The DOI matches its Crossref record; 5 of the 5 references it cites were found in a registry or an index.
Mechanical properties of nanophase TiO2 as determined by nanoindentation
Abstract
Nanoindenter techniques have been used to determine the hardness. Young's modulus, and strain rate sensitivity of nanophase TiO 2, which is currently available only in very small quantities and which cannot be tested by most conventional techniques. Hardness and Young's modulus both increase linearly with sintering temperature over the range 25–900°C but come to within only 50–70% of the single crystal values. Strain rate sensitivity, on the other hand, is measurably greater for this material than for single crystal rutile, and the value of strain rate sensitivity increases as the grain size and the sintering temperature are decreased. In its as-compacted form, the strain rate sensitivity of nanophase TiO 2 is approximately a quarter that of lead at room temperature, indicating a potential for significant ductility in these ceramic materials. Finally, a significant scatter in hardness values has been detected within individual nanophase samples. This is interpreted as arising from microstructural inhomogeneity in these materials.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
A method for interpreting the data from depth-sensing indentation instruments
Doerner, M. F., & Nix, W. D. (1986) · Journal of Materials Research · doi:10.1557/jmr.1986.0601 · Cited by 2,863
Self-citationCeramics ductile at low temperature
Karch, J., Birringer, R., & Gleiter, H. (1987) · Nature · doi:10.1038/330556a0 · Cited by 926
Synthesis, characterization, and properties of nanophase TiO2
Siegel, R. W., Ramasamy, S., Hahn, H., Li, Z., Ting, L., & Gronsky, R. (1988) · Journal of materials research/Pratt's guide to venture capital sources · doi:10.1557/jmr.1988.1367 · Cited by 396
Self-citationSintering characteristics of nanocrystalline TiO2
Hahn, H., Logas, J., & Averback, R. S. (1990) · Journal of materials research/Pratt's guide to venture capital sources · doi:10.1557/jmr.1990.0609 · Cited by 337
Deformation of PbSn eutectic alloys at relatively high strain rates
Grivas, D., Murty, K. L., & Morris, J. W., Jr. (1979) · Acta Metallurgica · doi:10.1016/0001-6160(79)90106-8 · Cited by 82
Cited by
Measurement of Thin Film Mechanical Properties Using Nanoindentation
Pharr, G. M., & Oliver, W. C. (1992) · MRS Bulletin · doi:10.1557/s0883769400041634 · Cited by 1,012
Nanocrystalline materials and coatings
Tjong, S. C., & Chen, H. (2004) · Materials Science and Engineering: R: Reports · doi:10.1016/j.mser.2004.07.001 · Cited by 928
Müller, K., Bugnicourt, E., Latorre, M., Jorda, M., Echegoyen Sanz, Y., Lagaron, J., Miesbauer, O., Bianchin, A., Hankin, S., Bölz, U., et al. (2017) · Nanomaterials · doi:10.3390/nano7040074 · Cited by 746
Nanoscale effects leading to non-Einstein-like decrease in viscosity
Mackay, M. E., Dao, T. T., Tuteja, A., Ho, D. L., Van Horn, B., Kim, H.-C., & Hawker, C. J. (2003) · Nature Materials · doi:10.1038/nmat999 · Cited by 630
Jin, Y., Li, S., Kushima, A., Zheng, X., Sun, Y., Xie, J., Sun, J., Xue, W., Zhou, G., Wu, J., et al. (2017) · Energy & Environmental Science · doi:10.1039/c6ee02685k · Cited by 527
Metadata
- Authors
- Mayo, M. J., Siegel, R. W., Narayanasamy, A., & Nix, W. D.
- Venue
- Journal of Materials Research
- Published
- 1990-05
- Volume
- 5
- Issue
- 5
- Pages
- 1073-1082
- ISSN
- 0884-1616 (ISSN-L)
- 0884-2914
- 2044-5326
- OpenAlex
- W1800562981
- Cited by
- 369
- References
- 5
- FWCI
- 35.22
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.