The DOI matches its Crossref record; 27 of the 27 references it cites were found in a registry or an index.
Crystallization and high-temperature structural stability of titanium oxide nanotube arrays
Abstract
The stability of titanium oxide nanotube arrays at elevated temperatures was studied in dry oxygen as well as dry and humid argon environments. The tubes crystallized in the anatase phase at a temperature of about 280 °C irrespective of the ambient. Anatase crystallites formed inside the tube walls and transformed completely to rutile at about 620 °C in dry environments and 570 °C in humid argon. No discernible changes in the dimensions of the tubes were found when the heat treatment was performed in oxygen. However, variations of 10% and 20% in average inner diameter and wall thickness, respectively, were observed when annealing in a dry argon atmosphere at 580 °C for 3 h. Pore shrinkage was even more pronounced in humid argon environments. In all cases the nanotube architecture was found to be stable up to approximately 580 °C, above which oxidation and grain growth in the titanium support disrupted the overlying nanotube array.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Triblock Copolymer Syntheses of Mesoporous Silica with Periodic 50 to 300 Angstrom Pores
Zhao, D., Feng, J., Huo, Q., Melosh, N., Fredrickson, G. H., Chmelka, B. F., & Stucky, G. D. (1998) · Science · doi:10.1126/science.279.5350.548 · Cited by 11,753
Kingery, W. D., Bowen, H. K., Uhlmann, D. R., & Frieser, R. (1977) · Journal of The Electrochemical Society · doi:10.1149/1.2133296 · Cited by 7,923
X-ray diffraction procedures for polycrystalline and amorphous materials
Klug, H. P., & Alexander, L. (1954) · Cited by 6,000
X-Ray Diffraction Procedures for Polycrystalline and Amorphous Materials.
Patterson, A. L. (1955) · Journal of the American Chemical Society · doi:10.1021/ja01612a110 · Cited by 2,777
Formation of Titanium Oxide Nanotube
Kasuga, T., Hiramatsu, M., Hoson, A., Sekino, T., & Niihara, K. (1998) · Langmuir · doi:10.1021/la9713816 · Cited by 2,475
Titanium oxide nanotube arrays prepared by anodic oxidation
Gong, D., Grimes, C. A., Varghese, O. K., Hu, W., Singh, R. S., Chen, Z., & Dickey, E. C. (2001) · Journal of Materials Research · doi:10.1557/jmr.2001.0457 · Cited by 2,041
Self-citationTitania Nanotubes Prepared by Chemical Processing
Kasuga, T., Hiramatsu, M., Hoson, A., Sekino, T., & Niihara, K. (1999) · Advanced Materials · doi:10.1002/(sici)1521-4095(199910)11:15<1307::aid-adma1307>3.0.co;2-h · Cited by 1,576
Zhang, H., & Banfield, J. F. (2000) · The Journal of Physical Chemistry B · doi:10.1021/jp000499j · Cited by 1,551
Thermodynamic analysis of phase stability of nanocrystalline titania
Zhang, H., & Banfield, J. F. (1998) · Journal of Materials Chemistry · doi:10.1039/a802619j · Cited by 1,322
Comparison of Dye-Sensitized Rutile- and Anatase-Based TiO2Solar Cells
Park, N.-G., van de Lagemaat, J., & Frank, A. J. (2000) · The Journal of Physical Chemistry B · doi:10.1021/jp994365l · Cited by 1,121
Catalyst deactivation: is it predictable?
