Comparison of Rietveld-compatible structureless fitting analysis methods for accurate quantification of carbon dioxide fixation in ultramafic mine tailings
Open accessThe DOI matches its Crossref record; 24 of the 24 references it cites were found in a registry or an index.
Abstract
The carbonation of ultramafic rocks, including tailings from ultramafic-hosted ore deposits, can be used to remove CO 2 from the atmosphere and store it safely within minerals over geologic timescales. Quantitative X-ray diffraction (XRD) using Rietveld refinements can be employed to estimate the amount of carbon sequestered by carbonate minerals that form as a result of weathering of ultramafic rocks. However, the presence of structurally disordered phases such as serpentine minerals, which are common in ultramafic ore bodies such as at the Woodsreef chrysotile mine (New South Wales, Australia), results in samples that cannot be analyzed using typical Rietveld refinement strategies. Previous investigations of carbon sequestration at Woodsreef and other ultramafic mine sites typically used modified Rietveld refinement methods that apply structureless pattern fitting for disordered phases; however, no detailed comparison of the accuracy (or precision) of these methods for carbon accounting has yet been attempted, making it difficult to determine the most appropriate analysis method. Such an analysis would need to test whether some methods more accurately quantify the abundances of certain minerals, such as pyroaurite [Mg 6 Fe23+$\begin{array}{} \rm Fe^{3+}_{2} \end{array}$ (CO 3 )(OH) 16 ·4H 2 O] and other hydrotalcite group minerals, which suffer from severe preferred orientation and may play an important role in carbon sequestration at some mines. Here, we assess and compare the accuracy, and to a lesser extent the precision, of three different non-traditional Rietveld refinement methods for carbon accounting: (1) the PONKCS method, (2) the combined use of a Pawley fit for serpentine minerals and an internal standard (Pawley/internal standard method), and (3) the combined use of PONKCS and Pawley/internal standard methods. We examine which of these approaches represents the most accurate way to quantify the abundances of serpentine, pyroaurite, and other carbonate-bearing phases in a given sample. We demonstrate that by combining the PONKCS and Pawley/internal standard methods it is possible to quantify the abundances of disordered phases in a sample and to obtain an estimate of the amorphous content and any unaccounted intensity in an XRD pattern. Eight artificial tailings samples with known mineralogical compositions were prepared to reflect the natural variation found within the tailings at the Woodsreef chrysotile mine. Rietveld refinement results for the three methods were compared with the known compositions of each sample to calculate absolute and relative error values and to evaluate the accuracy of the three methods, including whether they produce systematic under- or overestimates of mineral abundance. Estimated standard deviations were also calculated during refinements; these values, which are a measure of precision, were not strongly affected by the choice of refinement method. The abundance of serpentine minerals is, however, systematically overestimated when using the PONKCS and Pawley/internal standard methods, and the abundances of minor phases (<10 wt%) are systematically underestimated using all three methods. Refined abundances for pyroaurite were found to be increasingly susceptible to error with increasing abundance, with an underestimation of 6.6 wt% absolute (60.6% relative) for a sample containing 10.9 wt% pyroaurite. These significant errors are due to difficulties in mitigating preferred orientation of hydrotalcite minerals during sample preparation as well as modeling its effects on XRD patterns. The abundances of hydromagnesite [Mg 5 (CO 3 ) 4 (OH) 2 ·4H 2 O], another important host for atmospheric CO 2 during weathering of ultramafic rocks, was consistently underestimated by all three methods, with the highest underestimation being 3.7 wt% absolute (or 25.0% relative) for a sample containing 15.0 wt% hydromagnesite. Overall, the Pawley/internal standard method produced more accurate results than the PONKCS method, with an average bias per refinement of 6.7 wt%, compared with 10.3 wt% using PONKCS and 12.9 wt% for the combined PONKCS-Pawley/internal standard method. Furthermore, the values for the refined abundance of hydromagnesite obtained from refinements using the Pawley/internal standard method were significantly more accurate than those for refinements done with the PONKCS method, with relative errors typically <25% for hydromagnesite abundances between 5 and 15 wt%. The simpler and faster sample preparation makes the PONKCS method well-suited for rapid carbon accounting, for instance in the field using a portable XRD; however, the superior accuracy gained when using an internal standard make the Pawley/internal standard method the preferable means of undertaking a detailed laboratory-based study. As all three methods displayed an underestimation of carbonate phases, applying these methods to natural samples will likely produce an underestimate of hydromagnesite and hydro
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Lackner, K. S. (2003) · Science · doi:10.1126/science.1079033 · Cited by 1,290 · cited 2×
“Carbon mineralization is a carbon sequestration strategy that traps CO 2 within the crystal structures of minerals (Seifritz 1990; Lackner et al. 1995; Lackner 2003).”
Carbon dioxide disposal in carbonate minerals
Lackner, K. S., Wendt, C. H., Butt, D. P., Joyce, E. L., & Sharp, D. H. (1995) · Energy · doi:10.1016/0360-5442(95)00071-n · Cited by 1,021
CO2 disposal by means of silicates
SEIFRITZ, W. (1990) · Nature · doi:10.1038/345486b0 · Cited by 956 · cited 1×
“Carbon mineralization is a carbon sequestration strategy that traps CO 2 within the crystal structures of minerals (Seifritz 1990; Lackner et al. 1995; Lackner 2003).”
