The DOI matches its Crossref record; 2 of the 2 references it cites were found in a registry or an index.
Comparison of a Lattice‐Boltzmann Model, a Full‐Morphology Model, and a Pore Network Model for Determining Capillary Pressure–Saturation Relationships
Abstract
Effective hydraulic properties of porous media such as the capillary pressure–saturation relation and the hydraulic conductivity function are a direct manifestation of the underlying pore geometry. The porous structure of a macroscopically homogeneous porous medium (sintered glass) was measured in detail using X‐ray microtomography. We investigated the possibility of deriving the water characteristic on the basis of structure analysis. We compared three approaches differing in the amount of required input data, the effort of data processing, and their predictive potential. With increasing complexity, these were (i) a simple pore network model based on a few structural parameters and a simplified process model, (ii) a direct simulation of the pressure–saturation relation based on the full morphology of the porous structure together with a simplified process model, and (iii) Lattice‐Boltzmann (LB) simulations based on the full morphology of the porous structure and modeling the complete multiphase fluid dynamics. We found that the network model, the most simple approach, may be sufficient for estimating the main drainage curve, thus suggesting that the complex pore structure can be reduced to a small set of geometric properties. If dynamic effects are considered, the LB approach provides a reliable representation, but at the cost of substantial computational efforts. Since very thin water films exist in the dry range, the continuity of the water phase cannot be described correctly with the LB approach, which presently uses uniform grids.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
A new model for predicting the hydraulic conductivity of unsaturated porous media
Mualem, Y. (1976) · Water Resources Research · doi:10.1029/wr012i003p00513 · Cited by 8,300
Morphological Image Analysis: Principles and Applications
(2000) · Sensor Review · doi:10.1108/sr.2000.08720cae.001 · Cited by 3,537
Cited by
Wildenschild, D., & Sheppard, A. P. (2013) · Advances in Water Resources · doi:10.1016/j.advwatres.2012.07.018 · Cited by 1,239
Iassonov, P., Gebrenegus, T., & Tuller, M. (2009) · Water Resources Research · doi:10.1029/2009wr008087 · Cited by 628
A Critical Review of Modeling Transport Phenomena in Polymer-Electrolyte Fuel Cells
Weber, A. Z., Borup, R. L., Darling, R. M., Das, P. K., Dursch, T. J., Gu, W., Harvey, D., Kusoglu, A., Litster, S., Mench, M. M., et al. (2014) · Journal of The Electrochemical Society · doi:10.1149/2.0751412jes · Cited by 598
Quantification of soil structure based on Minkowski functions
Vogel, H.-J., Weller, U., & Schlüter, S. (2010) · Computers & Geosciences · doi:10.1016/j.cageo.2010.03.007 · Cited by 365
Self-citationModeling of Two-Phase Behavior in the Gas Diffusion Medium of PEFCs via Full Morphology Approach
Schulz, V. P., Becker, J., Wiegmann, A., Mukherjee, P. P., & Wang, C.-Y. (2007) · Journal of The Electrochemical Society · doi:10.1149/1.2472547 · Cited by 313
Self-citation
Metadata
- Authors
- Vogel, H. ‐., Tölke, J., Schulz, V. P., Krafczyk, M., & Roth, K.
- Venue
- Vadose Zone Journal
- Publisher
- Wiley
- Published
- 2005-05
- Volume
- 4
- Issue
- 2
- Pages
- 380-388
- ISSN
- 1539-1663 (ISSN-L)
- OpenAlex
- W2089362487
- Cited by
- 181
- References
- 2
- FWCI
- 23.24
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.