The DOI matches its Crossref record; 8 of the 8 references it cites were found in a registry or an index.
Classification of Bulk Metallic Glasses by Atomic Size Difference, Heat of Mixing and Period of Constituent Elements and Its Application to Characterization of the Main Alloying Element
Open accessAbstract
Bulk metallic glasses (BMGs) have been classified according to the atomic size difference, heat of mixing (ÁH mix ) and period of the constituent elements in the periodic table.The BMGs discovered to date are classified into seven groups on the basis of a previous result by Inoue.The seven groups are as follows:Ln-LTM/BM and (G-VII) IIA-LTM/BM, where ETM, Ln, LTM, BM and IIA refer to early transition, lanthanide, late transition, group IIIB-IVB and group IIA-group metals, respectively.The main alloying element of ternary G-I, G-V and G-VII, ternary G-II and G-IV, and ternary G-VI BMGs is the largest, intermediate and smallest atomic radius compared to the other alloying elements, respectively.The main alloying element of ternary BMGs belonging to G-I, G-V, G-VI and G-VII is an element in the atomic pair with the largest and negative value of ÁH mix (ÁH mix L.N. ), while the main element of ternary BMGs belonging to G-II and G-IV is independent of the atomic pair with ÁH mix L.N. .The characteristics of the main element derived for the ternary BMGs are directly applicable to multicomponent BMGs belonging to G-I, G-II, G-IV (Mg-based BMGs), G-V and G-VII.The main element can be the larger-sized element in the atomic pair with ÁH mix L.N.or in the same group as the other elements for multicomponent BMGs belonging to G-III, G-IV (Be-containing Zr-based BMG) and G-VI.The main element of BMGs belonging to G-VI tends to change from the element with the smallest atomic radius in a ternary system to an element with a relatively large atomic size in a multicomponent system.The change is due to an increase in glass-forming ability through multicomponent alloying of BMGs belonging to G-VI.The results of the classification of BMGs obtained in the present study are important for further development of BMGs, with the results providing a road map for the development of new BMG compositions.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Stabilization of metallic supercooled liquid and bulk amorphous alloys
Inoue, A. (2000) · Acta Materialia · doi:10.1016/s1359-6454(99)00300-6 · Cited by 5,887
Self-citationA highly processable metallic glass: Zr41.2Ti13.8Cu12.5Ni10.0Be22.5
Peker, A., & Johnson, W. L. (1993) · Applied Physics Letters · doi:10.1063/1.110520 · Cited by 2,446
Inoue, A., Zhang, T., & Masumoto, T. (1990) · Materials Transactions, JIM · doi:10.2320/matertrans1989.31.177 · Cited by 922
Self-citationCalculations of Mixing Enthalpy and Mismatch Entropy for Ternary Amorphous Alloys
Takeuchi, A., & Inoue, A. (2000) · Materials Transactions, JIM · doi:10.2320/matertrans1989.41.1372 · Cited by 882
Self-citationAl–La–Ni Amorphous Alloys with a Wide Supercooled Liquid Region
Inoue, A., Zhang, T., & Masumoto, T. (1989) · Materials Transactions JIM · doi:10.2320/matertrans1989.30.965 · Cited by 834
Self-citationNew Amorphous Mg-Ce-Ni Alloys with High Strength and Good Ductility
Inoue, A., Ohtera, K., Kita, K., & Masumoto, T. (1988) · Japanese Journal of Applied Physics · doi:10.1143/jjap.27.l2248 · Cited by 544
Self-citationBulk glass formation in the Pd–Ni–P system
He, Y., Schwarz, R. B., & Archuleta, J. I. (1996) · Applied Physics Letters · doi:10.1063/1.117458 · Cited by 186
Nonequilibrium Phase Diagrams of Ternary Amorphous Alloys