Oelkers, E. H., Gislason, S. R., & Matter, J. (2008) · Elements · doi:10.2113/gselements.4.5.333 · Cited by 676 · cited 1×
“…and hydroxide minerals weather quickly when exposed to meteoric precipitation and atmospheric CO 2 , releasing Mg 2+ and Ca 2+ into solution, where they react with aqueous carbonate anions to form hydrated carbonate minerals (Berner 1990; Lackner 2002; Oelkers et al. 2008; Power et al. 2013a).”
Carbonate Chemistry for Sequestering Fossil Carbon
Lackner, K. S. (2002) · Annual Review of Energy and the Environment · doi:10.1146/annurev.energy.27.122001.083433 · Cited by 361 · cited 2×
“Mg- and Ca-rich silicate and hydroxide minerals weather quickly when exposed to meteoric precipitation and atmospheric CO2, releasing Mg2+ and Ca2+ into solution, where they react with aqueous carbonate anions to form hydrated carbonate minerals (Berner, 1990; Lackner, 2002; Oelkers et al., 2008; Power et al., 2013a).”
Accelerated carbonation of brucite in mine tailings for carbon sequestration
Harrison, A. L., Power, I. M., & Dipple, G. M. (2013) · Environmental Science & Technology · doi:10.1021/es3012854 · Cited by 328
Wilson, S., Dipple, G. M., Power, I. M., Thom, J. M., Anderson, R. G., Raudsepp, M., Gabites, J. E., & Southam, G. (2009) · Economic Geology · doi:10.2113/gsecongeo.104.1.95 · Cited by 261
Self-citationPerformance evaluation for carbonation of steel-making slags in a slurry reactor
Chang, E.-E., Chen, C.-H., Chen, Y.-H., Pan, S.-Y., & Chiang, P.-C. (2011) · Journal of Hazardous Materials · doi:10.1016/j.jhazmat.2010.11.038 · Cited by 240
Serpentinite Carbonation for CO2 Sequestration
Power, I. M., Wilson, S., & Dipple, G. M. (2013) · Elements · doi:10.2113/gselements.9.2.115 · Cited by 201 · cited 2×
“…of power plants as well as capturing it directly from the atmosphere through passive or accelerated carbonation of mine tailings and alkaline wastes (as reviewed by Bobicki et al. 2012; Chang et al. 2011; Cleugh et al. 2011; Lackner 2002; Leung et al. 2014; Oelkers 2008; Power et al. 2013a, 2013b).”
Self-citationWilson, S., Harrison, A. L., Dipple, G. M., Power, I. M., Barker, S. L. L., Ulrich Mayer, K., Fallon, S. J., Raudsepp, M., & Southam, G. (2014) · International Journal of Greenhouse Gas Control · doi:10.1016/j.ijggc.2014.04.002 · Cited by 181 · cited 10×
“Brucite is reported as the primary Mg source for passive carbonation of mine tailings at many sites (e.g., Oskierski et al. 2013; Wilson et al. 2014), where it can be replaced by hydromagnesite, dypingite, nesquehonite (MgCO 3 ·3H 2 O) or pyroaurite (Wilson et al. 2010, 2014; Oskierski et al. 2013;…”
InfluentialSelf-citation
Cited by
Hamilton, J. L., Wilson, S., Morgan, B., Harrison, A. L., Turvey, C. C., Paterson, D. J., Dipple, G. M., & Southam, G. (2020) · Economic Geology · doi:10.5382/econgeo.4710 · Cited by 111
Self-citationPower, I. M., Dipple, G. M., Bradshaw, P. M. D., & Harrison, A. L. (2020) · International Journal of Greenhouse Gas Control · doi:10.1016/j.ijggc.2019.102895 · Cited by 84
Carbon Mineralization with North American PGM Mine Tailings—Characterization and Reactivity Analysis
Woodall, C. M., Lu, X., Dipple, G., & Wilcox, J. (2021) · Minerals · doi:10.3390/min11080844 · Cited by 23
“detection of low-abundance carbonate-bearing minerals through XRD has been reported to suffer large relative error values [38].”
BackgroundLu, X., Dipple, G. M., & Turvey, C. C. (2025) · International Journal of Greenhouse Gas Control · doi:10.1016/j.ijggc.2025.104315 · Cited by 6
Self-citation
Metadata
- Authors
- Turvey, C. C., Hamilton, J. L., & Wilson, S. A.
- Venue
- American Mineralogist
- Publisher
- Mineralogical Society of America
- Published
- 2018-10-01
- Volume
- 103
- Issue
- 10
- Pages
- 1649-1662
- ISSN
- 0003-004X (ISSN-L)
- 1945-3027
- OpenAlex
- W2894825906
- Cited by
- 26
- References
- 24
- FWCI
- 1.36
- Type
- journal article
- Language
- en
- Open access
- hybrid
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: Comparison of Rietveld-compatible structureless fitting analysis methods for accurate quantification of carbon dioxide fixation in ultramafic mine tailings. https://app.cochat.ai/papers/10.2138/am-2018-6515
- The paper
- Turvey, C. C., Hamilton, J. L., & Wilson, S. A. (2018). Comparison of Rietveld-compatible structureless fitting analysis methods for accurate quantification of carbon dioxide fixation in ultramafic mine tailings. American Mineralogist. https://doi.org/10.2138/am-2018-6515
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.