The DOI matches its Crossref record; 5 of the 5 references it cites were found in a registry or an index.
Quantitative analysis of strengthening mechanisms in thin Cu films: Effects of film thickness, grain size, and passivation
Abstract
Thermal stresses in thin Cu films on silicon substrates were examined as a function of film thickness and presence of a silicon nitride passivation layer. At room temperature, tensile stresses increased with decreasing film thickness in qualitative agreement with a dislocation constraint model. However, in order to predict the stress levels, grain-size strengthening, which is shown to follow a Hall–Petch relation, must be superimposed. An alternative explanation is strain-hardening due to the increase in dislocation density, which was measured by x-ray diffraction. At 600 °C, the passivation increases the stress by an order of magnitude; this leads to a substantially different shape of the stress-temperature curves, which now resemble those of aluminum with only a native oxide layer. The effect of passivation is shown to be very sensitive to the deposition and test conditions.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
The tension of metallic films deposited by electrolysis
Stoney, G. G. (1909) · Proceedings of the Royal Society of London. Series A, Containing Papers of a Mathematical and Physical Character · doi:10.1098/rspa.1909.0021 · Cited by 4,872
Deformation-Mechanism Maps: The Plasticity and Creep of Metals and Ceramics
Frost, H. J., & Ashby, M. F. (1982) · CERN Document Server (European Organization for Nuclear Research) · Cited by 2,957
Mechanical properties of thin films
Nix, W. D. (1989) · Metallurgical Transactions A · doi:10.1007/bf02666659 · Cited by 2,546
Mechanical behavior of materials
(1990) · Choice Reviews Online · doi:10.5860/choice.28-0309 · Cited by 1,843
Thin Films Stresses and Mechanical Properties VI
Gerberich, W. W., Gao, H. J., Sundgren, J. ‐., & Baker, S. P. (1996) · Cited by 508
Self-citation
Cited by
Size effects in materials due to microstructural and dimensional constraints: a comparative review
Arzt, E. (1998) · Acta Materialia · doi:10.1016/s1359-6454(98)00231-6 · Cited by 1,180
Self-citationPlasticity in Confined Dimensions
Kraft, O., Gruber, P. A., Mönig, R., & Weygand, D. (2010) · Annual Review of Materials Research · doi:10.1146/annurev-matsci-082908-145409 · Cited by 429
The yield strength of thin copper films on Kapton
Yu, D. Y. W., & Spaepen, F. (2004) · Journal of Applied Physics · doi:10.1063/1.1644634 · Cited by 295
Stress and Refractive Index Control of SiO2 Thin Films for Suspended Waveguides
Wostbrock, N., & Busani, T. (2020) · Nanomaterials · doi:10.3390/nano10112105 · Cited by 12
Metadata
- Authors
- Keller, R.-M., Baker, S. P., & Arzt, E.
- Venue
- Journal of Materials Research
- Published
- 1998-05
- Volume
- 13
- Issue
- 5
- Pages
- 1307-1317
- ISSN
- 0884-1616 (ISSN-L)
- 0884-2914
- 2044-5326
- OpenAlex
- W2141660633
- Cited by
- 259
- References
- 5
- FWCI
- 12.02
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.