The DOI matches its Crossref record; 12 of the 12 references it cites were found in a registry or an index.
Measurement of Thin Film Mechanical Properties Using Nanoindentation
Abstract
One of the simplest ways to measure the mechanical properties of a thin film is to deform it on a very small scale. Because indentation testing with a sharp indenter is one convenient means to accomplish this, nanoindentation, or indentation testing at the nanometer scale, has become one of the most widely used techniques for measuring the mechanical properties of thin films. Other reasons for the popularity of nanoindentation stem from the ease with which a wide variety of mechanical properties can be measured without removing the film from its substrate and the ability to probe a surface at numerous points and spatially map its mechanical properties. The utility of the mapping capability is illustrated in Figure 1, which shows several small indentations made at selected points in a microelectronic device. The hardness and modulus of the device were determined at each point. In addition to microelectronics, nanoindentation has also proved useful in the study of optical coatings, hard coatings, and materials with surfaces modified by ion implantation and laser treatment.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Oliver, W. C., & Pharr, G. M. (1992) · Journal of Materials Research · doi:10.1557/jmr.1992.1564 · Cited by 26,961
Self-citationSneddon, I. N. (1965) · International Journal of Engineering Science · doi:10.1016/0020-7225(65)90019-4 · Cited by 4,346
A method for interpreting the data from depth-sensing indentation instruments
Doerner, M. F., & Nix, W. D. (1986) · Journal of Materials Research · doi:10.1557/jmr.1986.0601 · Cited by 2,863
Single Crystal Elastic Constants and Calculated Aggregate Properties. A Handbook
Simmons, G., & Wang, H. F. (1971) · Medical Entomology and Zoology · Cited by 2,644
Mechanical properties of thin films
Nix, W. D. (1989) · Metallurgical Transactions A · doi:10.1007/bf02666659 · Cited by 2,546
Hardness measurement at penetration depths as small as 20 nm
Pethicai, J. B., Hutchings, R., & Oliver, W. C. (1983) · Philosophical magazine. A/Philosophical magazine. A. Physics of condensed matter. Structure, defects and mechanical properties · doi:10.1080/01418618308234914 · Cited by 936
Self-citationElastic analysis of some punch problems for a layered medium
King, R. B. (1987) · International Journal of Solids and Structures · doi:10.1016/0020-7683(87)90116-8 · Cited by 898
A micro-indentation study of superplasticity in Pb, Sn, and Sn-38 wt% Pb
Mayo, M. J., & Nix, W. D. (1988) · Acta Metallurgica · doi:10.1016/0001-6160(88)90319-7 · Cited by 439
Vickers Indentation Curves of Magnesium Oxide (MgO)
Loubet, J. L., Georges, J. M., Marchesini, O., & Meille, G. (1984) · Journal of Tribology · doi:10.1115/1.3260865 · Cited by 421
Tip Surface Interactions in STM and AFM
Pethica, J. B., & Oliver, W. C. (1987) · Physica Scripta · doi:10.1088/0031-8949/1987/t19a/010 · Cited by 388
Self-citation
Cited by
Elastic properties of human cortical and trabecular lamellar bone measured by nanoindentation
Rho, J.-Y., Tsui, T. Y., & Pharr, G. M. (1997) · Biomaterials · doi:10.1016/s0142-9612(97)00073-2 · Cited by 924
Self-citationResidual Stress in Metal Additive Manufacturing
Li, C., Liu, Z. Y., Fang, X. Y., & Guo, Y. B. (2018) · Procedia CIRP · doi:10.1016/j.procir.2018.05.039 · Cited by 708
Turner, C. H., Rho, J., Takano, Y., Tsui, T. Y., & Pharr, G. M. (1999) · Journal of Biomechanics · doi:10.1016/s0021-9290(98)00177-8 · Cited by 547
Self-citationStolz, M., Raiteri, R., Daniels, A. U., VanLandingham, M. R., Baschong, W., & Aebi, U. (2004) · Biophysical Journal · doi:10.1016/s0006-3495(04)74375-1 · Cited by 454
Bei, H., Shim, S., Pharr, G. M., & George, E. P. (2008) · Acta Materialia · doi:10.1016/j.actamat.2008.05.030 · Cited by 327
Self-citation
Metadata
- Authors
- Pharr, G. M., & Oliver, W. C.
- Venue
- MRS Bulletin
- Published
- 1992-07
- Volume
- 17
- Issue
- 7
- Pages
- 28-33
- ISSN
- 0883-7694 (ISSN-L)
- 1938-1425
- OpenAlex
- W2124217397
- Cited by
- 1,012
- References
- 12
- FWCI
- 18.49
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: Measurement of Thin Film Mechanical Properties Using Nanoindentation. https://app.cochat.ai/papers/10.1557/s0883769400041634
- The paper
- Pharr, G. M., & Oliver, W. C. (1992). Measurement of Thin Film Mechanical Properties Using Nanoindentation. MRS Bulletin. https://doi.org/10.1557/s0883769400041634
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.