Kawazoe, Y., Yu, J.-Z., Tsai, A.-P., & Masumoto, T. (1997) · Springer eBooks · doi:10.1007/b58222 · Cited by 69
Cited by
A critical review of high entropy alloys and related concepts
Miracle, D. B., & Senkov, O. N. (2017) · Acta Materialia · doi:10.1016/j.actamat.2016.08.081 · Cited by 8,973
Microstructures and properties of high-entropy alloys
Zhang, Y., Zuo, T. T., Tang, Z., Gao, M. C., Dahmen, K. A., Liaw, P. K., & Lu, Z. P. (2014) · Progress in Materials Science · doi:10.1016/j.pmatsci.2013.10.001 · Cited by 7,128
Prediction of high-entropy stabilized solid-solution in multi-component alloys
Yang, X., & Zhang, Y. (2012) · Materials Chemistry and Physics · doi:10.1016/j.matchemphys.2011.11.021 · Cited by 2,920
Effect of valence electron concentration on stability of fcc or bcc phase in high entropy alloys
Guo, S., Ng, C., Lu, J., & Liu, C. T. (2011) · Journal of Applied Physics · doi:10.1063/1.3587228 · Cited by 2,911
Phase stability in high entropy alloys: Formation of solid-solution phase or amorphous phase
GUO, S., & LIU, C. T. (2011) · Progress in Natural Science: Materials International · doi:10.1016/s1002-0071(12)60080-x · Cited by 2,534
Atomic-level structure and structure–property relationship in metallic glasses
Cheng, Y. Q., & Ma, E. (2011) · Progress in Materials Science · doi:10.1016/j.pmatsci.2010.12.002 · Cited by 1,771
High-entropy alloys: a critical assessment of their founding principles and future prospects
Pickering, E. J., & Jones, N. G. (2016) · International Materials Reviews · doi:10.1080/09506608.2016.1180020 · Cited by 1,062
Exploration and Development of High Entropy Alloys for Structural Applications
Miracle, D., Miller, J., Senkov, O., Woodward, C., Uchic, M., & Tiley, J. (2014) · Entropy · doi:10.3390/e16010494 · Cited by 1,012
A review on fundamental of high entropy alloys with promising high–temperature properties
Chen, J., Zhou, X., Wang, W., Liu, B., Lv, Y., Yang, W., Xu, D., & Liu, Y. (2018) · Journal of Alloys and Compounds · doi:10.1016/j.jallcom.2018.05.067 · Cited by 919
Accelerated exploration of multi-principal element alloys with solid solution phases
Senkov, O. N., Miller, J. D., Miracle, D. B., & Woodward, C. (2015) · Nature Communications · doi:10.1038/ncomms7529 · Cited by 871
Highly efficient decomposition of ammonia using high-entropy alloy catalysts
Xie, P., Yao, Y., Huang, Z., Liu, Z., Zhang, J., Li, T., Wang, G., Shahbazian-Yassar, R., Hu, L., & Wang, C. (2019) · Nature Communications · doi:10.1038/s41467-019-11848-9 · Cited by 813
High-entropy Alloys with High Saturation Magnetization, Electrical Resistivity and Malleability
Zhang, Y., Zuo, T., Cheng, Y., & Liaw, P. K. (2013) · Scientific Reports · doi:10.1038/srep01455 · Cited by 690
Youssef, K. M., Zaddach, A. J., Niu, C., Irving, D. L., & Koch, C. C. (2015) · Materials Research Letters · doi:10.1080/21663831.2014.985855 · Cited by 645
Kumar, N. A. P. K., Li, C., Leonard, K. J., Bei, H., & Zinkle, S. J. (2016) · Acta Materialia · doi:10.1016/j.actamat.2016.05.007 · Cited by 627
Machine-learning phase prediction of high-entropy alloys
Huang, W., Martin, P., & Zhuang, H. L. (2019) · Acta Materialia · doi:10.1016/j.actamat.2019.03.012 · Cited by 556
Liu, W. H., He, J. Y., Huang, H. L., Wang, H., Lu, Z. P., & Liu, C. T. (2015) · Intermetallics · doi:10.1016/j.intermet.2015.01.004 · Cited by 513
Electronic and thermodynamic criteria for the occurrence of high entropy alloys in metallic systems
Poletti, M. G., & Battezzati, L. (2014) · Acta Materialia · doi:10.1016/j.actamat.2014.04.033 · Cited by 501
Fu, Z., Chen, W., Wen, H., Zhang, D., Chen, Z., Zheng, B., Zhou, Y., & Lavernia, E. J. (2016) · Acta Materialia · doi:10.1016/j.actamat.2016.01.050 · Cited by 501
