The DOI matches its Crossref record; 26 of the 26 references it cites were found in a registry or an index.
Formation of highly porous biodegradable scaffolds for tissue engineering
Open accessAbstract
In recent years, lack of donor organs has caused many to consider tissue engineering methods as means to replace diseased or damaged organs. This newly-emerging field uses tissue-specific cells in a three-dimensional organization, provided by a scaffolding material, to return functionality of the organ. For these applications, the choice of scaffolding material is crucial to the success of the technique. In addition to the chemical properties of the material, physical properties such as surface area for cell attachment are essential. Various methods of creating pores in these materials to increase surface area are reviewed here. Scaffolds formed using the different techniques, which include fiber bonding, solvent casting/particulate leaching, gas foaming and phase separation, are compared on the basis of porosity, pore size, and promotion of tissue growth.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Mesenchymal cell-based repair of large, full-thickness defects of articular cartilage.
Wakitani, S., Goto, T., Pineda, S. J., Young, R. G., Mansour, J. M., Caplan, A. I., & Goldberg, V. M. (1994) · The Journal of Bone & Joint Surgery · doi:10.2106/00004623-199404000-00013 · Cited by 1,605
Athanasiou, K. A., Niederauer, G. G., & Agrawal, C. M. (1996) · Biomaterials · doi:10.1016/0142-9612(96)85754-1 · Cited by 1,497
Preparation and characterization of poly(l-lactic acid) foams
Mikos, A. G., Thorsen, A. J., Czerwonka, L. A., Bao, Y., Langer, R., Winslow, D. N., & Vacanti, J. P. (1994) · Polymer · doi:10.1016/0032-3861(94)90953-9 · Cited by 1,187
Self-citationMooney, D. J., Baldwin, D. F., Suh, N. P., Vacanti, J. P., & Langer, R. (1996) · Biomaterials · doi:10.1016/0142-9612(96)87284-x · Cited by 1,085
Review: tissue engineering for regeneration of articular cartilage
Temenoff, J. S., & Mikos, A. G. (2000) · Biomaterials · doi:10.1016/s0142-9612(99)00213-6 · Cited by 1,052
Self-citationBone formation by three-dimensional stromal osteoblast culture in biodegradable polymer scaffolds
Ishaug, S. L., Crane, G. M., Miller, M. J., Yasko, A. W., Yaszemski, M. J., & Mikos, A. G. (1997) · Journal of Biomedical Materials Research · doi:10.1002/(sici)1097-4636(199707)36:1<17::aid-jbm3>3.0.co;2-o · Cited by 833
Self-citationLaminated three-dimensional biodegradable foams for use in tissue engineering
Mikos, A. G., Sarakinos, G., Leite, S. M., Vacant, J. P., & Langer, R. (1993) · Biomaterials · doi:10.1016/0142-9612(93)90049-8 · Cited by 666
Self-citationPorous biodegradable polymeric scaffolds prepared by thermally induced phase separation
Nam, Y. S., & Park, T. G. (1999) · Journal of Biomedical Materials Research · doi:10.1002/(sici)1097-4636(199910)47:1<8::aid-jbm2>3.0.co;2-l · Cited by 650
A novel method to fabricate bioabsorbable scaffolds
Whang, K., Thomas, C. H., Healy, K. E., & Nuber, G. (1995) · Polymer · doi:10.1016/0032-3861(95)93115-3 · Cited by 639
Preparation of poly(glycolic acid) bonded fiber structures for cell attachment and transplantation
Mikos, A. G., Bao, Y., Cima, L. G., Ingber, D. E., Vacanti, J. P., & Langer, R. (1993) · Journal of Biomedical Materials Research · doi:10.1002/jbm.820270207 · Cited by 606
Self-citationNam, Y. S., Yoon, J. J., & Park, T. G. (2000) · Journal of Biomedical Materials Research · doi:10.1002/(sici)1097-4636(2000)53:1<1::aid-jbm1>3.0.co;2-r · Cited by 577
Injectable biodegradable materials for orthopedic tissue engineering
Temenoff, J. S., & Mikos, A. G. (2000) · Biomaterials · doi:10.1016/s0142-9612(00)00108-3 · Cited by 554
Self-citationThree-dimensional culture of rat calvarial osteoblasts in porous biodegradable polymers
Ishaug-Riley, S. L., Crane-Kruger, G. M., Yaszemski, M. J., & Mikos, A. G. (1998) · Biomaterials · doi:10.1016/s0142-9612(98)00021-0 · Cited by 496
Self-citationEvaluation of matrix scaffolds for tissue engineering of articular cartilage grafts
