar from anaerobically digested sugarcane bagasse
Inyang, M., Gao, B., Pullammanappallil, P., Ding, W., & Zimmerman, A. R. (2010) · Bioresource Technology · doi:10.1016/j.biortech.2010.06.088 · Cited by 473 · cited 1×
“768 materials that have characteristics similar to that of activated carbon (C) materials but are cost efficient and environmentally friendly (Inyang et al. 2010).”
BackgroundKadirvelu, K., & Namasivayam, C. (2003) · Advances in Environmental Research · doi:10.1016/s1093-0191(02)00018-7 · Cited by 470 · cited 1×
“Biomass carbon mainly depends on the electrostatic adsorption of heavy metal ions in solution (Kadirvelu and Namasivayam 2004).”
Background
Cited by
Yin, G., Tao, L., Chen, X., Bolan, N. S., Sarkar, B., Lin, Q., & Wang, H. (2021) · Journal of Hazardous Materials · doi:10.1016/j.jhazmat.2021.126487 · Cited by 158
“Cadmium (Cd) in wastewater is an environmental concern because the element is non-biodegradable, and poses risks to human health through the food chain and drinking water contamination (Chen et al., 2020; Lian et al., 2020).”
InfluentialRemediation of cadmium or arsenic contaminated water and soil by modified biochar: A review
Zhang, K., Yi, Y., & Fang, Z. (2022) · Chemosphere · doi:10.1016/j.chemosphere.2022.136914 · Cited by 109
Gusiatin, Z. M., & Rouhani, A. (2023) · Materials · doi:10.3390/ma16237342 · Cited by 53
“It is a carbon-based porous substance generated by pyrolyzing biomass waste at varying temperatures and oxygen supplies [70].”
BackgroundInfluentialZhang, Y., Zhang, H., Zhang, A., Héroux, P., Sun, Z., & Liu, Y. (2023) · Chemical Engineering Journal · doi:10.1016/j.cej.2023.141406 · Cited by 33
Lartey‐Young, G., Ma, L., Zhang, W., & Yao, G. (2023) · Environmental Sciences Europe · doi:10.1186/s12302-023-00725-4 · Cited by 29
Metadata
- Authors
- Chen, Y., Shan, R., & Sun, X.
- Affiliations
- Qufu Normal University
- Qufu Normal University (CN)
- Corresponding author
- Shan, Ruifeng
- ORCID
- Sun, Xiaoyin
- Venue
- BioResources
- Publisher
- BioResources
- Published
- 2019-12-11
- Volume
- 15
- Issue
- 1
- Pages
- 767-786
- ISSN
- 1930-2126 (ISSN-L)
- OpenAlex
- W3008178130
- Cited by
- 23
- References
- 32
- Citations by year
- 2026: 3 · 2025: 3 · 2024: 3 · 2023: 7 · 2022: 2 · 2021: 2 · 2020: 2 · 2019: 1
- FWCI
- 0.63
- Type
- journal article
- Language
- en
- Open access
- gold
- doi.org
- Licence
- cc-by
- Locations
- BioResources (publishedVersion, cc-by)
- Funders
- National Natural Science Foundation of China (41501542)
- Topics
- Physical Sciences › Environmental Science › Water Science and Technology › Adsorption and biosorption for pollutant removal
- Physical Sciences › Environmental Science › Environmental Engineering › Environmental remediation with nanomaterials
- Physical Sciences › Environmental Science › Pollution › Heavy metals in environment
- Keywords
- cadmium adsorption, magnesium-modified biochar, pyrolysis temperature, coconut shell, peanut shell, biomass-derived carbon, pseudo-second-order kinetics, Langmuir isotherm, pH effect on adsorption, endothermic adsorption, soil metal pollution, heavy metal removal from water
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
A language model drew the claims from the paper on 2026-10-11, under version 3 of the claim definition (model deepseek-v4.1-flash, prompt extract-v3).
A second model labelled each claim on 2026-10-11 (model jev-1.13-20260917, definition revision gold-guideline-v0.2).
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: Adsorption of cadmium by magnesium-modified biochar at different pyrolysis temperatures. https://app.cochat.ai/papers/10.15376/biores.15.1.767-786
- The paper
- Chen, Y., Shan, R., & Sun, X. (2019). Adsorption of cadmium by magnesium-modified biochar at different pyrolysis temperatures. BioResources. https://doi.org/10.15376/biores.15.1.767-786
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.