Alkali-activated slag cements produced with a blended sodium carbonate/sodium silicate activator
The DOI matches its Crossref record; 9 of the 9 references it cites were found in a registry or an index.
Abstract
An alkali-activated slag cement produced with a blend of sodium carbonate/sodium silicate activator was characterised. This binder hardened within 12 h and achieved a compressive strength of 20 MPa after 24 h of curing under ambient conditions, which is associated with the formation of an aluminium substituted calcium silicate hydrate as the main reaction product. Carbonates including pirssonite, vaterite, aragonite and calcite were identified along with the zeolites hydroxysodalite and analcime at early times of reaction. The partial substitution of sodium carbonate by sodium silicate reduces the concentration of carbonate ions in the pore solution, increasing the alkalinity of the system compared with a solely carbonate-activated paste, accelerating the kinetics of reaction and supplying additional silicate species to react with the calcium dissolving from the slag as the reaction proceeds. These results demonstrate that this blend of activators can be used effectively for the production of high-strength alkali-activated slag cements, with a microstructure comparable to what has been identified in aged sodium-carbonate-activated slag cements but without the extended setting time reaction usually identified when using this salt as an alkali activator.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Ben Haha, M., Le Saout, G., Winnefeld, F., & Lothenbach, B. (2011) · Cement and Concrete Research · doi:10.1016/j.cemconres.2010.11.016 · Cited by 1,059 · cited 3×
“…has been identified in sodium silicate activation of the same slag (Bernal et al., 2014) and in other systems with comparable slag chemistry (Ben Haha et al., 2011), where the pre-induction period was observed during the first hour after mixing, followed by short induction periods ( 10 h in…”
BackgroundMethodBernal, S. A., Provis, J. L., Walkley, B., San Nicolas, R., Gehman, J. D., Brice, D. G., Kilcullen, A. R., Duxson, P., & van Deventer, J. S. J. (2013) · Cement and Concrete Research · doi:10.1016/j.cemconres.2013.06.007 · Cited by 1,019 · cited 9×
“, 1993), and layered double hydroxides with a hydrotalcite-type structure, along with zeolites as secondary reaction products, depending on the composition of the slag used (Bernal et al., 2013; Provis and Bernal, 2014).”
BackgroundMethodResultSelf-citationMyers, R. J., Bernal, S. A., San Nicolas, R., & Provis, J. L. (2013) · Langmuir · doi:10.1021/la4000473 · Cited by 579 · cited 3×
“…ppm was observed along with the formation of a lowintensity shoulder at ~58 ppm, consistent with the formation of aluminium-substituted tobermorites with low calcium/(silicon +aluminium) ratio (Sun et al., 2006) and highly cross-linked calcium aluminium silicate hydrate phases (Myers et al., 2013).”
BackgroundSelf-citationBernal, S. A., San Nicolas, R., Myers, R. J., Mejía de Gutiérrez, R., Puertas, F., van Deventer, J. S. J., & Provis, J. L. (2014) · Cement and Concrete Research · doi:10.1016/j.cemconres.2013.12.003 · Cited by 493
Self-citationAndersen, M. D., Jakobsen, H. J., & Skibsted, J. (2003) · Inorganic Chemistry · doi:10.1021/ic020607b · Cited by 434 · cited 1×
“…van Deventer and Provis Offprint provided courtesy of www.icevirtuallibrary.com Author copy for personal use, not for distribution This band corresponds to the aluminium (IV) incorporated in bridging tetrahedra in the calcium aluminium silicate hydrate (Andersen et al., 2003; Sun et al., 2006).”
BackgroundBernal, S. A., Provis, J. L., Brice, D. G., Kilcullen, A., Duxson, P., & van Deventer, J. S. J. (2012) · Cement and Concrete Research · doi:10.1016/j.cemconres.2012.07.002 · Cited by 385
Self-citationRole of carbonates in the chemical evolution of sodium carbonate-activated slag binders
Bernal, S. A., Provis, J. L., Myers, R. J., San Nicolas, R., & van Deventer, J. S. J. (2015) · Materials and Structures · doi:10.1617/s11527-014-0412-6 · Cited by 334 · cited 14×
“…Deventer and Provis Offprint provided courtesy of www.icevirtuallibrary.com Author copy for personal use, not for distribution used in this study (Bernal et al., 2015), where the material had not yet hardened after 1 d of curing, and after 4 d and 7 d of curing the mortars achieved compressive…”
BackgroundMethodResultSelf-citationThe Role of Al in Cross‐Linking of Alkali‐Activated Slag Cements
Myers, R. J., Bernal, S. A., Gehman, J. D., van Deventer, J. S. J., & Provis, J. L. (2015) · Journal of the American Ceramic Society · doi:10.1111/jace.13360 · Cited by 287
Self-citationMagnesium calcite crystallizatin from water–alcohol mixtures
Falini, G., Gazzano, M., & Ripamonti, A. (1996) · Chem. Commun. · doi:10.1039/cc9960001037 · Cited by 87
Cited by
Recent progress in low-carbon binders
Shi, C., Qu, B., & Provis, J. L. (2019) · Cement and Concrete Research · doi:10.1016/j.cemconres.2019.05.009 · Cited by 714
Self-citationKe, X., Bernal, S. A., & Provis, J. L. (2016) · Cement and Concrete Research · doi:10.1016/j.cemconres.2015.11.012 · Cited by 328
Self-citationKe, X., Bernal, S. A., Provis, J. L., & Lothenbach, B. (2020) · Cement and Concrete Research · doi:10.1016/j.cemconres.2020.106158 · Cited by 117
Self-citationLao, J.-C., Xu, L.-Y., Huang, B.-T., Zhu, J.-X., Khan, M., & Dai, J.-G. (2023) · Frontiers in Materials · doi:10.3389/fmats.2023.1142237 · Cited by 86
“A possible reason could be that at the very early stage, the Ca released from the precursors immediately combined with CO3 2- to form CaCO3 polymorphs or sodium-calcium carbonate phase (pirssonite, hydroxysodalite, and gaylussite) (Bernal et al., 2016).”
BackgroundInfluentialSlag-Based Cements That Resist Damage Induced by Carbon Dioxide
Ke, X., Criado, M., Provis, J. L., & Bernal, S. A. (2018) · ACS Sustainable Chemistry & Engineering · doi:10.1021/acssuschemeng.7b04730 · Cited by 62
Self-citation
Metadata
- Authors
- Bernal, S. A., Nicolas, R. S., van Deventer, J. S. J., & Provis, J. L.
- Venue
- Advances in Cement Research
- Publisher
- Emerald
- Published
- 2016-04
- Volume
- 28
- Issue
- 4
- Pages
- 262-273
- ISSN
- 0951-7197 (ISSN-L)
- 1751-7605
- OpenAlex
- W2264142683
- Cited by
- 144
- References
- 9
- FWCI
- 10.46
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: Alkali-activated slag cements produced with a blended sodium carbonate/sodium silicate activator. https://app.cochat.ai/papers/10.1680/jadcr.15.00013
- The paper
- Bernal, S. A., Nicolas, R. S., van Deventer, J. S. J., & Provis, J. L. (2016). Alkali-activated slag cements produced with a blended sodium carbonate/sodium silicate activator. Advances in Cement Research. https://doi.org/10.1680/jadcr.15.00013
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.