The DOI matches its Crossref record; 2 of the 2 references it cites were found in a registry or an index.
Nanoscale Morphology and Indentation of Individual Nacre Tablets from the Gastropod Mollusc Trochus Niloticus
Abstract
The inner nacreous layer of gastropod mollusc Trochus niloticus is composed of ∼95 wt% planar arrays of polygonal aragonite-based tablets (∼8 μm wide, ∼0.9 μm thick, stacked ∼40 nm apart) and ∼5 wt% biomacromolecules. High-resolution tapping mode atomic force microscope images enabled nanoscale resolution of fractured tablet cross-sections, the organic component, and deformation of individual nanoasperities on top of tablet surfaces. Nanoindentation was performed on individual nacre tablets and the elastic modulus E and yield stress σ y were reduced from elastic-plastic finite element simulations yielding E = 92 GPa, σ y = 11 GPa (freshly cleaved samples) and E = 79 GPa, σ y = 9 GPa (artificial seawater soaked samples). Images of the indents revealed extensive plastic deformation with a clear residual indent and surrounding pileup.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
A three-dimensional constitutive model for the large stretch behavior of rubber elastic materials
Arruda, E. M., & Boyce, M. C. (1993) · Journal of the Mechanics and Physics of Solids · doi:10.1016/0022-5096(93)90013-6 · Cited by 3,239
Self-citationMacromolecules in mollusc shells and their functions in biomineralization
Weiner, S., & Traub, W. (1984) · Philosophical Transactions of the Royal Society of London. B, Biological Sciences · doi:10.1098/rstb.1984.0036 · Cited by 426 · cited 1×
“AFM imaging of the organic matrix yields low heights of ∼1 nm, which corresponds approximately to the thickness of an individual polymer chain and an irregular conformation, most likely due to collapse and denaturation during dehydration and/or partial removal during cleavage leaving only the most strongly bound macro…”
Background
Cited by
Review on nanoparticles and nanostructured materials: history, sources, toxicity and regulations
Jeevanandam, J., Barhoum, A., Chan, Y. S., Dufresne, A., & Danquah, M. K. (2018) · Beilstein Journal of Nanotechnology · doi:10.3762/bjnano.9.98 · Cited by 3,297
Biological materials: Structure and mechanical properties
Meyers, M. A., Chen, P.-Y., Lin, A. Y.-M., & Seki, Y. (2008) · Progress in Materials Science · doi:10.1016/j.pmatsci.2007.05.002 · Cited by 2,573
On the mechanics of mother-of-pearl: A key feature in the material hierarchical structure
BARTHELAT, F., TANG, H., ZAVATTIERI, P., LI, C., & ESPINOSA, H. (2007) · Journal of the Mechanics and Physics of Solids · doi:10.1016/j.jmps.2006.07.007 · Cited by 1,032
Merger of structure and material in nacre and bone – Perspectives on de novo biomimetic materials
Espinosa, H. D., Rim, J. E., Barthelat, F., & Buehler, M. J. (2009) · Progress in Materials Science · doi:10.1016/j.pmatsci.2009.05.001 · Cited by 817
Biological materials: Functional adaptations and bioinspired designs
Chen, P.-Y., McKittrick, J., & Meyers, M. A. (2012) · Progress in Materials Science · doi:10.1016/j.pmatsci.2012.03.001 · Cited by 766
“70c) is composed of polysaccharide b -chitin with fibrils of 8 nm in diameter [316,339] (see Figs.”
BackgroundInfluentialHierarchical structure and mechanical properties of nacre: a review
Sun, J., & Bhushan, B. (2012) · RSC Advances · doi:10.1039/c2ra20218b · Cited by 601
Layered nanocomposites inspired by the structure and mechanical properties of nacre
Wang, J., Cheng, Q., & Tang, Z. (2012) · Chem. Soc. Rev. · doi:10.1039/c1cs15106a · Cited by 539
An Experimental Investigation of Deformation and Fracture of Nacre–Mother of Pearl
Barthelat, F., & Espinosa, H. D. (2007) · Experimental Mechanics · doi:10.1007/s11340-007-9040-1 · Cited by 504
Nanoindentation of biological materials
Ebenstein, D. M., & Pruitt, L. A. (2006) · Nano Today · doi:10.1016/s1748-0132(06)70077-9 · Cited by 479
Materials design principles of ancient fish armour
Bruet, B. J. F., Song, J., Boyce, M. C., & Ortiz, C. (2008) · Nature Materials · doi:10.1038/nmat2231 · Cited by 447
Self-citationBioinspired Structural Materials
Ortiz, C., & Boyce, M. C. (2008) · Science · doi:10.1126/science.1154295 · Cited by 430
Self-citationMechanical strength of abalone nacre: Role of the soft organic layer
Meyers, M. A., Lin, A. Y.-M., Chen, P.-Y., & Muyco, J. (2008) · Journal of the Mechanical Behavior of Biomedical Materials · doi:10.1016/j.jmbbm.2007.03.001 · Cited by 427
Tablet-level origin of toughening in abalone shells and translation to synthetic composite materials
Espinosa, H. D., Juster, A. L., Latourte, F. J., Loh, O. Y., Gregoire, D., & Zavattieri, P. D. (2011) · Nature Communications · doi:10.1038/ncomms1172 · Cited by 411
Mechanical properties of nacre constituents and their impact on mechanical performance
Barthelat, F., Li, C.-M., Comi, C., & Espinosa, H. D. (2006) · Journal of Materials Research · doi:10.1557/jmr.2006.0239 · Cited by 384
Nikolov, S., Petrov, M., Lymperakis, L., Friák, M., Sachs, C., Fabritius, H., Raabe, D., & Neugebauer, J. (2010) · Advanced Materials · doi:10.1002/adma.200902019 · Cited by 349
Discontinuous crack-bridging model for fracture toughness analysis of nacre
Shao, Y., Zhao, H.-P., Feng, X.-Q., & Gao, H. (2012) · Journal of the Mechanics and Physics of Solids · doi:10.1016/j.jmps.2012.04.011 · Cited by 335
Biomimetics for next generation materials
Barthelat, F. (2007) · Philosophical Transactions of the Royal Society A: Mathematical, Physical and Engineering Sciences · doi:10.1098/rsta.2007.0006 · Cited by 282
Origin of flaw-tolerance in nacre
Huang, Z., & Li, X. (2013) · Scientific Reports · doi:10.1038/srep01693 · Cited by 111
Metadata
- Authors
- Bruet, B. J. F., Qi, H. J., Boyce, M. C., Panas, R., Tai, K., Frick, L., & Ortiz, C.
- Venue
- Journal of Materials Research
- Published
- 2005-09
- Volume
- 20
- Issue
- 9
- Pages
- 2400-2419
- ISSN
- 0884-1616 (ISSN-L)
- 0884-2914
- 2044-5326
- OpenAlex
- W2145189635
- Cited by
- 202
- References
- 2
- FWCI
- 6.04
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.