Grande, D. A., Halberstadt, C., Naughton, G., Schwartz, R., & Manji, R. (1997) · Journal of Biomedical Materials Research · doi:10.1002/(sici)1097-4636(199702)34:2<211::aid-jbm10>3.0.co;2-l · Cited by 439
Hydroxyapatite fiber reinforced poly(α-hydroxy ester) foams for bone regeneration
Thomson, R. C., Yaszemski, M. J., Powers, J. M., & Mikos, A. G. (1998) · Biomaterials · doi:10.1016/s0142-9612(98)00097-0 · Cited by 409
Self-citationBiodegradable polymeric microcellular foams by modified thermally induced phase separation method
Nam, Y. S., & Park, T. G. (1999) · Biomaterials · doi:10.1016/s0142-9612(99)00073-3 · Cited by 405
Hyaluronic acid‐based polymers as cell carriers for tissue‐engineered repair of bone and cartilage
Solchaga, L. A., Dennis, J. E., Goldberg, V. M., & Caplan, A. I. (1999) · Journal of Orthopaedic Research · doi:10.1002/jor.1100170209 · Cited by 396
Biodegradable polymer scaffolds to regenerate organs
Thomson, R. C., Wake, M. C., Yaszemski, M. J., & Mikos, A. G. (1995) · Advances in Polymer Science · doi:10.1007/3540587888_18 · Cited by 383
Self-citationStabilized polyglycolic acid fibre-based tubes for tissue engineering
Mooney, D. J., Mazzoni, C. L., Breuer, C., McNamara, K., Hern, D., Vacanti, J. P., & Langer, R. (1996) · Biomaterials · doi:10.1016/0142-9612(96)85756-5 · Cited by 382
Schugens, C., Maquet, V., Grandfils, C., Jerome, R., & Teyssie, P. (1996) · Journal of Biomedical Materials Research · doi:10.1002/(sici)1097-4636(199604)30:4<449::aid-jbm3>3.0.co;2-p · Cited by 316
Fabrication of Controlled Release Biodegradable Foams by Phase Separation
Lo, H., Ponticiello, M. S., & Leong, K. W. (1995) · Tissue Engineering · doi:10.1089/ten.1995.1.15 · Cited by 259
Macroporous polymer foams by hydrocarbon templating
Shastri, V. P., Martin, I., & Langer, R. (2000) · Proceedings of the National Academy of Sciences · doi:10.1073/pnas.97.5.1970 · Cited by 215
Poly(L-lactic acid) foams with cell seeding and controlled-release capacity
Lo, H., Kadiyala, S., Guggino, S. E., & Leong, K. W. (1996) · Journal of Biomedical Materials Research · doi:10.1002/(sici)1097-4636(199604)30:4<475::aid-jbm5>3.0.co;2-m · Cited by 177
Goldstein, A. S., Zhu, G. G., Morris, G. E., Meszlenyi, R. K., & Mikos, A. G. (1999) · Tissue Engineering · doi:10.1089/ten.1999.5.421 · Cited by 140
Self-citationStabilized polyglycolic acid fibre-based tubes for tissue engineering
Mooney, D. J., Mazzoni, C. L., Breuer, C. K., McNamara, K., Hern, D., Vacanti, J. P., & Langer, R. (1996) · Elsevier eBooks · doi:10.1016/b978-008045154-1.50017-4 · Cited by 18
Injectable Biodegradable Materials for Orthopaedic Tissue Engineering
Temenoff, J. S., & Mikos, A. G. (2002) · Springer eBooks · doi:10.1007/978-94-010-0305-6_16 · Cited by 7
Self-citation
Cited by
Three-Dimensional Scaffolds for Tissue Engineering Applications: Role of Porosity and Pore Size
Loh, Q. L., & Choong, C. (2013) · Tissue Engineering Part B: Reviews · doi:10.1089/ten.teb.2012.0437 · Cited by 2,668
Biodegradable synthetic polymers for tissue engineering
CSIRO Molecular Science, B. 1., & Gunatillake, P. (2003) · European Cells and Materials · doi:10.22203/ecm.v005a01 · Cited by 1,765
Poly-є-caprolactone based formulations for drug delivery and tissue engineering: A review
Dash, T. K., & Konkimalla, V. B. (2012) · Journal of Controlled Release · doi:10.1016/j.jconrel.2011.09.064 · Cited by 1,016
Polymeric materials for bone and cartilage repair
Puppi, D., Chiellini, F., Piras, A. M., & Chiellini, E. (2010) · Progress in Polymer Science · doi:10.1016/j.progpolymsci.2010.01.006 · Cited by 913
Poly (lactic acid)-based biomaterials for orthopaedic regenerative engineering
Narayanan, G., Vernekar, V. N., Kuyinu, E. L., & Laurencin, C. T. (2016) · Advanced Drug Delivery Reviews · doi:10.1016/j.addr.2016.04.015 · Cited by 484
Metadata
- Authors
- Mikos, A. G., & Temenoff, J. S.
- Venue
- Electronic Journal of Biotechnology
- Publisher
- Elsevier BV
- Published
- 2000-08-15
- Volume
- 3
- Issue
- 2
- ISSN
- 0717-3458 (ISSN-L)
- OpenAlex
- W4241286643
- Cited by
- 426
- References
- 26
- FWCI
- 3.70
- Type
- journal article
- Language
- en
- Open access
- hybrid
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.