Moulijn, J. A., van Diepen, A. E., & Kapteijn, F. (2001) · Applied Catalysis A: General · doi:10.1016/s0926-860x(00)00842-5 · Cited by 813
Formation of a Titanium Dioxide Nanotube Array
Hoyer, P. (1996) · Langmuir · doi:10.1021/la9507803 · Cited by 696
Preparation and structure analysis of titanium oxide nanotubes
Du, G. H., Chen, Q., Che, R. C., Yuan, Z. Y., & Peng, L.-M. (2001) · Applied Physics Letters · doi:10.1063/1.1423403 · Cited by 562
Perspectives in catalytic applications of mesostructured materials
Trong On, D., Desplantier-Giscard, D., Danumah, C., & Kaliaguine, S. (2001) · Applied Catalysis A: General · doi:10.1016/s0926-860x(01)00842-0 · Cited by 444
Zhang, H., & Banfield, J. F. (2000) · Journal of materials research/Pratt's guide to venture capital sources · doi:10.1557/jmr.2000.0067 · Cited by 350
Densification of nanostructured titania assisted by a phase transformation
Kumar, K.-N. P., Keizer, K., Burggraaf, A. J., Okubo, T., Nagamoto, H., & Morooka, S. (1992) · Nature · doi:10.1038/358048a0 · Cited by 348
Direct preparation of anatase TiO2 nanotubes in porous alumina membranes
Imai, H., Takei, Y., Shimizu, K., Matsuda, M., & Hirashima, H. (1999) · Journal of Materials Chemistry · doi:10.1039/a906005g · Cited by 345
Formation of Titania Nanotubes with High Photo-Catalytic Activity
Adachi, M., Murata, Y., Harada, M., & Yoshikawa, S. (2000) · Chemistry Letters · doi:10.1246/cl.2000.942 · Cited by 320
Textural evolution and phase transformation in titania membranes: Part 1.—Unsupported membranes
Kumar, K.-N. P., Keizer, K., & Burggraaf, A. J. (1993) · J. Mater. Chem. · doi:10.1039/jm9930301141 · Cited by 184
Grain Growth and Phase Transformation of Titanium Oxide During Calcination
IIDA, Y., & Ozaki, S. (1961) · Journal of the American Ceramic Society · doi:10.1111/j.1151-2916.1961.tb13725.x · Cited by 180
Kinetics of Crystallization of ZrF 4 ‐Ba 2 ‐LaF 3 Glass by Differential Scanning Calorimetry
Bansal, N. P., Doremus, R. H., Bruce, A. J., & Moynihan, C. T. (1983) · Journal of the American Ceramic Society · doi:10.1111/j.1151-2916.1983.tb15704.x · Cited by 173
Kinetics of the anatase–rutile transformation in TiO2 in the presence of Fe2O3
Gennari, F. C., & Pasquevich, D. M. (1998) · Journal of Materials Science · doi:10.1023/a:1017515804370 · Cited by 170
Pore size evolution during sintering of ceramic oxides
Varela, J. A., WHITTEMORE, O. J. J., & Longo, E. (1990) · Ceramics International · doi:10.1016/0272-8842(90)90053-i · Cited by 143
Microstructure of TiO 2 and ZnO Films Fabricated by the Sol‐Gel Method
Ohya, Y., Saiki, H., Tanaka, T. T. T., & Takahashi, Y. (1996) · Journal of the American Ceramic Society · doi:10.1111/j.1151-2916.1996.tb08512.x · Cited by 135
Preparation of Long TiO2 Nanotubes from Ultrafine Rutile Nanocrystals
Zhang, Q., Gao, L., Sun, J., & Zheng, S. (2002) · Chemistry Letters · doi:10.1246/cl.2002.226 · Cited by 106
A solid state solar cell using sol–gel processed material and a polymer
Fan, Q., McQuillin, B., Bradley, D. D. C., Whitelegg, S. A., & Seddon, A. B. (2001) · Chemical Physics Letters · doi:10.1016/s0009-2614(01)01003-x · Cited by 94
Characterization of mesoporous alumina molecular sieves synthesized by nonionic templating
Deng, W., Bodart, P. R., Pruski, M., & Shanks, B. H. (2002) · Microporous and Mesoporous Materials · doi:10.1016/s1387-1811(02)00315-3 · Cited by 78
Cited by
Titanium Dioxide Nanomaterials: Synthesis, Properties, Modifications, and Applications
Chen, X., & Mao, S. S. (2007) · Chemical Reviews · doi:10.1021/cr0500535 · Cited by 10,688
Zhu, K., Neale, N. R., Miedaner, A., & Frank, A. J. (2007) · Nano Letters · doi:10.1021/nl062000o · Cited by 2,033
Mor, G. K., Varghese, O. K., Paulose, M., Shankar, K., & Grimes, C. A. (2006) · Solar Energy Materials and Solar Cells · doi:10.1016/j.solmat.2006.04.007 · Cited by 1,958
Self-citationMetal oxides for solid-state gas sensors: What determines our choice?
Korotcenkov, G. (2007) · Materials Science and Engineering: B · doi:10.1016/j.mseb.2007.01.044 · Cited by 1,670
Wu, B., Pan, Z., Ding, D., Cuiuri, D., Li, H., Xu, J., & Norrish, J. (2018) · Journal of Manufacturing Processes · doi:10.1016/j.jmapro.2018.08.001 · Cited by 1,577
Metadata
- Authors
- Varghese, O. K., Gong, D., Paulose, M., Grimes, C. A., & Dickey, E. C.
- Venue
- Journal of Materials Research
- Published
- 2003-01
- Volume
- 18
- Issue
- 1
- Pages
- 156-165
- ISSN
- 0884-1616 (ISSN-L)
- 0884-2914
- 2044-5326
- OpenAlex
- W2142547791
- Cited by
- 691
- References
- 27
- FWCI
- 14.83
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.