Chen, R., Qin, G., Zheng, H., Wang, L., Su, Y., Chiu, Y., Ding, H., Guo, J., & Fu, H. (2018) · Acta Materialia · doi:10.1016/j.actamat.2017.10.058 · Cited by 469
Dynamic relaxations and relaxation-property relationships in metallic glasses
Wang, W. H. (2019) · Progress in Materials Science · doi:10.1016/j.pmatsci.2019.03.006 · Cited by 469
A hexagonal close-packed high-entropy alloy: The effect of entropy
Zhao, Y. J., Qiao, J. W., Ma, S. G., Gao, M. C., Yang, H. J., Chen, M. W., & Zhang, Y. (2016) · Materials & Design · doi:10.1016/j.matdes.2016.01.149 · Cited by 446
Review and outlook on high-entropy alloys for hydrogen storage
Marques, F., Balcerzak, M., Winkelmann, F., Zepon, G., & Felderhoff, M. (2021) · Energy & Environmental Science · doi:10.1039/d1ee01543e · Cited by 442
A high-entropy alloy with hierarchical nanoprecipitates and ultrahigh strength
Fu, Z., Jiang, L., Wardini, J. L., MacDonald, B. E., Wen, H., Xiong, W., Zhang, D., Zhou, Y., Rupert, T. J., Chen, W., et al. (2018) · Science Advances · doi:10.1126/sciadv.aat8712 · Cited by 406
Microstructure and oxidation behavior of new refractory high entropy alloys
Liu, C. M., Wang, H. M., Zhang, S. Q., Tang, H. B., & Zhang, A. L. (2014) · Journal of Alloys and Compounds · doi:10.1016/j.jallcom.2013.08.102 · Cited by 390
Boron doped ultrastrong and ductile high-entropy alloys
Seol, J. B., Bae, J. W., Li, Z., Chan Han, J., Kim, J. G., Raabe, D., & Kim, H. S. (2018) · Acta Materialia · doi:10.1016/j.actamat.2018.04.004 · Cited by 375
Liquid metal for high-entropy alloy nanoparticles synthesis
Cao, G., Liang, J., Guo, Z., Yang, K., Wang, G., Wang, H., Wan, X., Li, Z., Bai, Y., Zhang, Y., et al. (2023) · Nature · doi:10.1038/s41586-023-06082-9 · Cited by 375
Takeuchi, A., Amiya, K., Wada, T., Yubuta, K., & Zhang, W. (2014) · JOM · doi:10.1007/s11837-014-1085-x · Cited by 367
Self-citationNbTaV-(Ti,W) refractory high-entropy alloys: Experiments and modeling
Yao, H. W., Qiao, J. W., Gao, M. C., Hawk, J. A., Ma, S. G., Zhou, H. F., & Zhang, Y. (2016) · Materials Science and Engineering: A · doi:10.1016/j.msea.2016.07.102 · Cited by 361
Thermomechanical processing of metallic glasses: extending the range of the glassy state
Sun, Y., Concustell, A., & Greer, A. L. (2016) · Nature Reviews Materials · doi:10.1038/natrevmats.2016.39 · Cited by 353
Joseph, J., Jarvis, T., Wu, X., Stanford, N., Hodgson, P., & Fabijanic, D. M. (2015) · Materials Science and Engineering: A · doi:10.1016/j.msea.2015.02.072 · Cited by 343
Machine learning guided appraisal and exploration of phase design for high entropy alloys
Zhou, Z., Zhou, Y., He, Q., Ding, Z., Li, F., & Yang, Y. (2019) · npj Computational Materials · doi:10.1038/s41524-019-0265-1 · Cited by 327
Microstructure and mechanical properties of multi-component AlCrFeNiMox high-entropy alloys
Dong, Y., Lu, Y., Kong, J., Zhang, J., & Li, T. (2013) · Journal of Alloys and Compounds · doi:10.1016/j.jallcom.2013.03.253 · Cited by 323
Effect of Al addition on mechanical properties and microstructure of refractory AlxHfNbTaTiZr alloys
Lin, C.-M., Juan, C.-C., Chang, C.-H., Tsai, C.-W., & Yeh, J.-W. (2015) · Journal of Alloys and Compounds · doi:10.1016/j.jallcom.2014.11.064 · Cited by 317
Negative mixing enthalpy solid solutions deliver high strength and ductility
An, Z., Li, A., Mao, S., Yang, T., Zhu, L., Wang, R., Wu, Z., Zhang, B., Shao, R., Jiang, C., et al. (2024) · Nature · doi:10.1038/s41586-023-06894-9 · Cited by 316
Feuerbacher, M., Heidelmann, M., & Thomas, C. (2015) · Materials Research Letters · doi:10.1080/21663831.2014.951493 · Cited by 308
