The DOI matches its Crossref record; 3 of the 3 references it cites were found in a registry or an index.
Hydration of alkali-activated slag: thermodynamic modelling
Abstract
The composition of solid and liquid phases of alkali-activated slag systems was investigated by thermodynamic modelling. The calculations predict the formation of C(–A)–S–H, stratlingite and hydrotalcite in different alkali-activated slag systems, which agrees well with experimental findings. In addition traces of FeS and ettringite are predicted to precipitate. The type of alkaline activator (Na-silicate, NaOH) has no influence on the type of hydrates formed but influences the Ca/Si ratio of the C–S–H. The addition of sodium silicate leads to the formation of C–S–H with a higher Ca/Si ratio (1.1–1.2), whereas NaOH results in a Ca/Si ratio of 0.8to1.1. In contrast, the kind and concentration of the activator has strong influence on the composition of the pore solution. Low concentrations of the alkaline activator result in lower Na, Si and Al concentrations and lower pH values. In all pore solutions a high concentration of sulphide (HS–) is expected to be present.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Hydration products of alkali activated slag cement
Wang, S.-D., & Scrivener, K. L. (1995) · Cement and Concrete Research · doi:10.1016/0008-8846(95)00045-e · Cited by 997
Nagra/PSI Chemical Thermodynamic Data Base 01/01
Hummel, W., Berner, U., Curti, E., Pearson, F. J., & Thoenen, T. (2002) · Radiochimica Acta · doi:10.1524/ract.2002.90.9-11_2002.805 · Cited by 705
Puertas, F., Fernández-Jiménez, A., & Blanco-Varela, M. T. (2004) · Cement and Concrete Research · doi:10.1016/s0008-8846(03)00254-0 · Cited by 409
Cited by
Advances in alternative cementitious binders
Juenger, M. C. G., Winnefeld, F., Provis, J. L., & Ideker, J. H. (2011) · Cement and Concrete Research · doi:10.1016/j.cemconres.2010.11.012 · Cited by 1,851
Geopolymers and Related Alkali-Activated Materials
Provis, J. L., & Bernal, S. A. (2014) · Annual Review of Materials Research · doi:10.1146/annurev-matsci-070813-113515 · Cited by 1,597
Advances in understanding alkali-activated materials
Provis, J. L., Palomo, A., & Shi, C. (2015) · Cement and Concrete Research · doi:10.1016/j.cemconres.2015.04.013 · Cited by 1,537
Lothenbach, B., Kulik, D. A., Matschei, T., Balonis, M., Baquerizo, L., Dilnesa, B., Miron, G. D., & Myers, R. J. (2019) · Cement and Concrete Research · doi:10.1016/j.cemconres.2018.04.018 · Cited by 1,250
Self-citationBen Haha, M., Le Saout, G., Winnefeld, F., & Lothenbach, B. (2011) · Cement and Concrete Research · doi:10.1016/j.cemconres.2010.11.016 · Cited by 1,059
Self-citationGeopolymers and other alkali activated materials: why, how, and what?
