The DOI matches its Crossref record.
Development of ultra-high-performance geopolymer concrete
Abstract
This paper presents the development of ambient temperature cured ultra-high-performance geopolymer concrete (UHPGPC). Ultra-high-performance concrete (UHPC) mixtures were developed by completely eliminating Portland cement and activating industrial by-product materials such as ground granulated blastfurnace slag and silica fume. Local standard sand (maximum size 2 mm), quartz sand (600 μm) and 0·16 mm diameter steel fibres of 13 and 6 mm length were used. Fresh properties (density and flowability) and mechanical properties (compressive strength) of the UHPGPC produced under ambient temperature curing conditions were evaluated. Four mixtures with fibres and one mix without fibre addition were studied as the UHPGPC mixtures. The highest average compressive strengths obtained were 175 MPa for UHPGPC with steel fibres (1% 6 mm and 2% 13 mm) and 124 MPa for UHPGPC without fibres. Prismatic specimens (100 × 100 × 500 mm) were cast to determine the flexural strength, which was found to be 10·3–13·5 MPa and 9·1 MPa for mixes with and without steel fibres respectively. The compressive and flexural strengths obtained in this work are comparable to UHPC strengths presented in the literature. Production of this innovative material with industrial by-products and without the conventional curing regimes used for UHPC will improve sustainability and lead to cast-in-situ applications of UHPC.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cited by
Geopolymers as an alternative to Portland cement: An overview
Singh, N. B., & Middendorf, B. (2020) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2019.117455 · Cited by 817
Liu, Y., Shi, C., Zhang, Z., Li, N., & Shi, D. (2020) · Cement and Concrete Composites · doi:10.1016/j.cemconcomp.2020.103665 · Cited by 351
Wetzel, A., & Middendorf, B. (2019) · Cement and Concrete Composites · doi:10.1016/j.cemconcomp.2019.03.023 · Cited by 286
Liu, Y., Zhang, Z., Shi, C., Zhu, D., Li, N., & Deng, Y. (2020) · Cement and Concrete Composites · doi:10.1016/j.cemconcomp.2020.103670 · Cited by 286
Lao, J.-C., Huang, B.-T., Fang, Y., Xu, L.-Y., Dai, J.-G., & Shah, S. P. (2023) · Cement and Concrete Research · doi:10.1016/j.cemconres.2022.107075 · Cited by 281
Metadata
- Authors
- Ambily, P. S., Ravisankar, K., Umarani, C., Dattatreya, J. K., & Iyer, N. R.
- Venue
- Magazine of Concrete Research
- Publisher
- Emerald
- Published
- 2014-01
- Volume
- 66
- Issue
- 2
- Pages
- 82-89
- ISSN
- 0024-9831 (ISSN-L)
- 1751-763X
- OpenAlex
- W2006804845
- Cited by
- 193
- References
- 0
- FWCI
- 3.63
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: Development of ultra-high-performance geopolymer concrete. https://app.cochat.ai/papers/10.1680/macr.13.00057
- The paper
- Ambily, P. S., Ravisankar, K., Umarani, C., Dattatreya, J. K., & Iyer, N. R. (2014). Development of ultra-high-performance geopolymer concrete. Magazine of Concrete Research. https://doi.org/10.1680/macr.13.00057
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.