Machine learning for phase selection in multi-principal element alloys
Islam, N., Huang, W., & Zhuang, H. L. (2018) · Computational Materials Science · doi:10.1016/j.commatsci.2018.04.003 · Cited by 302
Ji, W., Fu, Z., Wang, W., Wang, H., Zhang, J., Wang, Y., & Zhang, F. (2014) · Journal of Alloys and Compounds · doi:10.1016/j.jallcom.2013.11.146 · Cited by 290
Solid-solution strengthening in refractory high entropy alloys
Coury, F. G., Kaufman, M., & Clarke, A. J. (2019) · Acta Materialia · doi:10.1016/j.actamat.2019.06.006 · Cited by 290
Xiong, J., Shi, S.-Q., & Zhang, T.-Y. (2020) · Materials & Design · doi:10.1016/j.matdes.2019.108378 · Cited by 285
Microstructure and mechanical properties of CoCrFeNiZrx eutectic high-entropy alloys
Huo, W., Zhou, H., Fang, F., Xie, Z., & Jiang, J. (2017) · Materials & Design · doi:10.1016/j.matdes.2017.08.030 · Cited by 281
Phase separation in metallic glasses
Kim, D. H., Kim, W. T., Park, E. S., Mattern, N., & Eckert, J. (2013) · Progress in Materials Science · doi:10.1016/j.pmatsci.2013.04.002 · Cited by 280
Tensile properties of low-stacking fault energy high-entropy alloys
Zaddach, A. J., Scattergood, R. O., & Koch, C. C. (2015) · Materials Science and Engineering: A · doi:10.1016/j.msea.2015.03.109 · Cited by 278
Effect of Niobium on Microstructure and Properties of the CoCrFeNb Ni High Entropy Alloys
Jiang, H., Jiang, L., Qiao, D., Lu, Y., Wang, T., Cao, Z., & Li, T. (2017) · Journal of Materials Science & Technology · doi:10.1016/j.jmst.2016.09.016 · Cited by 275
Kunce, I., Polanski, M., & Bystrzycki, J. (2013) · International Journal of Hydrogen Energy · doi:10.1016/j.ijhydene.2013.05.071 · Cited by 273
Li, T., Wang, S., Fan, W., Lu, Y., Wang, T., Li, T., & Liaw, P. K. (2023) · Acta Materialia · doi:10.1016/j.actamat.2023.118728 · Cited by 273
Senkov, O. N., & Miracle, D. B. (2016) · Journal of Alloys and Compounds · doi:10.1016/j.jallcom.2015.10.279 · Cited by 261
Alloying behavior, microstructure and mechanical properties in a FeNiCrCo0.3Al0.7 high entropy alloy
Chen, W., Fu, Z., Fang, S., Xiao, H., & Zhu, D. (2013) · Materials & Design · doi:10.1016/j.matdes.2013.04.061 · Cited by 255
Phase transformations of HfNbTaTiZr high-entropy alloy at intermediate temperatures
Chen, S. Y., Tong, Y., Tseng, K.-K., Yeh, J.-W., Poplawsky, J. D., Wen, J. G., Gao, M. C., Kim, G., Chen, W., Ren, Y., et al. (2019) · Scripta Materialia · doi:10.1016/j.scriptamat.2018.08.032 · Cited by 254
Modeling solid solution strengthening in high entropy alloys using machine learning
Wen, C., Wang, C., Zhang, Y., Antonov, S., Xue, D., Lookman, T., & Su, Y. (2021) · Acta Materialia · doi:10.1016/j.actamat.2021.116917 · Cited by 254
Structural transformation and superconductivity in carbon-added hexagonal high-entropy alloys
Zhu, Q., Xiao, G., Cui, Y., Yang, W., Song, S., Cao, G.-H., & Ren, Z. (2022) · Journal of Alloys and Compounds · doi:10.1016/j.jallcom.2022.164700 · Cited by 23
Effect of Fe and Ni on the mechanical properties and deformation behavior of Co3Ti based alloys
Zhu, X., Fang, Y., Feng, Q., Wang, N., Xiao, L., & Xu, Y. (2024) · Journal of Applied Physics · doi:10.1063/5.0222982 · Cited by 3
Metadata
- Authors
- Takeuchi, A., & Inoue, A.
- Venue
- MATERIALS TRANSACTIONS
- Publisher
- Japan Institute of Metals
- Published
- 2005
- Volume
- 46
- Issue
- 12
- Pages
- 2817-2829
- ISSN
- 1345-9678 (ISSN-L)
- 1347-5320
- OpenAlex
- W2168686241
- Cited by
- 4,909
- References
- 8
- FWCI
- 46.90
- Type
- journal article
- Language
- en
- Open access
- bronze
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.