Provis, J. L. (2014) · Materials and Structures · doi:10.1617/s11527-013-0211-5 · Cited by 986
Haha, M. B., Lothenbach, B., Le Saout, G., & Winnefeld, F. (2011) · Cement and Concrete Research · doi:10.1016/j.cemconres.2011.05.002 · Cited by 914
Self-citationHydration of calcium sulfoaluminate cements — Experimental findings and thermodynamic modelling
Winnefeld, F., & Lothenbach, B. (2010) · Cement and Concrete Research · doi:10.1016/j.cemconres.2009.08.014 · Cited by 909
Self-citationHaha, M. B., Lothenbach, B., Le Saout, G., & Winnefeld, F. (2012) · Cement and Concrete Research · doi:10.1016/j.cemconres.2011.08.005 · Cited by 580
Self-citationSupplementary Cementitious Materials
Snellings, R., Mertens, G., & Elsen, J. (2012) · Reviews in Mineralogy and Geochemistry · doi:10.2138/rmg.2012.74.6 · Cited by 574
Walkley, B., San Nicolas, R., Sani, M.-A., Rees, G. J., Hanna, J. V., van Deventer, J. S. J., & Provis, J. L. (2016) · Cement and Concrete Research · doi:10.1016/j.cemconres.2016.08.010 · Cited by 544
A review: Reaction mechanism and strength of slag and fly ash-based alkali-activated materials
Sun, B., Ye, G., & de Schutter, G. (2022) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2022.126843 · Cited by 386
Hydration mechanisms of super sulphated slag cement
Gruskovnjak, A., Lothenbach, B., Winnefeld, F., Figi, R., Ko, S.-C., Adler, M., & Mäder, U. (2008) · Cement and Concrete Research · doi:10.1016/j.cemconres.2008.03.004 · Cited by 378
Self-citationSolid-state nuclear magnetic resonance spectroscopy of cements
Walkley, B., & Provis, J. L. (2019) · Materials Today Advances · doi:10.1016/j.mtadv.2019.100007 · Cited by 361
Pore solution composition and alkali diffusion in inorganic polymer cement
Lloyd, R. R., Provis, J. L., & van Deventer, J. S. J. (2010) · Cement and Concrete Research · doi:10.1016/j.cemconres.2010.04.008 · Cited by 355
Strength and drying shrinkage of reactive MgO modified alkali-activated slag paste
Jin, F., Gu, K., & Al-Tabbaa, A. (2014) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2013.10.081 · Cited by 327
A thermodynamic model for C-(N-)A-S-H gel: CNASH_ss. Derivation and validation
Myers, R. J., Bernal, S. A., & Provis, J. L. (2014) · Cement and Concrete Research · doi:10.1016/j.cemconres.2014.07.005 · Cited by 312
Pore solution composition of alkali-activated slag/fly ash pastes
Zuo, Y., Nedeljković, M., & Ye, G. (2019) · Cement and Concrete Research · doi:10.1016/j.cemconres.2018.10.010 · Cited by 274
Hydration Characteristics and Microstructure of Alkali-Activated Slag Concrete: A Review
Fu, Q., Bu, M., Zhang, Z., Xu, W., Yuan, Q., & Niu, D. (2023) · Engineering · doi:10.1016/j.eng.2021.07.026 · Cited by 272
Thermodynamic equilibrium calculations in cementitious systems
Lothenbach, B. (2010) · Materials and Structures · doi:10.1617/s11527-010-9592-x · Cited by 258
Self-citationRafeet, A., Vinai, R., Soutsos, M., & Sha, W. (2019) · Cement and Concrete Research · doi:10.1016/j.cemconres.2019.05.003 · Cited by 254
Phase diagrams for alkali-activated slag binders
Myers, R. J., Bernal, S. A., & Provis, J. L. (2017) · Cement and Concrete Research · doi:10.1016/j.cemconres.2017.02.006 · Cited by 241
Thermodynamic modelling of alkali-activated slag cements
Myers, R. J., Lothenbach, B., Bernal, S. A., & Provis, J. L. (2015) · Applied Geochemistry · doi:10.1016/j.apgeochem.2015.06.006 · Cited by 240
“4 has been applied to AAS cements in the past (Lothenbach and Gruskovnjak, 2007), however the 78”
MethodSelf-citationGong, K., & White, C. E. (2016) · Cement and Concrete Research · doi:10.1016/j.cemconres.2016.09.003 · Cited by 125
A parametric study of accelerated carbonation in alkali-activated slag
McCaslin, E. R., & White, C. E. (2021) · Cement and Concrete Research · doi:10.1016/j.cemconres.2021.106454 · Cited by 65
Metadata
- Authors
- Lothenbach, B., & Gruskovnjak, A.
- Venue
- Advances in Cement Research
- Publisher
- Emerald
- Published
- 2007-04
- Volume
- 19
- Issue
- 2
- Pages
- 81-92
- ISSN
- 0951-7197 (ISSN-L)
- 1751-7605
- OpenAlex
- W1970474559
- Cited by
- 166
- References
- 3
- FWCI
- 13.86
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.